How to increase the volume on the Xiaomi smartphone: all the ways from standard to hidden

Quiet sound on Xiaomi, Redmi or POCO — One of the most common problems users face is that even at maximum volume, speakers can sound muted, especially in noisy rooms or when listening to music through built-in speakers. EU-Smartphone firmware for Europe) to the hardware features of a particular model.

In this article, we’ll look at all the ways you can turn up the volume, from basic Android settings to hidden menu features and third-party utilities. It’s important to understand that some methods can affect sound quality or even shorten the life of the speakers, so we’ll point out the risks and give you recommendations for safe use. If you’re an owner of a Xiaomi 13T, Redmi Note 12 or older model like the POCO X3 Pro, here you’ll find a solution for your needs.

1. Checking basic volume settings

Before you resort to radical measures, make sure that the problem is not in the standard settings. Often users miss the obvious settings that can be adjusted in a few seconds.

Open the Quick Settings Panel (swipe down from the top edge of the screen) and check:

• 🔊 Multimedia volume slider -- it should be at maximum, and sometimes it resets after you plug in your headphones or upgrade your system.
• 🎵 Do Not Disturb Mode - if it's activated, the sound can automatically mute. → Sound and vibration → Don't disturb.
• 📱 Sound Profile - Some shells MIUI They offer profiles like "On the street", "Home", "In transport". Select "On the street" for maximum volume.

Also, look at Settings → Sound and Vibration → Additional settings and check:

• 🔇 Disabling Adaptive Sound – This feature automatically adjusts volume based on ambient noise, but sometimes it doesn’t work properly.
• 🎛️ equalizer MIUI — Try to turn on the preset "Rock" or "Pop" to increase the high and medium frequencies.

Removal of volume restrictions in EU-firmware

If your smartphone Xiaomi bought in Europe or sewn EU-version MIUI, It's probably got software volume limits because of local regulations. 11/12, Xiaomi 12/13 Lite and others. You can remove the limit in two ways:

Method 1: Through the Engineering Menu (without root)

1. Open the Phone app and enter the combination: ##36446337## (code may differ for some models).
2. Go to Hardware Testing → Audio → LoudSpeaker Mode.
3. Find the Max Vol or Volume settings and increase the values by 5-10 units (do not exceed 160 for the speaker and 85 for headphones, otherwise you risk damaging the equipment).
4. Save the changes and restart the device.

Method 2: Install global firmware (requires unlocking the bootloader)

• 🌍 Download Global. ROM For your model from the official Xiaomi website (section "Download").
• 🔓 Unlock the bootloader via Mi Unlock Tool (instructions on the Xiaomi website).
• 📱 Swipe your device through the Mi Flash Tool in Clean All mode.

⚠️ Attention: Changing the settings in the engineering menu may cause system failure or audio quality to deteriorate.Before making changes, back up your data via Settings → Additionally. → Backup and reset.

3.Use of third-party applications to amplify sound

If the system didn't work, Google Play apps will come to the rescue, and they work in different ways: some enhance sound with an equalizer, others bypass the limitations of Android, and we tested the top-end solutions and selected the most effective ones:

Instructions for setting up ViPER4Android (for advanced users):

1. Install Magisk and the ViPER4Android FX module.
2. Open the app and go to Settings → Driver Status – make sure the driver is active.
3. Turn on Master Limiter and set Max Gain to 3-5 dB.
4. In the Convolver section, download the preset for your smartphone model (see the 4PDA or XDA Developers forums).

💡

Before installing any sound booster, check its rating and reviews.Apps rated below 4.0 often contain ads or malicious code.

4. Equalizer and MIUI sound effects setup

Xiaomi has a built-in equalizer that many users ignore, and the right settings can dramatically improve sound perception without even increasing the volume in decibels. Here's how to set it up:

Go to Settings → Sound and vibration → Equator and:

• 🎶 Select the preset "Custom" (User).
• 🔼 Lift sliders 100 Hz and 300 Hz on 2-3 divisions – this will strengthen the bass.
• 🔽 Reduce 1–3 kHz by 1 division to reduce sharpness.
• 🔸 Increase 10-12 kHz by 1 division for brightness of high frequencies.

Additional effects are also available in this section:

• 🎤 Mi Sound Enhancer – Improves vocals and instruments.
• 🔊 Surround Sound – creates a surround sound effect (useful for movies).
• 🎵 Dynamic Range Compression – Aligns the volume between quiet and loud fragments.

Deactivate "Adaptive sound"|Select Preset Custom"|Increase 100-300Hz for bass|Reduce 1–3 kHz for softness|Enable Mi Sound Enhancer-->

5. Cleaning of speakers and checking of hardware malfunctions

If the sound has become quieter over time, the problem may be that the speakers have become contaminated or mechanically damaged, and dust, hair and debris accumulate in the speaker's grille, muffling the sound, and this is how to clean them safely:

Cleaning instructions:

1. Turn off your smartphone.
2. Take a soft toothbrush (new!) and gently walk around the speaker grille in circular motions.
3. Use a compressed air spray (to clean keyboards) to blow out the dust. Hold the balloon vertically at a distance of 5-10 cm.
4. Check the sound after cleaning. If there's no improvement, the problem could be in the speaker membrane.

Signs of hardware malfunction:

• 🔊 The sound is distorted even at low volume (wheezing, crackling).
• 🎵 One of the speakers (top or bottom) doesn’t work at all.
• 📉 Volume plummeted after falling or getting moisture.

⚠️ Note: If the speaker is wheezing at any volume, do not try to increase the sound software - this can permanently disable it).

6.Alternative methods: from headphones to external speakers

If the built-in speakers don’t work, consider alternative ways to play sound, as is the case for models with weak monodynamics (e.g. Redmi 9A or POCO C31).

Sound amplification options:

• 🎧 Headphones with amplified bass – even budget models like Xiaomi Hybrid Pro sound louder and clearer than speakers.
• 🔊 Portable speakers: Xiaomi Mi Portable Speaker JBL Go connects to Bluetooth and gives you powerful sound.
• 📻 FM-transmitter – if there is a quiet sound in the car, transmit audio from the phone to the tape recorder through the FM-frequency.
• 🔌 USB-C/Type-C Headphone adapter – some models (e.g. Xiaomi) 11T Pro) support audio output through the connector, which improves quality.

Tip for owners of POCO F4 GT and other gaming smartphones: these models have stereo speakers with support for Dolby Atmos. Activate it in Settings → Sound and Vibration → Dolby Atmos and select the profile "Movie" or "Game" for maximum volume.

💡

If you want a loud sound for continuous use (like outdoors), the best solution is to buy an external Bluetooth speaker, which is safer for your smartphone and better sound.

7. Root-methods for power users (at your own risk)

If you're willing to go through radical measures and have root access, you can make changes to the system files that control the sound, which can maximize volume, but can lead to:

• 🚨 Loss of guarantee.
• 🔄 Possible "brick" (breakdown) of the device.
• 🔊 Risk of damage to speakers.

Method 1: Editing mixer_paths.xml

This file contains volume limits for all audio devices.

1. Install a file manager with root support (such as Solid Explorer).

Method 2: Installation of a custom core

Some custom cores (e.g., FrancoKernel or ElementalX) have built-in settings to amplify sound.

• Unlocked bootloader.
• Installed TWRP Recovery.
• Backup of the current core.

⚠️ Warning: Changing system files without a backup can lead to a bootloop.Before any manipulation, create a full backup through the backup. TWRP Or OrangeFox Recovery.

FAQ: Frequent questions about volume on Xiaomi