How to connect a robot vacuum cleaner Xiaomi G1 Phone: step-by-step guide with photos and tips

Xiaomi Mi Robot Vacuum-Mop G1 (Or just Xiaomi. G1) — One of the most popular cleaning automation solutions in 2026, and its key advantage is the integration with the Mi Home ecosystem, which allows you to control your device from your smartphone, but many users face difficulties when connecting first: If the app doesn't see the vacuum cleaner, if you have sync errors, if you need to reset, in this article, we're going to look at all the steps of the connection, from preparation to solving typical problems, taking into account the latest firmware and Mi Home updates.

If you just unpacked Xiaomi G1 Or you decide to reconfigure it after you reset, and this guide will help you avoid common mistakes. We're not going to just go through the basic steps of the official manual, but we're going to look at the hidden settings, the nuances of working with different versions. Android/iOS And even alternative ways of connecting, like Mi Home Lite for restricted areas, start with preparation, and without it, even the most detailed guide will not help.

⚠️ Important: If your Xiaomi G1 You have already connected to another Mi Account, you need to reset it to factory settings before re-syncing, otherwise you will not be able to reconnect without the previous owner’s data.

1.Preparation for connection: what to check before starting

Before you start synchronizing, make sure that all the components of the system are ready to work, and neglecting this step is the main cause of errors such as "Device not found" or "Disconnected".

First, check the compatibility of your smartphone. The Mi Home app officially supports:

• 📱 Android 6.0 and newer (recommended 8.0)+)
• 🍎 iOS 12.0 and newer (for iPhone) 6s older)
• 🚫 Devices with root access or custom firmware (e.g. LineageOS) are not supported)

Second, prepare the vacuum cleaner itself:

• 🔋 Charge Xiaomi G1 Up to 50% (the indicator on the body must be green or yellow).
• 📡 Make sure the vacuum cleaner is 2 meters away from the router – a weak Wi-Fi signal can interrupt the connection.
• 🔄 If the vacuum cleaner has already been in use, reset the settings (press the power button for 10 seconds).

Also, pay attention to the region of the Mi Account. G1 In China, and your account is linked to Russia, you may have server problems, which will require you to change the region in the Mi Home settings (this is discussed in the error section).

⚠️ Note: If your router uses dual authentication (e.g. login via a router) SMS Or a captcha, temporarily turn it off. - Xiaomi G1 It does not support such networks.

2. Installation and configuration of the Mi Home app

The official Mi Home app is the only way to connect Xiaomi G1 to the phone (except for alternative firmware, which we will talk about later:

After installation, follow the following steps:

1. Open Mi Home and select a region (e.g., “Russia” or “Mainland China” – this is important for compatibility!).
2. Sign in via Mi Account (if you do not have an account, register by email or phone number).
3. Press «+» → «Add the device» → «Vacuum cleaners» → «Mi Robot Vacuum-Mop G1».

⚠️ Note: If there is no model in the list of devices G1, Update the app or try changing region to Mainland China (the Chinese version often contains more devices).

Download the latest version of the application|Sign in to Mi Account|Choose the Right Region|Update the phone firmware (if required)|Shut down. VPN (It can block Xiaomi servers)-->

If you already have other Xiaomi devices (such as light bulbs or sensors), the app may suggest adding a vacuum cleaner to an existing "room." Select "Living Room" or create a new zone - this will help the later to set up cleaning areas.

3. Step-by-step instruction: how to connect Xiaomi G1 phone-in

Now, to the synchronization process itself, follow the instructions in strict order, and skipping the steps can lead to errors.

Step 1: Activate the connection mode on the vacuum cleaner

• 🔄 Make sure the vacuum cleaner is on (the power button is lit white).
• 🎵 Press the power buttons» + «Home for 3 seconds until you hear a voice message, “Wi-Fi Connection” (English or Chinese).
• 🔊 If there is no sound, check the volume on the vacuum cleaner (in the settings through the “Settings” button on the case).

Step 2: Connect to a Wi-Fi network

• 📶 In the Mi Home app, select your Wi-Fi network from the list.
• 🔐 Enter your password (registration is important!) If the network is hidden, click Other Networks and specify SSID manually.
• ⚠️ Do not connect the vacuum cleaner to the guest network or Wi-Fi with portal authorization (as in hotels).

Step 3: Sync with your account

• 🔄 Wait until the indicator on the vacuum cleaner flashes orange (this means that it is trying to connect).
• 📱 The phone will be asked to confirm the connection – click “Confirm».
• ✅ After 10–30 seconds, the vacuum cleaner will make a sound and light up in blue – the connection is successful!

If there is an error at any point, go to the section “Prevalent Errors and Solving Them” for example, “Error 1002” means a problem with Xiaomi servers, and “Error 2001” means an incorrect Wi-Fi password.

💡

The rule is that the vacuum cleaner and phone must be connected to the same Wi-Fi network. If you have a dual-band router (2.4 GHz) + 5 GHz), select 2.4 GHz network – Xiaomi G1 It does not support 5 GHz.

4. Xiaomi setup G1 plug-in

Once synchronized successfully, the vacuum control panel will open, and you can configure:

• 🗺️ Map of the premises (automatic scanning or manual marking of areas).
• 🕒 Cleaning schedule (daily, day-by-day, one-time).
• 🔋 Modes of operation: quiet, balanced, turbo, maximum.
• 🚫 No-go zones (such as around carpets or children's toys).

⚠️ Attention: The first cleaning can take up to 1.5-2 hours, the vacuum cleaner will map the room.

Optimization tips:

• 📍 For an accurate map, remove small items (wires, shoes, toys) from the floor).
• 🔄 If the vacuum cleaner is “lost”, update the firmware through Settings → Update of the PO.
• 🔋 In the base station settings, enable “Auto Charging” so that the vacuum cleaner returns to the dock at a low charge.

💡

If you have a large house (over 100 m2), break it up into several zones in the app, which will speed up cleaning and save battery life.

For advanced users, hidden settings are available:

1. Go to Settings → Additional → Developer settings.
2. Activate Debugging Mode, which will allow you to use third-party apps like Valetudo for alternative management.
3. Set up Sensor Sensitivity (useful if the vacuum cleaner frequently collides with furniture).

5. Common mistakes and their solution

Even with the exact following of the instructions, there can be problems. We have collected the TOP-5 errors and ways to fix them:

If the error is not listed in the table, try:

• 🔄 Restart the vacuum cleaner (press the power button for 5 seconds).
• 📱 Reinstall the Mi Home app.
• 🌐 Change. DNS on a router (for example, on 8.8.8.8 from Google).

Critical information: If the vacuum cleaner produces an error "Error 1203", this means that its firmware is outdated and incompatible with the current version of the Mi Home, in which case you need to update the software through Mi Home or manually (instructions in the next section).

6. Alternative ways of connecting

If the standard method doesn't work, try alternatives. They're useful if:

• 🌍 Your region is blocked in Mi Home.
• 🔒 You do not want to use official Xiaomi software.
• 🛠️ You need advanced features (e.g., Home Assistant integration).

Method 1: Mi Home Lite app

Lightweight version of Mi Home for restricted areas. APK From Uptodown and follow the standard instructions. minus - fewer functions (for example, no cleaning schedule).

Method 2: Valetudo (for advanced users)

Open source software for robot vacuum cleaners requires:

1. Valetudo installations RE vacuum-drive SSH.
2. Local network settings (vacuum cleaner must have static) IP).

⚠️ Warning: Unofficial firmware can deprive warranties and cause unstable work.

Method 3: Connecting with Home Assistant

If you have a smart home on Home Assistant, add Xiaomi G1 Xiaomi Miio integration:

1. Install the Miio Integration expansion.
2. Get the device token through this script.
3. Add the vacuum cleaner to configuration.yaml:

vacuum:


- platform: xiaomi_miio




host: 192.168.1.100 # IP vacuum cleaner




token: YOUR_TOKEN_HERE

7.Reset Xiaomi G1 factory-wise

If the vacuum cleaner has previously been connected to another account or is unstable, perform a full reset.

1. 🔄 Turn off the vacuum cleaner (press the power button for 3 seconds).
2. 🔧 Press the power buttons» + «Spot Clean for 10 seconds until you hear the reset sound.
3. 🔄 The indicator flashes red - release the buttons.
4. 📱 After restarting, the vacuum cleaner will be ready for a new connection.

⚠️ Attention: Resetting removes:

• 🗺️ Stored map of the premises.
• 🕒 Scheduling settings.
• 🔧 All user settings (e.g. cleaning areas).

If the reset didn’t help (for example, the vacuum cleaner still doesn’t connect), check:

• 🔌 Does it come from the net (the indicator should burn).
• 📡 Wi-Fi (Vool cleaner does not support mobile Internet!).
• 🔄 Does the antivirus on the phone block access to the network for Mi Home.

8. Frequently Asked Questions (FAQ)