How to connect a robot vacuum cleaner Xiaomi G1 Mi Home on iPhone: full instructions with solutions to problems

Introduction: Why Xiaomi Connection G1 iPhones can cause problems

Xiaomi Mi Robot Vacuum-Mop G1 (plainly G1) — One of the most popular cleaning assistants, but its initial setup via the iPhone often becomes a headache for users. Unlike Android, where the process usually goes smoothly, Apple device owners face nuances: From no connection notifications to sync errors with Mi Home, the reason lies in the peculiarities of Bluetooth Low Energy (BLE) on iOS and the limitations of the background mode of the application.

This article will not just repeat the standard manual manual manual manual manual, but will review all the connection steps tailored to the specifics of the iPhone, including solutions to typical errors (such as code 10008 or “device can’t be found”). G1 After connecting to avoid problems with the map of the room or control through Siri Shortcuts. If you have already tried to connect the vacuum cleaner and got an error, skip the basic steps and go straight to the section "Problem Solving".

What you need to connect Xiaomi G1 iPhone

Before you start, make sure you have everything you need, and without these components, the process can be delayed or fail.

• 📱 iPhone with iOS version not lower than 14.0 (on older versions Mi Home may not support the iPhone) BLE).
• 🤖 Xiaomi robot vacuum cleaner G1 with a battery charge of at least 30% (at a low charge, the device will not go into pairing mode).
• 📶 Stable 2.4GHz Wi-Fi connection (vacuum cleaner does not work with 5GHz networks or restricted guest networks).
• 🔌 Charging station G1, plugged into the outlet (the robot must be on the base during setup).
• 📲 Mi Home app of the latest version (you can download it in the App Store).

Important: If you have a dual-band router (like Keenetic or TP-Link), temporarily turn off the 5GHz network in the router settings. Many Xiaomi vacuum cleaners "do not see" the network if the name is SSID It's the same for both bands. Also check that the router's settings have turned off the filter. MAC-Addresses – it can block the connection of a new device.

Install Mi Home from the App Store|The charging station is connected to the socket|The robot is on base and charged at 30%+|Wi-Fi operates in the 2.4 GHz band|Disabled. VPN and ad blockers

-->

Step-by-step: connect Xiaomi G1 To Mi Home on iPhone

Follow this algorithm exactly, skipping even a small step (for example, an unpressed button on the vacuum cleaner case) can lead to an error. If something goes wrong at some point, don't start over, go to the "Problem Solving" section.

1. Turn on the robot vacuum cleaner. Press and hold the power button on the body. G1 3-5 seconds until you hear the beep, the indicator on the panel should light up white or blue (if flashing red, the charge is too low).
2. Launch the Mi Home app. Open Mi Home and log in (if you haven't already done so). Choose China (even if you're in Russia) - this is important for the correct operation. G1. Press. + → Addition of a device.
3. Select a category of device. Type in the search bar G1 or find it manually: Vacuum cleaners → Xiaomi Mi Robot Vacuum-Mop G1. Click on the model.
4. Activate the pairing mode on the vacuum cleaner. Press the home button (with the image of the house) and the power button for 5 seconds at the same time until you hear a voice message in Chinese: "" (this means "network setting mode"). The indicator will flash orange.
5. Connect to the vacuum cleaner's temporary network. On your iPhone, go to Settings. → Wi-Fi and find a network called mirobot-XXXX (where) XXXX — Connect to it. Go back to Mi Home, the app should automatically detect the vacuum cleaner.
6. Select your home Wi-Fi network. Mi Home will request network selection. Enter your 2.4GHz Wi-Fi and enter your password. Do not use special characters (for example, do not use special characters, #, $, %) — They can cause a mistake.
7. Wait until you've set up, it'll take 1 to 3 minutes, the vacuum cleaner will give you a long beep, and the app will have a "Connect successfully" notification, and you can now move on to setup.

Critical detail: if in step 5, the iPhone is not connected to the mirobot-XXXX network, try "forgetting" this network in the Wi-Fi settings and try again. Sometimes iOS blocks automatic connection to temporary networks.

💡

If the vacuum cleaner doesn't make any noises when you press the buttons, check if the iPhone has either "Do Not Disturb" or "Focus" modes, which can silence the sounds from the connected devices.

Setup Xiaomi G1 After the connection: what to do first

A successful connection is only half the battle. G1 It worked efficiently, you have to set it up properly:

• 🗺️ Create a map of the room. Run the first cleaning in "Full Cleaning" mode. → The vacuum cleaner will make a map that can then be edited: add zones, virtual walls or forbidden areas.
• 🔄 Update your firmware. Go to your device settings. → Update firmware: Update fixes connection bugs and adds new features (such as carpet recognition).
• 📍 Set up geofences. In Settings. → Geosons tie the vacuum cleaner to your location, which will allow you to automatically start cleaning when you leave the house.
• 🗣️ Activate voice control. In Mi Home, connect the vacuum cleaner to Siri Shortcuts or Alice (if you use Yandex.Station). Teams like "Alice, run the vacuum cleaner" will only work after this setup.

Map tip: if the vacuum cleaner does not correctly identify rooms, use the "Divide rooms" function in Mi Home. → "Edit" →"Divide and draw lines along the boundaries of the rooms, which will help you define the cleaning areas more accurately.

Every day.|In a day.|1-2 times a week|Just before cleaning.|Manual start-up as needed

-->

The solution to the problem: what to do if Xiaomi G1 not connected to the iPhone

Even with the correct follow-up, errors can occur, and below are the most common problems and ways to fix them, based on user feedback and recommendations from Xiaomi service centers.

1. "Cannot find the device" error (code 10008)

This error appears if the Mi Home can't detect it. G1 in a conjugation mode. Causes and solutions:

• 📵 Vacuum is not in setup mode. Repeat step with home buttons" +"Power" (5 seconds) Make sure the indicator flashes orange.
• 📶 Wi-Fi problems. Reboot your router. If the 2.4 GHz network is hidden, temporarily make it visible. VPN AdGuard on iPhone – they can block the connection.
• 📱 iOS Limitations. Go to iPhone Settings → Mi Home → Network and enable the Local Network option, which will allow the application to interact with devices on your network.

2.The vacuum cleaner plugs in but shuts off immediately

If G1 It appears in Mi Home, but disappears after a few seconds, check it out:

• 🔋 Battery charge. Put the vacuum cleaner on the base and wait for 100% charge. At low charge, the device can shut down to save energy.
• 🔄 If you already have other Xiaomi gadgets (like Yeelight bulbs), temporarily disconnect them from the Mi Home – sometimes Xiaomi servers limit the number of connected devices.
• 🌐 Check the status of Xiaomi servers at status.mi.com. If you have problems, wait 1-2 hours and try again.

3.The Mi Home app does not send notifications

If you do not receive notifications after you connect to the service when cleaning is completed or errors are made, do the following:

1. Open the iPhone Settings → Notifications → Mi Home.
2. Enable the options "Allow notifications", "Sounds" and "Signs".
3. At Mi Home, go to the profile. → Settings → Notifications and activate all switches.

Additional: If notifications are late, check if Mi Home has been added to the list of apps with a limited background update (iPhone Settings) → Mainstream → Content updates).

How to manage Xiaomi G1 iPhone: voice, schedule and smart scripts

Once connected successfully, you can automate the vacuum cleaner, and here are 3 ways to control it that save you time:

1. Voice control via Siri

To start the cleaning with a voice:

1. Open Mi Home and select G1.
2. Press "Automation" →"Voice commands".
3. Create a command, such as “Do the cleaning”, and link it to the “Start cleaning” action.
4. On iPhone, open Settings → Siri and search → Mi Home and enable the option "Add to Siri".

Now you can say, "Hey Siri, do the cleaning," and the vacuum cleaner will start working.

Automatic timetable

So that the cleaning starts by itself:

• At Mi Home, go to Cleanup → Schedule.
• Press "+ Add "and select days/times.
• Specify the type of cleaning (full, zone) and suction power.
• Save the schedule.

Tip: If you often forget to take out the garbage from the vacuum cleaner, set up a notification about filling the container in Settings → Notifications → Status of the device.

3.Smart scripts with other Xiaomi devices

If you have other Xiaomi gadgets (like motion sensors or smart sockets), you can create automation:

1. At Mi Home, go to Profile → Automation.
2. Press "+ Add" →"Smart script".
3. Select a condition (e.g., “Nobody is Home” by geolocation) and an action (e.g., “Start Cleaning”).
4. Save the script.

Example: A vacuum cleaner can start cleaning when you leave for work and return to base 30 minutes before you return.

💡

For smart scripts to work smoothly, all Xiaomi devices must be connected to one Mi Home account and be on the same Wi-Fi network.

Frequent questions about Xiaomi connectivity G1 iPhone

Conclusion: What to do after a successful connection

Now, your Xiaomi. G1 Ready to go, to make the most of the vacuum cleaner:

• 📅 Set up a schedule for days when you are not home – so cleaning will not interfere.
• 🗺️ Regularly update the map (once every 2 weeks or after rearranging the furniture).
• 🔄 Clean your brushes and filters every 1-2 months – this will prolong the life of the vacuum cleaner.
• 📱 Update your firmware through Mi Home to get new features.

If, after a while, the adjustment G1 Begins to "glutch" (for example, does not return to base or loses communication), try:

1. Reboot the vacuum cleaner (hold the power button for 10 seconds).
2. Reset network settings in Mi Home (Device settings) → Wi-Fi reset).
3. Update the Mi Home app to the latest version.

Last tip: If you plan to use a vacuum cleaner in a large house, consider buying an additional charging station – this will allow you to use it. G1 Continue cleaning without returning to base.

💡

Regular maintenance (brush cleaning, filter replacement) increases Xiaomi’s lifespan G1 Do not ignore the maintenance notifications in Mi Home!