How to give Wi-Fi from a Xiaomi phone: full instructions for all models

Modern Xiaomi smartphones (including the Redmi and POCO lines) allow you to distribute mobile Internet to other devices through the hotspot technology (Wi-Fi Hotspot), which is indispensable when you don’t have a router at hand and you need access to the network for a laptop, tablet or other phone, but many users face problems: access point is not turned on, devices are not connected, or the Internet is too slow.

In this article, we’ll take a look at all the ways Xiaomi phones distribute Wi-Fi, from basic setup to common bug fixes. You’ll learn how to optimize data speeds, save battery life, and even customize USB or Bluetooth handsets. Instructions are relevant for all MIUI 12/13/14 and HyperOS models, including the latest Xiaomi 14 flagships and the budget Redmi Note 13.

1.Preparing the phone for the distribution of Wi-Fi

Before you turn on the hotspot, make sure your Xiaomi is ready for the task.

• 📶 Mobile Internet: Make sure that the phone has activated data transfer (icon) 4G/5G Without a connection to the network, you can't distribute the Internet.
• 🔋 Battery Charging: Wi-Fi distribution actively consumes energy. Charge your phone to at least 30%, otherwise the system may automatically disable the access point.
• 📱 Software Updates: Check the relevance of firmware in Settings → The phone. → Update the system, in older versions. MIUI There are some bugs with Hotspot.

Pay special attention to your carrier's plan. Some mobile rates block the distribution of the Internet or limit the speed when using the access point. For example, MTS and Beeline have separate options for Hotspot - check the terms with your provider.

💡

If you give out the internet frequently, turn off automatic app updates in Google Play and background sync, which will save traffic and extend battery life.

2. How to enable access point on Xiaomi: step-by-step instructions

The process of activating Hotspot on all Xiaomi smartphones is almost the same, but may vary slightly depending on the version of the shell.

1. Open Settings (the gear icon on the main screen).
2. Go to Network and Internet (or Connections and Sharing in MIUI 14+).
3. Select the access point and modem (in some firmware - modem modem).
4. Activate the Wi-Fi Access Point slider.

Once enabled, the system will automatically generate a network name (SSID) and password, which can be changed by clicking on Setting up the access point.

• 🔐 Set a password at least 8 characters long with numbers and letters.
• 📡 Select the 5GHz band (if supported by the device) for a more stable signal.
• ⚡ Disable Automatic Shutdown if you want Hotspot to work continuously.

Name of the network (SSID) You can see it on the Wi-Fi list.|Password entered correctly|Mobile data is included on the phone|The device is in the range of the signal (up to 10 meters)-->

3. Alternative ways to distribute the Internet with Xiaomi

In addition to the classic Wi-Fi Hotspot, Xiaomi smartphones support two more ways to use the Internet: via USB and Bluetooth.

To activate USB-modem, connect the phone to the computer via cable and in the settings Access Point and modem turn on the option USB-For a Bluetooth modem, pair the devices first, then activate the corresponding switch in the same settings.

4. Common Problems and Their Solutions

Even after setting up the hotspot correctly, the Xiaomi hotspot may not work as well, and here are some common mistakes and ways to fix them:

⚠️ Note: If, after connecting to Hotspot, the device receives IP-address, but the internet is not working, check your settings APN. Some operators (e.g. Tele2) require manual access settings.

• 🚫 Access Point not turned on: Restart your phone. If it doesn't work, reset your network settings to Settings → System system → Resetting settings → Resetting Wi-Fi, Mobile Network and Bluetooth.
• 🐢 Slow Internet: Turn off background sync and application updates. In the access point settings, select the 5GHz band (if supported).
• 🔌 Devices do not connect: Check if the limit on the number of connected gadgets is exceeded (usually 8-10). Remove old devices from the list of connected devices.

If the problem persists, try to turn on flight mode for 30 seconds, then turn it off and activate the access point again, which resets the network settings without losing data.

5 How to Save Battery Charges When Distributing Wi-Fi

Hotspot can drain Xiaomi in 2-3 hours if you don’t optimize your settings. Here are proven ways to extend your autonomy:

• 🔋 Connect charging: If you give away the Internet for a long time, use a power adapter. Modern Xiaomi smartphones support fast charging even while Hotspot is running.
• 📉 Limit speed: In the access point settings (More) select Traffic Saving mode. This will reduce speed, but reduce the load on the processor.
• ❄️ Turn off background processes: Close unused apps through Recent and turn off autosynchronization in Settings → Accounts and synchronization.

Another effective way to do this is to reduce the power of the Wi-Fi signal.

1. Enable Developer Mode (click 7 times on the MIUI version in Settings → About Phone).
2. Go to Settings → Additional → For developers.
3. Find Max. the number of connected Wi-Fi clients and set the value of 2-3 (instead of the standard 8-10).

💡

Use of the USB-Modem instead of Wi-Fi Hotspot reduces battery consumption 40-50%, since the power comes from a connected device (laptop or PC).

6.Security in the distribution of Wi-Fi from the phone

An open hotspot on your Xiaomi could be a target for hackers, and follow these rules to protect your data:

• 🔒 Complicated Password: Use a combination of 12+ symbols with capital letters, numbers and special characters (for example, Xiaomi)@Hotspot2026!).
• 🔄 Regular change of password: Change the access key once in a while 1-2 Weeks if you often give out internet in public.
• 🚫 Blacklist: In Hotspot settings, block unknown gadgets.

For additional protection, activate VPN on a phone (e.g. Cloudflare) WARP It encrypts all traffic that goes through the hotspot and hides your activity from the ISP. VPN slow down the speed of 10-30%.

⚠️ Warning: Never give out the Internet over Hotspot if you are connected to public Wi-Fi (such as at a cafe or airport), which creates a double risk: your traffic can be intercepted and your access point will be connected to attackers.

7. Specifics of settings on different Xiaomi models

While the overall Hotspot inclusion algorithm is the same for all Xiaomi smartphones, some models have unique features.

Older models (e.g. Redmi 9A or POCO M3) may not support 5GHz.

1. Select the 2.4 GHz range in Hotspot settings.
2. Set the channel manually (e.g. 6 or 11) to avoid interference from other networks.
3. Place your phone closer to the connected devices (within 5 meters).

FAQ: Frequent questions about giving away Wi-Fi with Xiaomi