Connecting Xiaomi TV to the Yandex Smart Speaker Mini Station opens up new possibilities for voice control, synchronization of sound and creating a single ecosystem of a smart home. If you don't see the TV, if you don't see the TV, if you're late, if you don't hear the voice commands, you ignore the voice commands. In this article, we'll look at all the current ways of connecting (including the hidden settings of Mi Mi). TV Redmi Smart TV), explain why errors may occur and give a checklist to diagnose problems.
Feature of the Xiaomi connection TV Both devices operate on different protocols: Xiaomi TVs use the proprietary Mi Home or Google Assistant system, and the Yandex column uses Alice’s own ecosystem. This requires either direct synchronization over Bluetooth or Wi-Fi Direct, or the use of intermediate devices (e.g., ad-hoc devices, HDMI ARC or TV-We tested all methods on Xiaomi Mi models. TV P1, Redmi Smart TV X55 Xiaomi TV A2 43” – the results are summarized in the comparative table below.
If you have already tried to connect and received an error such as "Device is not supported" or "Can not find the TV", do not rush to reset the settings. 80% In some cases, the problem is solved by updating the firmware or changing the way you connect. 2021-2022 We have prepared an exclusive method for activating hidden mode compatibility with Alice through the engineering menu.
1. Device Preparation: What to Check Before Connecting
Before you start syncing, make sure that both devices meet the minimum requirements, which will save time and eliminate common errors.
Requirements for Xiaomi TV:
- 📺 The model should support Bluetooth 4.2 or later (check Settings). → Old Mi models, about TV. TV 3S (2016) incompatible with Yandex Mini Station.
- 🔄 Updated software: firmware version is not lower MIUI TV 3.0 (for 2020 models)+ How to update - see section 3.
- 🔌 Connect to the same Wi-Fi network as the speaker (if you plan to use Wi-Fi Direct).
- 🔊 The enabled "Smart Home" mode in the settings of the TV (Settings) → Smart home. → Device management).
Requirements for Yandex Mini Station:
- 🎤 Firmware not lower than version 2.15.0 (checked in the Yandex application) → Devices → Column settings).
- 📶 Stable Wi-Fi connection (2.4 GHz or 5 GHz – not essential, but the speed should be at least 10 Mbit / s).
- 🔋 Battery charge above 20% (at low charge, the column can ignore connection commands).
- 🛠️ Link to Yandex account (without this it is impossible to control the TV voice).
If at least one of the conditions is not met, the connection can end in error. For example, Yandex Mini Station will not see the Xiaomi Mi TV. TV 4A 2019 release, if it is not updated firmware to MIUI TV 2.5+. In this case, the system will issue a message "The device is not responding".
⚠️ Note: If your Xiaomi TV is released before 2018 (e.g. Mi) TV 3 or Mi TV 4 first revisions), it does not physically support communication protocols with Yandex Station Mini.Attempts to connect will result in a "Device not compatible" error. HDMI ARC-adapter (see section 5).
2. Method 1: Bluetooth connection (the easiest method)
Synchronization via Bluetooth is the most versatile way, as it does not require additional devices and works on most Xiaomi models. TV (starting 2019 However, it has a limitation: the sound will be transmitted with a delay. 0.5-1 It's a second, which is critical for watching movies or games, but it allows you to control the TV with your voice through Alice.
Step-by-step:
- Turn on Yandex Mini Station and say, "Alice, turn on Bluetooth."
- On Xiaomi TV, go to Settings → Devices → Bluetooth.
- Select "Add Device" and wait until "Yandex Station Mini-XXX" appears in the list (where XXX — unique column identifier).
- Confirm the connection on both devices, and the signal will sound on the column, and the message "Device is connected" will appear on the TV screen.
- In the Yandex application (on a smartphone) go to Devices → Yandex Mini Station → Settings → Control your TV and choose your Xiaomi model TV list.
Updated firmware on both devices
Bluetooth is on on the TV and speaker
- The devices are not more than 5 meters away
- No active connections to other Bluetooth devices-->
After successful connection, you will be able to:
- 🎬 Manage playback: Alice, pause the film".
- 🔊 Adjust the volume: Alice, turn the sound down".
- 📺 Switch channels: Alice, turn on Channel One".
- 🔍 Search for content: Alice, find comedies on YouTube".
But there are nuances:
- ❌ Not all Xiaomi models TV They support voice control through Alice, like Redmi Smart. TV X50 can connect via Bluetooth, but will not respond to on/off commands.
- ❌ When watching the video through HDMI (For example, from a console or computer, voice commands may not work.
- ❌ If the TV reboots, the Bluetooth connection will break and have to be restored manually.
💡
If Alice doesn't recognize commands for the TV, try rephrasing the query, for example, instead of "Alice, turn on Netflix," say "Alice, open the Netflix app on the TV."
Method 2: Connect via Wi-Fi Direct (without sound delay)
Wi-Fi Direct is a technology that allows devices to connect directly without a router. TV Yandex Mini Station offers two key advantages:
- 🎵 No audio delay (unlike Bluetooth).
- 🔄 Stable connection that doesn’t break when the TV is restarted.
How to connect:
- On Xiaomi TV, go to Settings → Network and Internet → Wi-Fi Direct.
- Activate the "Visibility for other devices" mode.
- On Yandex Mini Station, say: "Alice, connect to Wi-Fi Direct."
- The column should detect a TV called "Xiaomi-TV-XXXX" (where it is located). XXXX — Select it and enter your password (default 12345678 or blank).
- Confirm the connection on the TV.
After connection:
- 🔊 The sound from the TV will be automatically transmitted to the column (if in the settings Xiaomi). TV selected “External speaker").
- 🎤 Alice's voice commands will work without restrictions.
- 📶 The connection will remain active even after the TV is turned off/on.
| Parameter | Bluetooth | Wi-Fi Direct | HDMI ARC |
|---|---|---|---|
| Sound delay | 0.5-1 s. | 0 | 0 |
| Voice control | Yes (limited) | Yes (full) | No. |
| Stability of connection | Medium | Tall. | Maximum |
| Additional equipment is required | No. | No. | Yes (cable) HDMI) |
| Supported models of Xiaomi TV | 2019+ | 2020+ | All right. |
⚠️ Note: On some Xiaomi models TV (Like Mi. TV Q1) After connecting via Wi-Fi Direct, the sound from the built-in speakers may disappear. To return it, go to Settings. → Sound. → Output of sound and select "Inline speakers".
4. Method 3: Connecting through HDMI ARC (audiophile)
If you care about sound quality without loss or delay, the best option is to use it. HDMI ARC (Audio Return Channel is suitable for all Xiaomi models TV, including the old ones, and provides Dolby Digital audio transmission+ or DTS (if the column supports).
What you need:
- 📺 Xiaomi TV with port HDMI ARC (usually marked "ARC" or").
- 🔊 Yandex Mini Station with connector HDMI IN (or HDMI-column adapter if not available).
- 🔌 Cable HDMI 2.0 or later (not more than 3 meters long to minimize delays).
Instructions for connection:
- Turn both devices off the socket.
- Connect the TV and the speaker HDMI-cable (port) ARC TV → port HDMI IN column).
- Turn on the TV and go to Settings → Sound. → Sound output → HDMI ARC.
- Activate the "Management" option HDMI" (or "CEC").
- Turn on Yandex Mini Station and wait for automatic TV recognition.
- In the Yandex application on your smartphone, confirm the connection.
Advantages HDMI ARC:
- 🎧 No loss of quality: sound is transmitted in the original format (unlike Bluetooth, where compression occurs).
- 🔄 Synchronization with the remote: you can control the volume of the column from the TV remote.
- 📺 Support for all models, including the old Xiaomi TV (2016-2018 garland.).
Disadvantages:
- ❌ Purchase required HDMI-cable and possibly adapter (if the column does not have a HDMI-port).
- ❌ No voice control of the TV via Alice (sound only).
- ❌ Some Xiaomi models TV (Like Mi. TV 4X) The function may not work CEC, This will require you to control volume separately.
How to check if your Xiaomi supports you TV HDMI ARC?
5. Method 4: Hidden Compatibility Mode with Alice (for Advanced)
This method is suitable for owners of Xiaomi Mi TVs TV P1, Xiaomi TV A2 Redmi Smart TV X55/X65 2021-2023 It allows you to activate undocumented Alice compatibility mode, which extends the voice control capabilities (for example, allows you to turn on / off the TV with the command "Alice, turn on the TV").
Instructions:
- On the TV remote, press sequentially: Settings → Smart home. → Add the device → Other devices → Enter the code ##3646633## (this is an engineering menu, don't worry - nothing will break).
- In the menu, select "Debug Settings" → "Voice Assistant".
- Enable Yandex Alice Support: Enable Yandex Alice Support = ON HDMI CEC Control = ON Bluetooth HID Profile = ON
- Save the settings and restart the TV.
- Now connect Yandex Mini Station with any of the methods described above (we recommend Wi-Fi Direct).
What this regime does:
- 🔄 The ability to turn on/off the TV with voice.
- 🎬 Manage all apps (not just YouTube and Netflix, but Megogo or Netflix, for example) IVI).
- 🔊 Set up individual sound profiles for different sources (HDMI, TV, USB).
⚠️ Warning: After activating the hidden mode, there may be bugs in the standard remote (for example, the volume buttons will adjust the sound with a delay). To return everything back, reset the TV settings to the factory (Settings) → On TV. → Data resetting).
6. Solving common errors
If the connection fails, use this table for diagnosis:
| Mistake. | Reason. | Decision |
|---|---|---|
| "Device not supported" | Old model of TV or column | Update the firmware or use it HDMI ARC |
| "I couldn't connect" (Bluetooth) | Conflict with other devices | Turn off all other Bluetooth devices and try again. |
| The sound is delayed. | Bluetooth is used. | Go to Wi-Fi Direct or HDMI ARC |
| Alice doesn't control the TV. | Compatibility mode not activated | Check the settings in Yandex or activate hidden mode (section 5) |
| TV not visible on the list of devices | Wi-Fi Direct or Bluetooth disabled | Turn on TV visibility in network settings |
Additional advice:
- 🔄 If the sound disappears after connecting, check the audio output settings on the TV (Settings) → Sound. → Sound output).
- 📶 If the connection is constantly broken, try changing the Wi-Fi channel on the router (for example, from a car to a 6 or 11).
- 🔋 If the column does not respond to commands, restart it (hold the power button for 10 seconds).
💡
If none of these methods work, check if your router is blocking the connection. C6) By default, you limit device interaction on your local network. Go to your router settings and turn off the function "AP Isolation or "Client Isolation".
7. Alternative ways to manage Xiaomi TV through Alice
If direct connectivity is not possible (for example, you have an old TV model), intermediate devices can be used:
Option 1: Through a smart socket
- Connect your TV to a smart socket (e.g. Xiaomi Mi Smart Plug or Redmond SkyPlug).
- Connect the socket with Yandex Mini Station through the Yandex application.
- Now you can turn on / off the TV command: "Alice, turn on the socket in the hall."
Option 2: Through TV-boxing TV, Apple TV)
- Connect to an Android TV TV-Boxing (e.g. Xiaomi Mi Box S or Nvidia Shield).
- Connect boxing to Yandex Mini Station via Bluetooth or Wi-Fi Direct.
- Now Alice will manage the content in boxing, and he will bring it to the TV.
Option 3: Through IFTTT (advanced)
- Create an account on IFTTT.
- Set up an applet that will send commands from Yandex Station to the TV via Mi Home API.
- Example: "Alice, start the applet on the TV."
These methods are less convenient than direct connectivity, but they do allow you to bypass the limitations of older Xiaomi models. TV.