How to connect the robot vacuum cleaner Xiaomi Mijia G1 to Mi Home: full instruction

Why is it important to connect the Mijia G1 to the Mi Home?

Xiaomi Mijia G1 is not just a cleaning device, but a full-fledged element of the smart home ecosystem. Without the right connection to the Mi Home application, you lose half of the functionality: remote control, schedule settings, room maps and integration with other Xiaomi devices (for example, sensors or speakers). Many users experience errors in the first pairing — the device does not find the network, the application does not see the vacuum cleaner, or the process is suspended during the firmware update phase.

In this article, we will discuss the step-by-step connection algorithm, taking into account all the nuances from router preparation to solving typical errors. We will pay special attention to updating the firmware through alternative methods if the standard method does not work - this information is not in the official documentation, but is critical for owners of devices with an outdated version of the software. You will also learn how to avoid resetting when reconnecting to a new Wi-Fi and why the Mijia G1 can "lose" communication with the application after an update.

Preparation before connection: 5 mandatory steps

Before you start pairing, make sure all the preconditions are met, and neglecting them is the main cause of 70% of connection errors.

• 📶 Router and Wi-Fi network: the device supports only networks 2.4 GHz. If your router is running 5 GHz 2.4/5 GHz Auto, divide the networks in the router settings. Network name (SSID) must not contain Cyrillic, spaces or special symbols (only Latin letters, numbers and hyphen are allowed).
• 📱 Mi Home app: Install the latest version from Google Play or App Store. Older versions (up to 6.0) may not support Mijia G1.
• 🔋 Battery charge: vacuum cleaner should be charged at least 30%. If the indicator flashes red, connect it to the docking station for 10-15 minutes.
• 🌍 Region in Mi Home: Select China (China) or Russia (if available) in your profile settings. For some Mijia games G1 Only the Chinese region is suitable.
• 🔄 Reset: If you've tried to plug the vacuum cleaner in before, reset it. Press the power button for 10 seconds until you hear the beep.

⚠️ Warning: If your router is using WPA3 or WPA2/WPA3 Transition, temporarily switch it to WPA2-PSK. Mijia G1 Does not support new encryption standards.

Next PostNext Connecting the Mijia G1 to the Mi Home

Follow the algorithm in strict order, and if there is a mistake at some point, don't restart the process, but go to the "Problem Solutions" section.

1. Turn on the vacuum cleaner. Press the power button on the case. Wait for the beep and the voice message in Chinese ("" - "Please add the device").
2. Open Mi Home. Press "+" in the upper right corner → "Add device" → select "Vacilities" category.
3. Select a model. In the list, find the Xiaomi Mijia G1 (may appear as "Mi Robot Vacuum G1"). If there is no model, update the app or change the region to China.
4. Confirm the flashing of the indicator. The app will ask you to press and hold the buttons on the vacuum cleaner. Press the power button and the home button for 3 seconds, until the indicator flashes quickly blue.
5. Connect to the vacuum cleaner network. In your phone's Wi-Fi settings, find a network called mirobot-XXXX (where XXXX is unique code). Connect to it. No password required.
6. Return to Mi Home.The app will automatically detect the vacuum cleaner.Select your 2.4GHz home network and enter the password.Wait until the process is complete (may take up to 5 minutes).
7. Update the firmware. Once connected, the app will prompt you to update the software. Don't refuse, without the current firmware, some functions (such as zoning) will not work.

Configuring after the connection: what to do first

Successful pairing is only half the battle, so to make the vacuum cleaner work efficiently, do the basic setup:

• 🗺️ Map of the premises: start the first cleaning in "Full cleaning" mode. The vacuum cleaner will create a map that can then be edited (add zones, virtual walls).
• ⏰ Schedule: Go to Settings → Schedule and set up automatic cleaning. The optimal time is when you are not at home (for example, from 10:00 to 12:00).
• 🔊 Voice prompts: in Settings → Voice select language (Chinese and English available). No Russian, but you can turn off your voice completely.
• 🔄 Map Update: If the vacuum cleaner "loses" furniture or walls, update the map manually through Settings → Map. → Update.

⚠️ Warning: If after updating the firmware vacuum cleaner stopped responding to commands, reset through Settings → General. → Reset. It'll delete the cards, but it'll restore the functionality.

Solving Connection Errors: 7 Common Problems

Even with the correct following of the instructions, there can be failures. Let's look at the typical errors and how to fix them.

1 Mi Home doesn't find vacuum cleaner

Reasons:

• The vacuum cleaner is not switched to pairing mode (the indicator does not flash blue).
• The phone is not connected to the mirobot-XXXX network.
• The app version is outdated.

Solution: restart the vacuum cleaner (press the power button for 10 seconds), update the Mi Home and try again.

2. "I failed to connect to the network" error

Reasons:

• The router uses WPA3 or double bandwidth (2.4/5 GHz).
• The network name (SSID) contains Cyrillic or spaces.
• Too weak Wi-Fi signal (vacuum cleaner should be next to the router).

Solution: Turn the router to only 2.4 GHz mode, rename the network to Latin and reconnect.

3. Hanging in the phase of firmware update

If the update process lasts more than 20 minutes:

1. Reboot the vacuum cleaner (hold the power button for 10 seconds).
2. Connect directly to it via mirobot-XXXX.
3. In your phone browser, open the address http://192.168.4.1 and manually download the firmware from the official website.

Alternative ways to manage: without Mi Home

If you cannot connect to Mi Home (for example, due to regional restrictions), use alternative methods:

• 🤖 Voice assistants: Mijia G1 Compatible with Alice (via Xiaomi Smart Home) and Google Assistant: "Alice, turn on the vacuum cleaner" or "OK Google, start cleaning up".
• 📱 Third-party applications: Home Assistant or IoT Mi Controller (requires manual configuration via token).
• 🖥️ Management from PC: through the web interface http://[IP-address of the vacuum cleaner (you need to know the local IP network).

To connect via Home Assistant, add configuration.yaml to the configuration:

vacuum:


- platform: xiaomi_miio




host: [IP- vacuum cleaner address]




token: [your token]

The token can be obtained through the Mi Home Token Extractor app (available on GitHub).

💡

If the vacuum cleaner is not connected to the Mi Home because of the region, create a second account in the app with the region of China and use it only to manage the Mijia G1.

Frequent questions after connection

💡

If the vacuum cleaner doesn't connect the first time, 90% of the problems are with router settings. check the 2.4GHz mode, the type of WPA2 encryption, and the lack of special characters in the network name.