How to connect a Xiaomi vacuum cleaner to Wi-Fi: instructions for all models (2026)

Xiaomi vacuum cleaners are no longer a luxury, they are indispensable cleaning assistants, but without a Wi-Fi connection, you lose half of the functions: remote control, voice commands via Alice./Google The problem is that the pairing process often becomes a puzzle: the app can't see the device, the vacuum cleaner blinks hard red, the router refuses to give out. IP-address.

This article is not just a retelling of the official instructions, but it’s a full-blown analysis of all possible scenarios, from basic configuration via Mi Home to manual connection via Mi Home Lite or Dreamehome (for Dreame and Viomi models), and we’ve also analyzed typical errors on dual-frequency routers (2.4/5 GHz), which block connectivity 90% of the time, and gathered up-to-date data on compatibility with the latest firmware versions of 2026. If your vacuum cleaner refuses to connect, you’ll find a solution here.

1.Preparation: What to do before connecting

Before you try to connect the vacuum cleaner to the network, check four critical parameters:

• 📶 Wi-Fi frequency: Xiaomi vacuum cleaners only work at 2.4GHz. If your router broadcasts both networks (2.4 and 5GHz) under the same name (SSID), Solution: Separate networks in router settings or temporarily shut down 5 GHz.
• 🔒 Type of encryption: only supported WPA2-PSK (AES) or WPA/WPA2. If you WPA3 or TKIP, change the settings.
• 📱 Appendix: Most models (Mi Robot Vacuum-Mop 2 Pro, Dreame) D9 You will need Mi Home (European server) Viomi models (e.g., Mi Home, V3 Pro works through Viomi Home.
• 🔋 Charge: battery level should be at least 20%. With low charge, the vacuum cleaner can interrupt the pairing process.

Pay special attention to the region of your Mi Account. If you registered with Mi Home via a server in China or India, and the vacuum cleaner is purchased for the European market, there will be a firmware conflict.

⚠️ Attention: Xiaomi vacuum cleaners with firmware for China (CN) If the device produces an error "Unsupported device" after connecting, change the region in the Mi Home profile settings to China (Mainland) or flash the flashing.

2. Step-by-step instruction: connection via Mi Home

This method is suitable for most models, including Mi Robot Vacuum-Mop 2 Pro, Mi Robot Vacuum-Mop P, Dreame D9 and others.

1. Install the Mi Home app: 📱 Download the latest version from the App Store or Google Play. 🌍 When registering, select Europe (Russia) or China (Mainland) region - depending on the vacuum cleaner firmware.

Activate the conjugation mode on the vacuum cleaner:

• Add the device to Mi Home: 1. Open Mi Home → Press"+" →"Add Device" 2. Select "Clean" → "Robot vacuum cleaner" 3. Enter the Wi-Fi password (Latin and numbers only!) 4. Bring the phone to the vacuum cleaner (at a distance < 1 m)

If the process is suspended during the "Connection to the device" stage:

• 🔄 Restart the vacuum cleaner (hold the power button for 10 seconds).
• 📵 Turn on the plane mode for 10 seconds, then turn off.

3. Alternative ways of connecting

If the standard method doesn’t work, try one of these options:

For Viomi models (like the Viomi V3 Pro), use the Viomi Home app. The algorithm is similar to Mi Home, but with one caveat:

⚠️ Note: Viomi may request a confirmation code that comes to the email linked to the account when you first connect. If the email doesn't arrive, check the Spam folder or try changing the email in your profile.

4. Common mistakes and their solutions

Even with the right settings, the connection can end in error.

• 🚫 Error "Can't connect to the device": Reasons: Phone connected to the device VPN The Wi-Fi password has special characters (e.g.!, #, @). The router locks new devices (enable). DHCP Solution: change the password to a simple one (e.g. 12345678), disable VPN, reboot router.
• 🔴 Wi-Fi indicator flashes red: This means vacuum cleaner can't get IP-Router address, check if it's on. DHCP-server on the router. Is there a number of connected devices (on some routers the limit is 10 devices) MAC-filtering (if any, add it) MAC-whitelisting address).
• ⚠️ Mi Home Unsupported device error: Vacuum firmware is not compatible with the selected region. Solutions: Change region in Mi Home to China (Mainland). Update vacuum cleaner firmware through alternative software (e.g. Valetudo).

If none of the methods helped, try resetting the vacuum cleaner settings:

1. Turn off the vacuum cleaner.
2. Press the power + home button for 10 seconds.
3. Wait for the sound signal (squeak) and the flashing of the white indicator.

💡

If the vacuum cleaner is persistently not connected, try using another phone (especially if you have an iPhone with iOS 17+ - mDNS problems are known in newer versions of the system).

5.Configure after connecting: what to do next

After successfully pairing with Wi-Fi, set up the vacuum cleaner for maximum convenience:

• 🗺️ Map of the room: Start the first cleaning in "Full cleaning" mode. The vacuum cleaner will make a map of the apartment, which can then be edited in Mi Home: Divide into zones ("Living room", "Kitchen"), install virtual walls (to keep the vacuum cleaner from entering certain places). Set up a schedule (such as cleaning at 10:00 a.m. each day).
• 🔊 Voice control: Connect the vacuum cleaner to Alice (Yandex) or Google Assistant: 1. in Mi Home:"Profile" →"Settings" →"Smart home" →"Add to Yandex" 2. Tell Alice: "Find my devices" → You can pick a vacuum cleaner. You can now give commands like, "Alice, turn on the vacuum cleaner in the kitchen".
• 🔄 Update firmware: After connecting to Wi-Fi, check the relevance of the software: Mi Home → The device →"..." →"Important: Don't interrupt the process! If the update is hanging, wait 30 minutes - sometimes it's okay.

💡

After the first connection, be sure to update the vacuum cleaner firmware – this will fix bugs with a Wi-Fi connection in the future and add new features (for example, carpet recognition).

6. Connection to public networks (hotels, cafes)

Xiaomi vacuum cleaners do not support networks with authorization through the portal (for example, Wi-Fi in hotels, where you need to enter a username / password on the page).

• 📡 Create a hotspot on your phone: Activate modem modem on your smartphone, connect the vacuum cleaner to this network.
• 🔗 Use a travel router: Buy a portable router (e.g. TP-Link) TL-WR902AC), It connects to the hotel network and then distributes it like a regular Wi-Fi.
• 🖥️ Set up a proxy on your router: If you have access to your router settings (such as in a rented apartment), set up Proxy to bypass authorization.

⚠️ Note: In public networks, the vacuum cleaner can send data (such as room maps) to Xiaomi servers.If this is critical for privacy, use the device. VPN on the router or refuse to connect.

7.Security: How to protect a vacuum cleaner from breaking in

Wi-Fi-powered robot vacuum cleaners are a potential loophole for hackers, and in 2023, there were cases where attackers accessed vacuum cleaners (Mi Robot Vacuum-Mop 2 Pro has a built-in navigation camera) to minimize the risks:

• 🔐 Change your Wi-Fi password: Use a complex password (for example, k7#pL9!vR2$(q) and unplug WPS router.
• 🛡️ Set up network isolation: In the router settings, turn on AP Isolation (customer isolation) to prevent the vacuum cleaner from "seeing" other devices on the network.
• 🚫 Disable Remote Access: In Mi Home, go to Device Settings → Sharing and disabling the option "Remote management".
• 🔄 Update your firmware: Xiaomi regularly closes vulnerabilities. enable auto-update in vacuum cleaner settings.

If you use a vacuum cleaner with a camera (Mi Robot Vacuum-Mop 2 Pro, DreameBot L10), turn it off in the settings:

Mi Home → Device → “Camera settings” → “Switch off”

FAQ: Frequent questions