Modern wireless headsets have become an integral part of the digital lifestyle, offering freedom of movement and high-quality sound. Xiaomi Air 2 SE is deservedly popular due to the optimal balance of price, autonomy and ergonomic case design. However, the initial setup and proper pairing can raise questions for users who are first encountering the ecosystem of smart devices of this brand.
The connection process does not require deep technical knowledge, but has its own nuances, ignoring which can lead to problems with connection stability. In this article, we will discuss in detail the algorithm of actions for Android and iOS operating systems, as well as work with a proprietary application for advanced functionality.
To get started, make sure both gadgets are charged, as a dead battery often causes the device to be invisible in the list of available networks. The right sequence of actions ensures a fast and reliable connection that will work steadily in the future. Let's move on to the immediate preparation of the equipment before start.
Preparation of headphones and smartphone for pairing
The first step before activating the search mode is to make sure that the battery level is sufficient. If the case or the headphones themselves are discharged to zero, they may not turn on or instantly turn off during the setup process. It is recommended to put the case on charge for at least 15-20 minutes before the procedure to prevent sudden shutdown.
It's also worth checking whether Bluetooth is on your smartphone and is not in flight mode. Sometimes the Android or iOS system can "hang" in search of old devices, so it's helpful to reboot the wireless module. Just turn off and turn on Bluetooth again in your phone's Quick Settings Panel.
⚠️ Warning: If the headphones were previously connected to another smartphone, they may try to connect to it automatically, ignoring your current phone, in which case you need to temporarily turn off Bluetooth on the old device.
An important aspect is the cleanness of the charging contacts on the headphones themselves. Oxidation or contamination can interfere with normal charging and operation of indicators that signal readiness to (mating).
Step-by-step instructions for connecting to Android
Android has a lot of peripheral control, and the connection process is as standardized as possible. First, remove both headphones from the charging case at the same time, at which point the indicators should light up, signaling that you are on and on standby.
On your smartphone screen, open your settings and go to the Bluetooth section. Make sure the switch is active and wait for the list of available devices to appear. The list should display the name Xiaomi Air 2 SE, sometimes with an “L” or “R” if the devices are not already synchronized with each other.
Tap the name of the device in the list. The system will request confirmation to create a pair, after which a short audible confirmation will occur in the headphones themselves. If the connection is successful, the status bar will display an icon of the battery level of the headset.
☑️ Checking Android Connectivity
In some cases, especially on older versions of Android, manual input may be required. PIN-It's usually a standard combination of 0000 or 1234, but modern security protocols allow you to do without this step.
Connection with iPhone and iOS devices
Apple owners can also make full use of the model, although some features may be limited to the lack of support for proprietary codecs. The process on iOS is even easier thanks to the optimized interface.
Open your iPhone settings, select the Bluetooth section, and find your gadget in the “Other Devices” list. Click on the name Xiaomi Air 2 SE. The iOS system will automatically determine the type of device and set the necessary profiles for audio transmission and microphone operation.
It’s worth noting that iOS doesn’t have the quick-setting pop-up that the original AirPods do, but the basic connection is instantaneous. Once paired successfully, the headphones will automatically connect every time you pull out of the case while the Bluetooth on the phone is active.
Why does the iPhone only show one headphone?
To test the quality of the connection, you can play any track or video. If the sound is only going to one channel, put the headphones back in the case, close the lid and open again - they should reconnect and sync with each other.
Setup through the Xiaomi Earbuds app
To unlock the full potential of the headset, such as updating the firmware and adjusting the touch control, it is recommended to use specialized software. The official Xiaomi Earbuds app (or Mi True Wireless in some regions) is available on Google Play and the App Store. It allows you to configure the behavior of the device in detail.
Once you have the app installed and your headphones connected, you can start the scan, and it will suggest adding a new device, finding your headphones within range, and inside the interface, you can see the exact percentage of charge for the left, right earphone and case, which is much more informative than the standard system indicator.
| Function | Description | Availability |
|---|---|---|
| Update of the PO | Install new versions of Firmware to improve stability | Only in the annex |
| Sensory management | Set up actions for double or triple touch | Complete. |
| Headphone search | Audible signal to search for a lost device | Only in the annex |
| Game mode | Reduced Sound Delay (Low Latency) | Depends on the software version. |
Special attention should be paid to the software update section. Manufacturers regularly release patches that eliminate connection bugs and improve microphone noise reduction. Never interrupt the firmware update process, as this can lead to irreversible failure of the headphones (bricking).
Control of touch panels and gestures
Xiaomi Air 2 SE has touch zones on the leg of each earphone that respond to touch. By default, the settings may not be ideal for all users, so they are worth checking. Usually, double tap is responsible for pause or response to a call, and triple tap is responsible for calling a voice assistant or switching a track.
You can reassign functions through the app, for example, you can set the right earbud to control music and the left earbud to control calls, and this prevents random activation when you adjust the headset in your ear.
- 🎵 Double touch: Playback / Pause / Answer to the call
- 📞 Triple touch: Next track / Voice assistant
- 📵 Retention (2 seconds): Call Deflection/Reboot (on some software versions)
⚠️ Warning: Touch panels are sensitive to moisture. If you just left the gym or were caught in the rain, wipe your headphones before use, otherwise the touches may not be read or triggered chaotically.
If the gestures stopped responding, there may have been software desynchronization, which helps reset the settings to the factory, which we'll discuss in the next section, and also make sure that you're touching the touch area, rather than just pressing the earpiece against your ear.
💡
For better recognition of the voice assistant, say the command immediately after triple touch, without waiting for the sound signal in the headphones, since the delay in sound transmission can be noticeable.
Resetting and elimination
In the process of operation, you can experience situations where one earphone stops working, the sound becomes quiet or the devices stop seeing each other. In most cases, a full reset helps. To do this, place both earphones in the case and leave the lid open.
Find the touch zones on both headphones, you need to touch them simultaneously and hold them for about 20 seconds, the indicators should flash red several times, which signals a successful reset to the factory settings, and then you will need to do the pairing procedure again, removing the old device from the Bluetooth list of the phone.
A common problem is to desynchronize a stereo pair when the sound is coming from only one channel. This is treated by the following algorithm: remove the device from Bluetooth on the phone, turn off Bluetooth on the phone, put the headphones in the case, close the lid, open in 10 seconds and try to connect again.
💡
90% of Connection Problems TWS-headphones are solved by completely removing the device from the phone memory and re-pairing after resetting the headphones themselves through the retention of sensors.
If the headphones are quickly discharged or not charged in a case, check the contacts. Sometimes cleaning the contacts with an alcohol wipe helps. Also, the problem can be in the charging cable: use only certified cables with a current of no more than 1A so as not to damage the power controller.