Many users of Xiaomi wireless headphones face the unpleasant situation when devices stop working in pairs. Instead of connecting with each other and transmitting stereo sound, they begin to appear in the smartphone's Bluetooth list as two separate devices.
Modern. TWS-The True Wireless Stereo headset is designed to have one headphone as a master and the other as a slave, or it connects directly through a special protocol, and if this connection is broken, the user hears only one side of the sound or sees a name duplicate in the phone menu. To restore normal operation, a number of consecutive actions must be performed, which we will consider in detail.
Reconciling the pairing between the left and right Mi True Wireless Earbuds takes only a few minutes. It's important not to panic or try to connect them to the phone separately, as this will only exacerbate the problem. The right algorithm of actions will allow you to enjoy surround sound and full-fledged work of the gadget again.
Reasons for desynchronization of headphones Xiaomi
Before we get into action, we need to understand why the Bluetooth protocol actually fails, and most often the problem is a software failure that occurs when one of the headphones is discharged before the other, and when one module is turned off and the other is still working, the connection between them is broken, and when they are turned on again, they can not find each other.
It can also be interference from other wireless devices or a failed firmware update, sometimes the user accidentally activates pairing mode on one earphone while the other is still connected to the phone, which confuses the logic of the work. TWS-Understanding the cause helps prevent a repeat of the situation in the future.
In rare cases, the mobile device itself is to blame for remembering incorrect connection parameters. Caching old data can prevent the establishment of a new stable communication channel, so it is recommended to delete old device records from the phone’s memory before setting up the headset.
⚠️ Warning: Don’t force your headphones to connect via your smartphone’s Bluetooth menu, choosing them separately, which will result in mono-sound mode where both channels play on only one speaker.
💡
If one headphone is completely discharged, let both headphones lie in the charging case for at least 30 minutes before the recovery procedure begins.
Preparation for reconnection
The first step to solving the problem is to completely clean up your connection history. You need to go to your smartphone or tablet's Bluetooth settings. Find the name of your headphones (for example, Mi True Wireless Earbuds Basic or Redmi Airdots) on the list of available devices.
Click on the gear icon or information icon next to the device name and select Forget the device or Unpair. This action is critical because it deletes all stored encryption keys and communication settings. If you have two identical names on the list, delete both.
After that, it is recommended to turn off Bluetooth on the phone completely, which will stop attempts to automatically reconnect and give the system time to clean temporary files, and now your headphones are ready for the procedure of forced synchronization with each other.
- 📱 Remove the device from the list of conjugated in the phone settings.
- 📶 Turn off the Bluetooth module on your smartphone.
- 🔋 Make sure the headphones are charged enough (at least 50%).
- 🧹 Clean the charging contacts on headphones if they are contaminated.
Instructions for alternate connection (Method 1)
There are several ways to make headphones work in pairs again. The first method, often referred to as the "dominance method," is suitable for most Xiaomi Airdots and Redmi Airdots models. It is based on a forced switching of the wizard role.
Take one headphone (like the right one) and put it back in the charging case, or just turn it off if the model allows. The left earphone should stay in your hands. Now turn on Bluetooth on your phone and search for the devices. You should see the name of one headphone. Connect to it.
Once the sound is successfully connected, it's gone, or it's quiet. Now, take the second earpiece out of the case, and they have to detect each other and sync, and if the speakers have stereo sound and there's one name left on the phone, the procedure is a success.
☑️ Algorithm of alternate connection
If this method doesn’t work and the phone still sees two devices, move on to a more radical method, Hard Reset, which is the most effective method for eliminating deep software errors.
Full reset (Hard Reset)
Factory reset is a versatile solution for electronic gadgets. In the case of Xiaomi headphones, this procedure causes them to forget all previous connections and return to the “out of the box” state when they were first removed from the package.
To perform the reset, place both earbuds in a charge case. Make sure they fit tightly to the contacts and the indicators are lit (usually in red), signaling charging. If the indicators are not burning, wipe the contacts dry.
Take both earbuds out of the case at the same time. They should catch fire (usually flashing white or red, depending on the model). Now you need to quickly press and hold the touch zones on both headphones at the same time. You need to hold it for about 20 seconds. First, the indicators can flash, then go out, and then light up again. The moment when they flash red (or blink quickly white) for the second time - and there is a reset moment.
| Action. | Indication | Duration |
|---|---|---|
| Extracting from the case | Blinking white/red | Instantly. |
| Press sensors | Continuous combustion | 5-10 seconds |
| Discharge regime | Double flashing or red light | 15-20 seconds |
| Ready for | Fast flashing white | After discharge |
⚠️ Warning: During the reset procedure, do not release the touch panels early. If you release your fingers before the double blinking, the reset will not occur, and the headphones will simply turn off.
Post-discharge conjugation and performance check
Once Hard Reset is successfully executed, the headphones go into pairing standby mode. The indicators should start flashing white quickly, which means the device is looking for a partner. At this stage, it is important not to connect them to the phone right away.
Put both earbuds next to each other on the table. 10-15 At this point, one of the headphones (usually the one that was removed first, or the right one) should stop blinking fast and start blinking slowly (once in a row). 2-3 It's a signal that TWS-The link between left and right module is established.
Now you can turn on Bluetooth on your smartphone and start searching. Only one device with the name of your model should appear on the list, click on it to connect, and once you connect, the voice assistant will report status: "Connected" or "Connected."
What to do if the indicators do not flash?
Features of connection for different models
Xiaomi’s line of wireless headphones is extensive, and the procedure may vary slightly depending on the particular model.For example, for the Mi True Wireless Earbuds Basic 2, the reset procedure may require holding the sensor for 30 seconds instead of 20.
Redmi Buds 3 Pro or Mi True Wireless Earphones 2 models often support Mi Home or Xiaomi Earbuds. These apps can reset software, without dancing with tambourine and holding sensors. This is a more reliable way if you have an Android smartphone.
Older models, like the first Airdots, have no application, so mechanical reset is the only way, and you can experimentally determine which one to turn on first with the alternate connection method.
- 🎧 Basic/Youth: Mechanical reset by sensor retention 20 sack.
- 📱 Pro version: Support for Xiaomi Earbuds app for customization.
- 🔄 Hybrid models: Automatic reconnection when opening the case.
💡
There is no universal timer for all models: if 20 seconds did not help, try holding the sensors for 30 or even 40 seconds until a specific reset indication appears.