How to turn off the robot vacuum cleaner Xiaomi at night: all ways with explanations

Xiaomi’s robot vacuum cleaner is an indispensable cleaning assistant, but its nightly “walks” can be annoying: engine buzzing, accidental collisions with furniture or light bulbs turned on at 3 a.m. This is especially true for owners of Mi Robot Vacuum-Mop 2 Pro, S7 or S6 MaxV models, where automatic schedules can be set by default. In this article, we will examine all possible ways to turn off the vacuum cleaner at night – from basic (button on the case) to advanced (via Mi Home or Google Assistant).

It's important to understand that "disconnecting" doesn't always mean physically pulling the plug out of the plug, but it's about temporarily shutting down, blocking the start on schedule, or completely deactivating for a certain period of time, and we'll also look at why a vacuum cleaner can spontaneously turn on at night even after manually shutting down, a common problem for users who have upgraded to the latest firmware.

1. Disconnecting the button on the case: the fastest way

If you need to stop cleaning or lock the vacuum cleaner for a few hours, use physical buttons on the case.This method works on all Xiaomi models, including the Mi Robot Vacuum 1S, S5 and S7+.

Instructions:

🔘 Press and hold the Power button (or Home on some models) for 3-5 seconds until you hear the beep. The vacuum cleaner turns off and goes into standby mode.
🔄 To completely turn off the power, press the button again - the indicators will go out (on models with a removable battery it is safe).
⚡ On Xiaomi Mi Robot Vacuum-Mop P and the newer button can be touch-sensitive – touch it twice at intervals of 1 second.

⚠️ Warning: If the vacuum cleaner is connected to the docking station, it can automatically turn on to recharge, so to avoid this, disconnect the station from the socket or transfer the vacuum cleaner to another place.

📊 Your Xiaomi robot vacuum cleaner turns on at night without your team?

Yeah, regularly.

Sometimes.

No, just on schedule.

I didn't notice it.

2. Schedule setting in the Mi Home app

The most reliable way to monitor nighttime activity is to edit or disable schedules through the official Mi Home app (or Xiaomi Home for newer versions), a method that is suitable for all models that support Wi-Fi connectivity.

Step-by-step:

Open Mi Home and select your vacuum cleaner from the list of devices.
Go to the Schedule (or Timer in English).
Click on an existing job (if any) and select Remove or disable Activity slider.
To create a new schedule (for example, only during the day), click Add and specify the time from 08:00 to 20:00.

📌 Important: Some firmware (e.g. Mi Robot Vacuum-Mop 2 Lite) may reset the schedule after the update. Check the settings every 1-2 weeks.

Delete all night assignments|Make sure the Activity slider is off|Save the changes with the "Ready" button"|Reset the vacuum cleaner after changes-->

3.Using Do Not Disturb (DND) mode

Many users don’t know that Xiaomi has a smartphone-like “Do Not Disturb” mode that temporarily blocks all automatic tasks, including scheduling, map updates, and notifications.

How to turn on:

📱 In the Mi Home app, go to Device Settings → Don't disturb mode".
⏰ Set the time from 22:00 to 07:00 (or other interval).
✅ Activate the slider Include.

⚠️ Attention: On models S5 older-regime DND If the vacuum cleaner ignores the settings, update the firmware through Settings → Update of the PO.

Model vacuum cleaner	Does it support DND?	Features
Mi Robot Vacuum 1/1S	❌ No.	Only manual shutdown
Mi Robot Vacuum-Mop 2 Pro	✅ Yes.	It works with firmware 3.5.9+
Xiaomi Robot Vacuum S7	✅ Yes.	You can set exceptions for zones
Dreame D9 (Xiaomi clone)	✅ Yes.	It's called "Silent Regime."

4. Disconnection through voice assistants (Alice, Google, Siri)

If your vacuum cleaner is integrated with Yandex Alice, Google Assistant or Apple HomeKit, you can control your voice, which is convenient when you need to urgently stop cleaning without getting out of bed.

Teams for different assistants:

🗣️ Alice: "Alice, stop cleaning the living room" or "Alice, turn off the robot vacuum cleaner».
🤖 Google Assistant: OK, Google, suspend Xiaomi Vacuum».
🍎 Siri: Hi Siri, set Do Not Disturb for vacuum cleaner from 23:00 to 8:00».

⚠️ Attention: Voice commands work only when the vacuum cleaner is connected to Wi-Fi in a stable way. If the router reboots at night, communication may be interrupted and the vacuum cleaner will turn on on as scheduled.

💡

Add the vacuum cleaner to your favorite devices in the Yandex or Google Home app – so Alice and Google will recognize it faster by voice commands.

5. Physical power outage: When nothing helps

If the software methods don't work (e.g., the vacuum cleaner ignores the schedule or wakes up on its own), it leaves the network completely disconnected.

Ways:

🔌 Remove the dock plug from the socket. S7+ The newer station has its own battery - it must be discharged (leave off by 12).+ hours).
🔋 Remove the battery from the vacuum cleaner (only for models with removable battery, such as the Mi Robot Vacuum 1.
🛡️ Use a smart socket (e.g. Xiaomi Mi Smart Plug) with a nighttime shutdown timer.

🔴 Warning: Frequent battery removal can damage contacts. If the vacuum cleaner is warranted, this method will void it.

What if the vacuum cleaner turns on on itself?

This may be due to: 1) firmware failure - try to reset to factory settings (Settings → Reset). 2 Xiaomi server error - disconnect the vacuum cleaner from the cloud in the application settings. 3) Docking station problem - wipe the contacts with alcohol and reconnect the station.

6.Problems and Solutions: Why the Vacuum Cleaner Ignores Settings

Even after a schedule is turned off or DND activated, the vacuum cleaner can be turned on at night.

Problem.	Possible cause	Decision
Included in 3-4 a.m.	Auto-update maps or firmware	Turn off automatic updates in settings
Start cleaning 10 minutes after switching off	Timer failure after update	Restart the vacuum cleaner (hold the power button for 10 seconds)
Ignoring the DND regime	Zone cleaning conflict	Remove all areas in the card settings
He returns to the station and turns on.	Charge sensor error	Clean the station and vacuum cleaner contacts with a cotton swab

🛠️ If none of the methods helped, try resetting to factory settings:

In the Mi Home app, go to Device Settings → General → Resetting.
Confirm the action and wait for the reboot (it will take 2-3 minutes).
Configure the vacuum cleaner again, but don’t connect to the cloud unless you want automatic updates.

💡

If the vacuum cleaner turns on at night after reset, the problem is most likely a hardware failure – contact the Xiaomi service center.

FAQ: Frequent questions about Xiaomi shutdown overnight

🔹 Can I turn off the vacuum cleaner at night without touching the docking station?

Yes, it is enough to turn off the schedule in the application or activate the DND mode. Physically disconnect the station is not necessary, but if the vacuum cleaner returns to charging itself, it will have to be removed from the outlet.

🔹 Why After Updating the Firmware, the Vacuum Began to Turn on at Night?

In newer firmware versions (e.g. 3.6.0+), Xiaomi has added background card sync and update checks. This can wake up the vacuum cleaner. Solution: disable Auto Update in settings and manually check for updates once a month.

🔹 How to turn off the sound signals of the vacuum cleaner at night without turning it off?

Go to Settings → Sounds and Alerts and turn off voice prompts or turn the volume down to a minimum. Some models have a separate Quiet Clean mode.

🔹 Can I use a timer on a smart socket to turn off?

Yes, but two things to consider: the vacuum cleaner must be at the station (or it will run out); once the socket is turned on, the vacuum cleaner can start automatically (depending on the model); it is better to combine the socket with DND mode.

🔹 What to do if the vacuum cleaner turns on at 3:00 and does not respond to commands?

This is a typical sign of a time module failure: Try: Reset the time settings in the app (Settings → Date and Time → Sync), turn off the vacuum cleaner from the Wi-Fi for 10 minutes, then reconnect. If it doesn't work, take it to the service (maybe you need a replacement motherboard).