Voice control of a robot vacuum cleaner through Yandex Station saves time and makes cleaning even more convenient. But many users face difficulties in the first synchronization: devices do not find each other, commands do not execute, or the application gives out errors. This article will help you understand all the nuances from preparing equipment to setting up voice scripts.
We will look at two main ways of connecting: through the Mi Home application (for models with Mi Home Automation support) and through Yandex Smart Home (for devices with Yandex IoT protocol). We will also analyze typical errors, for example, when Yandex Station does not see a vacuum cleaner or refuses to execute commands. If you have a Xiaomi model older than 2019, check its compatibility in the table below - some devices require a firmware update.
Important: the connection process may vary depending on the Yandex Station firmware version (Alice 2.0 or 3.0) and the vacuum cleaner model. For example, the Xiaomi Mi Robot Vacuum-Mop 2 Pro supports direct integration, and Mi Robot Vacuum 1S may require middleware like Home Assistant.
1. Verification of compatibility of the robot vacuum cleaner Xiaomi with Yandex Station
Not all Xiaomi robot vacuum cleaners are officially supported by Yandex Smart Home. Make sure your device is on the compatible list before setting up. Below is the up-to-date table for 2026:
| Model robot vacuum cleaner | Support for Yandex Smart Home | Is Mi Home Required? | Notes |
|---|---|---|---|
| Xiaomi Mi Robot Vacuum-Mop 2 Pro | Yeah (straight) | No. | Supports voice commands without additional applications |
| Xiaomi Mi Robot Vacuum-Mop P | Yes (via Mi Home) | Yes. | You need to link your Mi Home account to Yandex ID |
| Xiaomi Mi Robot Vacuum 1S | Partially. | Yes. | Home Assistant or Mi Home Automation Requires |
| Xiaomi Dreame Bot D9 | Yeah (straight) | No. | Supports schedule cleaning scenarios |
| Xiaomi Mi Robot Vacuum E10 | No. | — | Only management through Mi Home |
If your model isn’t on the list, check it out on Yandex’s official page. Outdated devices (before 2018) may not support integration at all, in which case consider alternatives like Google Assistant or Apple HomeKit (if available for your model).
Critical nuance: Xiaomi robot vacuum cleaners with Chinese firmware (for example, bought on AliExpress without a global version) may not connect to Yandex Station even if the model is supported, in which case you will need to reflash to the international version of the software.
2. Preparation of devices before connection
Before syncing, make sure that both devices meet the minimum requirements:
- 📱 Yandex Station should be connected to the same Wi-Fi network as the robot vacuum cleaner. If you have a dual-band router (2.4 and 5 GHz), choose a 2.4 GHz network - many Xiaomi models do not support 5 GHz.
- 🤖 The robot vacuum cleaner must be registered in the Mi Home app and linked to your account. If you haven't set up the device yet, do so according to Xiaomi's instructions.
- 🔄 Update the vacuum cleaner firmware to the latest version. Open Mi Home, select the device → Settings → Update of the PO.
- 📲 On the smartphone must be installed Yandex browser or Yandex application with the latest version.
Note: If your robot vacuum cleaner has previously been connected to another Mi Home account (such as a salesperson), reset to factory settings. To do this, press and hold the Reset button on the device body for 10 seconds until you hear an audible signal. After the reset, re-register to Mi Home.
How to check the firmware version of a robot vacuum cleaner?
Method 2: Direct connection via Yandex Smart Home (for new models)
Models like Xiaomi Mi Robot Vacuum-Mop 2 Pro or Dreame Bot D9 support direct integration with Yandex Station without intermediaries.
- Open the Yandex app on your smartphone and go to the Smart Home section.
- Click Add Device → Vacuum → Choose Xiaomi from the list of brands.
- Scan it. QR-code from the body of the robot vacuum cleaner or enter it S/N (The number can be found on a sticker under the lid of the device or in Mi Home. → About the device).
- Confirm the connection in the Mi Home app when an access request appears.
- Wait until the synchronization is complete (it can take up to 2 minutes), after which the vacuum cleaner will appear in the list of devices.
Note: if during scanning QR-When the error "Device is not supported", check:
- 📌 Your Mi Home region must be Russia or Global (China region is not supported).
- 🔄 The vacuum cleaner firmware version. Direct connections require software no older than 2023.
- 📶 Type of Wi-Fi network: Some models do not work with guest networks or VPN.
💡
If Yandex Station does not see a vacuum cleaner when connecting directly, try temporarily disabling the firewall on the router or adding devices to the white list" (MAC-Addresses can be found in the router settings).
5. Set up voice commands and scripts
Once successfully connected, you can control the vacuum cleaner by voice through Yandex Station, and here are the basic commands that are supported by most models:
- 🎤 "Alice, turn on the vacuum cleaner - the beginning of cleaning.
- 🎤 "Alice, stop the vacuum cleaner – shutdown.
- 🎤 "Alice, bring the vacuum cleaner back to base – return to the dock.
- 🎤 "Alice, start cleaning in the living room" - zone cleaning (if the rooms in Mi Home are set up).
To set up automatic scenarios (such as cleaning on schedule or when leaving the house), follow the following steps:
- Open the Yandex application → Smart home → choose your vacuum cleaner.
- Press Scripts. → Create a script.
- Select a condition (e.g. Time or Geolocation) and an action (Start cleaning).
- Save the script. Now the vacuum cleaner will start automatically.
For map-enabled models (Mi Robot Vacuum-Mop 2 Pro), you can configure room cleaning.
- In Mi Home, create and save a map of the room (start cleaning manually and wait for the map to be built).
- Name the rooms in the app (e.g., "Kitchen", "Bedroom").
- In Yandex Smart Home, when creating a script, select the action Clean in [room name].
💡
Voice commands are only in Russian. If your Yandex Station is configured in another language, change it in your device settings (Language and region).
6. Solving common problems
Even with the right setup, errors can occur, and here are the most common ones and ways to fix them:
| Problem. | Possible cause | Decision |
|---|---|---|
| Yandex Station does not see the vacuum cleaner | Devices in different Wi-Fi networks | Connect both devices to the same 2.4 GHz network |
| Commands are executed with a delay | Weak Wi-Fi signal or router overload | Restart the router or connect the vacuum cleaner over cable (if supported) |
| Error "Device not available" | Vacuum off or discharged | Charge the device and check its status in Mi Home |
| Geolocation scenarios are not working | Location access is disabled | Enable geolocation for Yandex application in smartphone settings |
| The vacuum cleaner is not returning to base | Incorrect map of the premises | Recreate the map in Mi Home (remove the old one and start cleaning again) |
Note: if after all the manipulations, the robot vacuum cleaner has not connected, check whether your antivirus or firewall is blocking the connection to Xiaomi or Yandex servers. Temporary disabling of protection can help diagnose the problem. Also make sure that your Mi Home account does not include two-factor authentication - it can interfere with automatic synchronization.