How to distribute Wi-Fi with Xiaomi Redmi: all ways and solutions to problems

Xiaomi Redmi smartphones have long become universal devices that can replace not only the phone, but also the router. The ability to distribute mobile Internet through a Wi-Fi hotspot helps when traveling, in the country or when the main Internet suddenly turned off. However, not all users know how to configure this feature correctly – especially if we are talking about the new models of Redmi Note 12, Redmi. 10C or flagships of the K series.

In this article, we will analyze all the current ways to distribute the Internet with Xiaomi Redmi – from the classic modem modem to hidden functions like USB-We will focus on common errors (for example, when devices are not connected to the network or the Internet is running in a jerky manner) and give unique recommendations for optimizing the speed and stability of the connection, which are not found in the standard instructions.

1. Classic method: Wi-Fi hotspot

The most common way to distribute the Internet is to convert a smartphone into a portable router. On Xiaomi Redmi, this feature is called Modem Modem or Access Point. Let's take a step-by-step setup with this example. MIUI 14 (relevant to most models 2022-2026).

First, make sure that on the phone:

• 📶 Mobile Internet enabled (Icon) 4G/5G status-line).
• 🔋 Battery charge not lower than 30% – at a low level, the system can automatically disable the access point.
• 🔒 No active VPN Proxies – they can block the transmission of data.

Now we move on to the setting:

1. Open Settings → Connections and Sharing → Modem Modem.
2. Slip on the Wi-Fi Access Point.
3. Activate the slider at the top of the screen.
4. Click Access Point Settings to Change: 🔑 Name of the network (SSID) — for example, Redmi_Hotspot_5G. 🔒 Type of security - choose WPA3-Personal (most protected). 🔐 Password minimum 8 symbols, with numbers and letters.

Save the changes and connect other devices to the network you have created.

Mobile Internet is on and running stably

There is enough charge on the phone (better). >50%)

Disabled. VPN and energy-saving regime

Password for the access point is recorded or stored in notes-->

If the access point does not appear in the network list on other devices after activation, check:

• 📱 Is the mode on the plane not on.
• 🔄 Does not block the firewall (for example, Avast or built-in) MIUI Security) data transfer.
• 📡 Does Wi-Fi frequency conflict with other networks (try changing the channel manually in the access point settings).

💡

If connected devices do not receive the Internet, try changing the frequency range from Auto to 2.4 GHz in the settings of the access point – this will solve the problem of compatibility with old laptops or printers.

2. USB-Ternetting: distribution of the Internet by cable

If you need to connect a device without a Wi-Fi module (for example, a landline PC or a Raspberry Pi), use USB-This technique is also useful when you want maximum connection stability -- cable speed and ping are always better than air.

Instructions for Xiaomi Redmi:

1. Connect your smartphone to your computer through the original USB-cable (cheap cables may not support data transmission).
2. On the phone, select the connection mode File transfer (MTP) or USB-Ternetting (will appear in the notification curtain after connecting).
3. If the automatic connection does not work, go to Settings. → Connections and sharing → Modem mode → USB-Ternetting and activate the slider.
4. On PC, check that a new device has appeared in Network Connections (usually called Remote). NDIS).

Possible problems and solutions:

💡

USB-Ternetting consumes significantly less battery power than Wi-Fi access point, so it is ideal for long-term operation from Power Bank.

Windows 11 sometimes requires additional configuration:

⚠️ Note: If after connecting the Internet on the PC does not appear, open the Control Panel → Network and Internet → Network control centre → Change the adapter settings. Find an Ethernet (or Remote) connection. NDIS), Right-click, select Properties → IP version 4 (TCP/IPv4) and check the box on Get IP-address.

3. Bluetooth modem: an alternative to save charge

If you need to share the Internet on one device (like a tablet or another phone) and save battery power, use a Bluetooth modem. This method is less energy-consuming than Wi-Fi, but the connection speed is limited. ~3 Mbps (enough for messengers and email, but not for video).

How to set up:

1. Turn on Bluetooth on both devices.
2. On Xiaomi Redmi, go to Settings → Connections and sharing → Modem mode → Bluetooth modem.
3. Activate the slider and wait until the second gadget finds the smartphone in the list of available devices.
4. Connect to Redmi as a modem (on Android, this is done in Bluetooth settings next to the device name).

Features of the method:

• 🔋 Battery consumption is 20-30% lower than with Wi-Fi distribution.
• 📶 Speed depends on the version of Bluetooth: Bluetooth 5.0 (there is in Redmi Note 11 and later) connection is more stable.
• 🔒 No need to enter a password – the connection is confirmed on both devices.

Bluetooth modem is convenient for:

• 📱 Connecting smartwatches (Mi Band, Amazfit) to the Internet.
• 💻 Sync files between phone and laptop without cable.
• 🎧 Use Redmi as a modem for MacBook (where you sometimes have problems with your Macbook) USB-ternetting).

4. Hidden settings: how to increase the speed of distribution

By default. MIUI It limits the speed of Wi-Fi distribution to save battery life, but if you're connected to a Power Bank or an outlet, you can remove those limits:

Method 1: through the Developer Mode:

1. Activate Developer Mode: Settings → About Phone → MIUI version (shap 7 times).
2. Back to Settings → Additionally. → For developers.
3. Find the item Limit background processes and set without restrictions.
4. Also disable Battery Optimization for the access point (if any).

Method 2: through the Engineering Menu (for advanced users):

##4636##

In the menu that opens, select Wi-Fi Information and change the Wi-Fi setting. TX Power to maximum value (usually 8 or High) Warning: this will increase battery consumption!

Wi-Fi access point|USB-terneting|Bluetooth modem|Not using.-->

A few more life hacks to accelerate:

• 📶 Switch the network to Only 4G (LTE) In Settings → SIM-maps and mobile networks → Network type – this will eliminate switching between 3G/4G, junction-retardant.
• 🔄 Turn off Auto-Update apps on Google Play on connected devices – they can steal traffic.
• 🛡️ If you use Redmi with two SIM-cards, select for distribution the one where the signal is better (in the settings of the access point there is a mobile data item).

5 Problem Solving: Why Wi-Fi Distribution Doesn't Work

Even after setting up the hotspot on Xiaomi Redmi correctly, let’s look at common errors and their solutions that are not described in the official instructions.

Problem 1: Devices connect to the network, but the internet doesn’t work.

• 🔧 Check if the phone is enabled Traffic Saving Mode (Settings) → Connections and sharing → Saving traffic).
• 📡 Restart your phone – sometimes the modem module freezes".
• 🔄 Reset the settings. APN: Settings → SIM-maps and mobile networks → Access points (APN) → Reset to factory.

Problem 2: The access point is permanently shut down.

⚠️ Note: Some Redmi models (e.g. Redmi) 9A) The access point shuts down after 5-10 minutes due to energy saving. To fix this, add the application Settings in battery optimization exceptions: Settings → Battery → Optimizing the battery → All applications → Settings → No restrictions.

Problem 3: Low speed or frequent breaks.

If nothing helps, try resetting your network settings:

1. Settings → System → Resetting → Resetting Wi-Fi, mobile network and Bluetooth settings.
2. After resetting, restart the phone and set up the access point again.

6. Wi-Fi distribution without mobile Internet (via Ethernet)

Few people know, but Xiaomi Redmi can be turned into a full-fledged router if you connect it to a wired Internet through the Internet. USB-This is true, for example, in hotels where Wi-Fi is paid and Ethernet cable is free.

This will require:

• 📱 Xiaomi Redmi smartphone with support USB OTG (Most models after 2019).
• 🔌 USB-Ethernet adapter (e.g., USB-Ethernet adapter, UGREEN USB 3.0 to Ethernet).
• 🖥️ Laptop or PC for initial settings (optional).

Instructions:

1. Connect the Ethernet adapter to your phone OTG-cable.
2. Insert the network cable into the adapter.
3. On the phone, activate it. USB-Ternetting (as in Section 2).
4. Redmi will now distribute internet from a wired network via Wi-Fi or USB.

This method works for all Redmis with MIUI 12 and newer, but may require manual indication IP-addresses, if DHCP It doesn't work automatically.

7.Security: How to Protect Your Access Point

Open access point on your smartphone is a good target for hackers or neighbors who want to profit from your traffic.

Basic protection measures:

• 🔐 Always use. WPA3-Personal (or at least WPA2-PSK) instead of an open network.
• 🔄 Change the password of the hotspot every 1-2 months (especially if you connect in public places).
• 📱 Turn off the access point when it is not needed – this will save charge and reduce the risk of hacking.

Advanced settings (for MIUI 13/14):

1. Limit the number of connected devices: set a maximum of 3-5 devices in the access point settings.
2. Turn on the filter. MAC-Addresses (if any) and add only your gadgets to the whitelist.
3. Turn it off. WPS — This protocol is vulnerable to brute force attacks.

If you often hand out Wi-Fi at cafes or airports, install a NetGuard or GlassWire app to monitor connected devices and traffic, and these programs will show if a third-party gadget has connected to your network.

💡

Never use simple passwords like this. 12345678 or qwertyui -- they're hacked in seconds with special software: 12+ symbols with a mixture of letters, numbers and characters (for example, Redmi)@2026_Hotspot!).

FAQ: Answers to Frequent Questions