How to connect to Xiaomi TV via Wi-Fi with iPhone: all working ways

You want to stream your iPhone video to a big Xiaomi TV, but you don't know how to do it wirelessly? Wi-Fi is the most convenient way to mirror your screen or watch media on TV. In this article, we'll look at all the current methods, from standard AirPlay to alternative protocols like Miracast and DLNA, and also explain how to solve typical connection problems.

It is important to understand that not all Xiaomi TVs support live streaming from the iPhone out of the box. It depends on the TV model, firmware version and protocol used. For example, the new Xiaomi TV A Pro or Mi TV Q2 are equipped with built-in AirPlay support, and older models may require additional software or external devices. We will look at options for all cases, from the simplest to the most advanced.

1. Checking the compatibility of the Xiaomi TV with the iPhone

Before you try to connect, make sure your Xiaomi TV supports the right broadcast protocol.

• 📺 Models with AirPlay support: Xiaomi TV A Pro (2022–2026), Mi TV Q2/Q1E, Redmi Smart TV X Pro. These TVs have a built-in module to work with Apple devices.
• 🔄 Models with Miracast/DLNA: Xiaomi Mi TV 4S/4A (2018–2021), Redmi TV. Requires third-party apps on iPhone.
• ⚠️ Old models (up to) 2018 of the year: Mi TV 3/3S — Often do not support wireless broadcasting without external adapters (for example, Google Chromecast or Apple). TV).

To determine the capabilities of your TV:

1. Open the Settings remote. → On TV.
2. Check the section Network Services or Wireless projection.
3. If you have AirPlay, Miracast or DLNA, your TV is ready to connect.

⚠️ Note: On Xiaomi TVs with firmware below MIUI TV 3.0 (released before 2020) may not support modern protocols. → Updating the system.

2. Connect via AirPlay (for compatible models)

AirPlay is the most reliable way to stream from iPhone to Xiaomi TV, if your model supports it. The protocol was developed by Apple, so it is optimized for iOS devices and provides minimal delays when transmitting video or sound.

Instructions for connection:

Make sure your iPhone and TV are connected to the same Wi-Fi network

Update the TV firmware to the latest version

Turn on AirPlay in Xiaomi TV settings

Unlock your iPhone (the screen must be active)

-->

1. Activate AirPlay on your TV: Go to Settings → Connection and sharing → Apple AirPlay. Turn on the switch and set the device name (e.g. Xiaomi) TV Living room, if necessary, ask PIN-Protection code (recommended for public networks).
2. Start streaming from iPhone: Open Control Point (swipe down from the top right corner on iPhone X and later). Click Screen Duplication (or Screen Mirroring). Select your Xiaomi TV from the list of devices. When you request, type in PIN-TV-screen.

If the broadcast does not start:

• 🔌 Restart your router – sometimes a problem in network settings.
• 📱 Reset AirPlay on iPhone: Turn off and turn on Wi-Fi again.
• 📺 On the TV, check whether the broadcast is blocked by the Energy Saving mode (turn it off in the settings).

💡

If the video is slowing down when streaming via AirPlay, try lowering the resolution on your iPhone: go to Settings → Screen and Brightness → Screen Resolution and select Standard instead of Maximum.

3. Alternative methods: Miracast and DLNA

If your Xiaomi TV doesn’t support AirPlay, you can use the universal Miracast (for screen mirroring) or DLNA (for media transfer) protocols.

Comparison of protocols:

Connection via Miracast

For screen mirroring:

1. Install Screen Mirroring or ApowerMirror on your iPhone.
2. On your TV, turn on Miracast through Settings → Connection and Sharing → Wireless projection.
3. In the iPhone app, select your Xiaomi TV from the device list.
4. Confirm the connection on the TV (may be required) PIN-code).

⚠️ Note: When using Miracast on iPhone, the absence of sound is a limitation of the protocol. DLNA.

Media Transfers via DLNA

If you only need to stream video or music (without screen duplication):

1. Install the VLC or LocalCast app on your iPhone.
2. Open the file in the application and select the option to Play on another device.
3. The list of devices will appear your Xiaomi TV (if it's on DLNA-server).
4. Start playing – the content will be broadcast to the TV.

4. Solving Connection Problems

If the Xiaomi TV doesn’t see the iPhone or the broadcast stops, check out the following points:

• 🌐 One Wi-Fi network: Devices must be connected to the same router. If you use 5 GHz and 2.4 GHz simultaneously, turn off one of the networks.
• 🔒 Router firewall: Some routers block multicast traffic (needed for multicast traffic) Miracast/DLNA). Turn it off. AP Isolation in router settings.
• 📱 Power Saving Mode: Turn off Low Consumption Mode on iPhone (Settings) → Battery, otherwise the broadcast may be interrupted.
• 📺 TV firmware: On Xiaomi models until 2020, update the software to MIUI TV 3.0+, Otherwise, AirPlay will not work.

Common mistakes and ways to eliminate them:

💡

If neither method works, check to see if the antivirus or VPN on your iPhone is blocking the streaming. Turn them off temporarily and try to connect again.

5. Use of external devices (if nothing helps)

If your Xiaomi TV doesn’t support wireless broadcasting, you can use external adapters:

• 📦 Apple TV: Connects to TV through HDMI It supports AirPlay without delay, perfect for the owners of the Apple ecosystem.
• 📺 Google Chromecast: Works through Google Home and supports streaming from apps (YouTube, Netflix.
• 🔌 Mi TV Stick: Adapter from Xiaomi with support for Miracast and DLNA. Cheaper than Apple. TV, but it can slow down when broadcasting 4K.

How to connect Apple TV to Xiaomi TV:

1. Connect the Apple TV to the HDMI port on your TV.
2. Select the appropriate signal source on the Xiaomi remote.
3. On iPhone, swipe down to call Control Point and select Screen Duplicate.
4. Apple TV will appear in the list – click on it to start broadcasting.

⚠️ Note: When using Google Chromecast or Mi TV Stick to mirror the iPhone screen may require additional software (such as ApowerMirror), as these devices are originally focused on Android.

6. Streaming Optimization: How to Reduce Lags and Lags

Even if the connection is installed, there may be problems with ping, sound breaks or video brakes.

• 📶 Use the 5GHz band: It's less congested and provides more bandwidth.Switch to router settings.
• 🔌 Connect TV to cable: If router supports Ethernet, connect TV to it via cable – this will reduce the load on Wi-Fi.
• 🎮 Reduce resolution: In the broadcast settings (e.g., in ApowerMirror) select 720p instead 1080p, if there are lags.
• 🔄 Turn off background tasks: Close all apps on your iPhone except the one you use to stream.

Router settings for stable broadcasting:

• Enable QoS (Quality of Service) and prioritize your Apple devices.
• Disable Band Steering (if the router automatically switches devices between 2.4 GHz and 5 GHz).
• Set a 5GHz fixed channel (such as 36 or 149) instead of automatically selecting.

7.Security: How to protect the broadcast from outsiders

When using AirPlay or Miracast, your Xiaomi TV may be available for connection to other devices on the same network to avoid unauthorized access:

• 🔐 Install. PIN-Code: In AirPlay or Miracast settings on TV, enable a password request every time you connect.
• 🌍 Create a guest network: Set up a separate network on your router for broadcasting with limited access to other devices.
• 📵 Turn off the broadcast when simple: In the settings Xiaomi TV Set an AirPlay automatic shutdown timer after 5-10 minutes of inactivity.

If you connect in a public place (such as a hotel or office):

• Use a VPN on your iPhone to encrypt traffic.
• Turn off the broadcast immediately after use to avoid connecting other users.

Frequently asked questions