Why is it that just pulling a plug out of a socket is a bad idea?
Xiaomi Mi Vacuum Mop Robots (including models) 1C, 2 Pro, P10 and S10) They're designed to be on standby, which means that even when the device is asleep, it uses minimal energy to communicate with Wi-Fi, update the firmware and respond to voice commands. Many users mistakenly think that it is enough to press a physical button or remove the plug from the socket – but this approach is fraught with consequences.
When the power is cut abruptly (e.g., pulling a plug), the robot does not have time to correctly complete the background processes.
- 🔄 Failure of the room map – the device will “forget” the saved cleaning areas and virtual walls.
- 📱 Loss of communication with the Mi Home app – re-association will be required.
- ⚡ Battery damage – Lithium-ion batteries are sensitive to sudden voltage drops.
In this article, we will discuss 5 safe ways to disconnect – from standard to hidden, and also explain when you really need to remove the plug from the socket.
Method 1: Power button on the case - where it works and how
The most obvious method is to use a physical button on the body, but its location and functionality vary depending on the model.
| Model | Positioning of the button | Retention action | Short-press action |
|---|---|---|---|
| Mi Vacuum Mop 1C | Top panel, right | Total shutdown (3 seconds) | Pause/resume cleaning |
| Mi Vacuum Mop 2 Pro | Central button (backlit) | Shutdown + Error reset (5 seconds) | Return to base |
| Mi Vacuum Mop P10 | Hidden under the lid (right) | System restart (10 sec) | Switching cleaning modes |
To completely turn off the robot through the button:
- Make sure the device doesn’t clean (otherwise it will ignore the command).
- Find the power button (see table above).
- Hold it for 3-10 seconds until the beep or indicator blinks.
- Wait until all the LEDs go out, which means the robot is off.
⚠️ Note: On the Mi Vacuum Mop models S10+ And holding the button for more than 15 seconds causes the Wi-Fi settings to reset, and only use this method to shut down completely if you plan to keep the robot off-charging for longer than a month.
Make sure the robot is not on base (otherwise it will shut down after 10 minutes)
Cancel active tasks in the Mi Home app
Check the battery power (do not turn off at a level below 20%)
Wait for the firmware update to be completed (if it goes)
-->
Method 2: Turn off via Mi Home (Step-by-step)
If the physical button is not available (e.g., a robot is stuck under furniture) or you want to remotely disable the device, use the official app. This method works for all models connected to Wi-Fi.
Instructions:
- Open Mi Home and select your robot vacuum cleaner from the device list.
- Go to the Control section (the remote icon in the lower right corner).
- Press three points (⋮) in the upper right corner and select Device Settings.
- Scroll down to Power Block and tap Turn Off.
- Confirm the action - the robot will emit an audible signal and begin the process of disconnection.
Important nuances:
- 📶 The robot must be connected to Wi-Fi – without the Internet, the team will not reach the Internet.
- ⏳ The process can take up to 30 seconds (the device completes the current tasks).
- 🔋 If the battery is below 15%, the app will block the shutdown – this is a discharge protection.
💡
If the "Stop" button in the app is inactive, check if the robot is based.Some models (such as the Mi Vacuum Mop 2 Lite) block the remote shutdown while charging.
Method 3: Voice commands via Alice, Google Assistant or Siri
Xiaomi’s Yandex-enabled Alice or Google Home robot vacuum cleaners can be turned off by voice, which is convenient if you’re in another room or want to automate the process (e.g., turn off the vacuum cleaner on schedule).
Supported teams:
- 🎤 For Alice: "Alice, turn off the vacuum cleaner" or "Alice, stop cleaning and turn off the Mi Vacuum Mop».
- 🤖 For Google Assistant: “OK, Google, turn off the robot vacuum cleaner” (English: “Hey Google, turn off Xiaomi vacuum»).
- 🍎 For Siri (via HomeKit):** "Hi Siri, turn it off" <device name in HomeKit>».
How to set up voice control if it doesn’t work:
- Make sure the robot is connected to the same Mi Home account as the voice assistant.
- In the Mi Home app, go to Device Settings → Voice assistant and connect the robot with Alice/Google.
- Siri will need to add a robot to Apple HomeKit through the Home app (only for models with HomeKit support, such as the Mi Vacuum Mop). P10).
⚠️ Warning: Voice command "turn off" doesn't always mean total power outages.Some models (e.g. Mi Vacuum Mop) 1T) After such commands go to sleep, but continue to consume energy to maintain communication with Wi-Fi.
Method 4: Automatically shut down on schedule (hidden function)
Few people know, but Xiaomi’s robot vacuum cleaners have a timer-only automatic shutdown feature that’s useful if you want the device to shut down at night or in your absence, saving battery life.
How to set up:
- In the Mi Home app, go to the robot settings.
- Choose a schedule. → Add a challenge.
- As an action, specify Turn Off (not to be confused with Stop Cleaning).
- Set the time and days of the week (for example, daily at 23:00).
- Save the task – the robot will turn off automatically.
Limitations of function:
- ⏰ It only works if the robot is not on the base (otherwise it will ignore the command).
- 🔌 Does not turn off the power dock – it remains in standby mode.
- 📵 If the robot is in the process of cleaning, the timer will only work after it is completed.
What if the robot doesn’t turn off on schedule?
Method 5: Complete disconnection from the network (when it is really necessary)
Remove the plug of the docking station from the socket is only in three cases:
- Long-term storage (more than 1 month) to avoid battery discharge.
- Repair or cleaning – for safety when disassembling the device.
- Reset to factory settings – if the robot freezes and does not respond to other commands.
How to disconnect from the network correctly:
- First, turn off the robot through a button or application (see methods 1–2).
- Wait until all the indicators at the docking station (usually 1-2 minutes) are turned off.
- Take the plug out of the socket carefully.
- If you plan to store the robot for a long time, remove it from the base and leave it in a dry place with a battery charge of 40-60%.
⚠️ Warning: After a complete disconnection, the robot may need up to 5 minutes to re-initialize the next time it turns on.
💡
Removing the plug from the socket without first turning off the robot is possible only in emergency cases (fire, flooding), in other situations, this will lead to a failure of the system.
Frequent Mistakes and How to Avoid Them
Even experienced users sometimes make mistakes when turning off the robot vacuum cleaner.
| Mistake. | Effects of consequences | How to avoid |
|---|---|---|
| Shutting down during firmware update | "Briqueting" of the device (not included) | Wait for the update to complete (the indicator flashes blue) |
| Shutting off the network at low charge (<10%) | Deep battery discharge (replacement required) | Charge the robot to at least 30% before turning it off |
| Use the Reset button instead of the power button | Resetting all settings and room maps | Press only the marked Power button (usually with an icon) ⏻) |
Critical error: If the robot emits a continuous beep after turning off, it means that it has not completed saving the map of the room, in which case, immediately turn it back on and wait until the signal stops (usually 1-2 minutes).
Another common problem is that the robot doesn't want to shut down through the app, most often it's related to:
- 🌐 Unstable Internet – Check the Wi-Fi connection.
- 📱 Older version of Mi Home – update the app in the App Store/Google Play.
- 🔄 Schedule Conflict – Remove Repetitive Tasks in Robot Settings.