Modern wireless headphones have become an essential feature of everyday life, offering freedom of movement and no entangled wires. Xiaomi Mi True Wireless Earbuds Basic 2s has proven to be an affordable and reliable solution that combines high-quality sound and ergonomic design. However, the initial setup of the device may raise questions for users who are first to encounter the Mi True ecosystem.
The process of activating a gadget does not require deep technical knowledge, but knowing certain nuances greatly speeds up the procedure and helps to avoid typical errors. In this article, we will discuss in detail all the steps, from extracting from the case to configuring Bluetooth connections on various operating systems.
Understanding the logic behind the indicators and control buttons will not only allow you to connect your device quickly, but also to manage it effectively in the future. Let’s start to consider in detail all the steps necessary to start using your new audio gadget.
Primary activation and preparation of the device
The first step before any interaction with a smartphone is to physically activate the headphones correctly. Often new devices come with battery-operated protective insulators that need to be removed to start charging and running. Open the charge case cover and carefully inspect the inside where the charging contacts are located.
If you find clear plastic stickers on the headphones themselves, carefully remove them. After that, place both Mi True Wireless Earbuds Basic 2s back in the case. The indicators on the headphones should light up red, signaling the start of the charging process. If the indicators do not burn, make sure the contacts are clean and fit tightly together.
Leave the device to charge for at least 30-40 minutes before first use, which is necessary to calibrate the power controller and ensure stable operation of the Bluetooth module. Full charging of the case and headphones takes about 1.5 hours, as reported by the dimmed indicator on the case.
⚠️ Warning: Do not try to turn on the headphones if the indicators show a low charge or flash red. Attempting to pair when the battery is discharged can lead to malfunction or a connection break.
💡
Before first use, wipe the metal contacts on the headphones and inside the case with dry lilaless fabric to ensure a better connection.
Conjugation mode and state indication
Once the device has received enough charge, you need to put it into search mode. Remove both earphones from the charging case at the same time. Automatically turn on the pairing mode, which is signaled by a fast-blinking white-blue indicator on one of the headphones (usually on the right, which is the master device).
It's important to understand the logic of the indicators so you don't get confused about the status of the device. Slow blinking in white means that the headphone is connected to the smartphone and ready to play the sound. If the indicator flashes in blue, it indicates that Bluetooth is active, but the connection to the phone has not yet been established.
If the search mode does not automatically start, you can force it to activate, press and hold the touch zone on both headphones for 5-7 seconds before the characteristic audible signal appears, and then the device will become visible to external gadgets.
What do the color of the indicators mean?
Connection to Android-based smartphones
Owners of Android devices have the advantage of having a wide range of customization and stable connections. To start, open your smartphone settings and go to Settings → Bluetooth. Make sure the wireless slider is activated and lit in green or blue.
Click on the "Search for Devices" or "Add a New Device" button. The list of available gadgets should appear as Mi True Wireless EBs Basic 2S. Click on it to begin the mating procedure. The system can request confirmation of an action to which you need to respond with consent.
Once you've successfully connected, you'll have a Connected status next to the headset name, and you can run any media file to check the audio signal, and if you only have one headphone, try putting both in the case, closing it, and retrieving it.
☑️ Checking Android Connectivity
It’s worth noting that some smartphone makers, like Xiaomi or Redmi, may offer a pop-up with animation when opening a case next to the phone.This is a quick-to-connect feature that simplifies the process, but the standard method through settings remains universal for all models.
Setting up a connection with iPhone and iOS
Apple ecosystem users can also use the model without any problems, although the functionality may be slightly limited compared to the original AirPods. The process begins similarly: turn Bluetooth on the Settings → Bluetooth menu on your iPhone or iPad.
Remove the headphones from the case to activate detection mode. On the smartphone screen, Mi True Wireless EBs Basic 2S will appear in the available devices section. Tap the name to initialize the connection. Unlike Android, it does not require installing additional applications for basic functionality.
Once paired, iOS will automatically remember the device, and when you use it later, the headphones will automatically connect as soon as you open the case next to the phone, if Bluetooth is on, which provides a high level of comfort for daily use.
⚠️ Note: Sensor management may work differently on iOS devices than on Android. Check Universal Access settings if standard gestures are not performed.
Use the Mi True Wireless Earbuds app
For advanced functionality and fine-tuning, a dedicated application is recommended. Although the Basic 2s basic model has limited software functionality compared to older versions, an application may be required to update the firmware or test battery power with high accuracy.
Download the official Xiaomi Earbuds app or Mi True Wireless Earbuds from Google Play or the App Store. Launch the program and follow the on-screen instructions to add a new device. The app scans the space and finds your headphones.
Inside the app, you can see the exact percentage of charge of each headphone separately, which is impossible to do with standard smartphone tools, and you can also find gesture instructions and the latest connected devices in history.
| Function | No app. | With an annex |
|---|---|---|
| Exact % charge. | Approximately. | To 1%. |
| Update of the PO | Impossible. | Available. |
| Headphone search | No. | There's (last place) |
| Customization of gestures | Standard. | Extended (if supported) |
Gesture management and sensory interaction
Xiaomi Mi True Wireless Earbuds Basic 2s features touch panels located on the outside of each headphone, controlled by a series of touches that you need to remember for comfortable use. Single touch is usually responsible for playing or pausing the track.
Double tapping the right earbud is often designed to answer an incoming call or activate the voice assistant, depending on the settings. Double tapping the left earbud can serve to skip the track or activate low latency game mode, which is critical for gamers.
Triple taps tend to call up the last dialed number or switch tracks in reverse. It's important to apply the touch clearly and confidently, but without putting too much pressure on the touch layer. If the control doesn't respond, wipe the headphone surface with dry cloth.
💡
Remember the sequence of touches: 1 click - pause, 2 clicks - assistant / track, 3 clicks - back / call. Accuracy of hitting the touch zone is critical.
Resetting settings and solving connection problems
In the process of operation, you can experience situations where the headphones stop syncing with each other or can not see the phone, in which case you need to reset to the factory settings, this is a standard procedure that eliminates software failures.
To do the reset, place both earbuds in the case, leaving the lid open. Press and hold the touch zones on both earbuds simultaneously for 20 seconds. The indicators must flash red three times, then go out. This means that the device memory is cleared.
After reset, you need to remove the device from the Bluetooth list on your smartphone (“Forget the device”) and perform the pairing procedure again, as described in the previous sections, often solving the problems of desynchronizing the left and right channels.
⚠️ Attention: After reset, the headphones may lose communication with each other. If this happens, remove both earphones at the same time and wait until one stops blinking and the other starts blinking slowly - which means they found each other again.