How to Connect Xiaomi Wireless Mouse 2: Instructions for All Devices

The Xiaomi Wireless Mouse 2 has become a popular accessory due to its minimalist design, compact size and universal compatibility. However, many users face difficulties when connecting for the first time – especially if it is a question of pairing with multiple devices or non-standard OS. This article will help you to understand all the nuances from basic configuration to solving typical errors.

We will look at three main ways of connecting: via built-in Bluetooth 5.0, using the USB-receiver (if it comes with a set) and even non-obvious options for smartphones and tablets. Special attention is paid to problems with drivers on Windows, features of macOS and Linux, as well as the subtleties of working with Mi UI If your mouse refuses to connect or is running with delays, here you will find proven solutions.

Components and specifications

Before connecting, make sure that the box with Xiaomi Wireless Mouse 2 contains all the necessary components.

• 🖱️ The wireless mouse itself (black, white or gray depending on the version)
• 🔋 1 × battery AAA (sometimes already established)
• 📡 USB-receiver 2.4 GHz (in some versions may be absent)
• 📄 Short instructions in several languages (including Russian)

If USB-There's no receiver in the kit -- don't worry, the mouse supports Bluetooth connectivity, which is even more convenient for modern devices:

An important nuance: Xiaomi Wireless Mouse 2 does not support Multi-Device technology.If you need this feature, look for the Xiaomi Mi Bluetooth Mouse 2 or newer versions of the series.

Preparing the mouse for the first connection

Before pairing with any device, a basic mouse training is required, a step that is often missed, leading to connection errors.

1. Battery installation: Open the compartment on the bottom of the mouse (pull the lid towards the arrow). AAA - Make sure the contacts are not oxidized.
2. Activate the pairing mode: Press and hold the on button (located under the scrolling) for a period of time 3-5 seconds until the indicator flashes blue (Bluetooth mode) or red (mode) 2.4 GHz).
3. Indicator check: If the LED doesn't flash, the battery is dead or not installed correctly. Try replacing it or reinstall it.

If you use USB-receiver, paste it into the free port of the device before turning on the mouse. 10/11 macOS, but Linux may need manual configuration (more on this below).

Is the battery installed correctly?

Does the indicator flash at the mice?

Is it inserted? USB-receiver (if any)?

Is the mouse within a radius of 1 meter from the device?-->

⚠️ Warning: If the mouse has previously been paired with another device, reset the device. To do this, hold the on button for 10 seconds until the indicator goes out and flashes again.

Connecting to Windows 10 and 11

Windows 10 and 11 support Xiaomi Wireless Mouse 2 out of the box, but sometimes you need to manually configure the drivers.

Method 1: Through Bluetooth

This is a universal method that works on any device with Bluetooth 4.0 and higher.

1. Open Settings → Devices → Bluetooth and other devices.
2. Activate Bluetooth (slider in the "On" position).
3. Click Add Bluetooth or another device → Bluetooth.
4. Find it in the list. MI Mouse (or Xiaomi Wireless Mouse 2) and select it.
5. Confirm the pairing. The mouse is ready to go.

If the device is not listed:

• 🔄 Reboot the Bluetooth module (turn it off/on in settings).
• 📱 Make sure the mouse is in pairing mode (blinking blue indicator).
• 🚫 Check if the antivirus (such as Kaspersky or Avast) blocks the addition of new devices.

Method 2: Through USB-receiver

If it was in the set USB-receiver (small black flash drive), connection is even easier:

1. Put the receiver in. USB-port.
2. Turn on the mouse (button below the scrolling). The indicator should flash red.
3. Wait for the automatic driver installation (usually takes a lot of time) 10-30 seconds).

If the mouse doesn't work:

• 🔌 Try another one. USB-port USB 2.0, as 3.0 can cause conflict).
• 🖱️ Restart your computer with a connected receiver.
• 📥 Manually install the driver from Lenovo’s website (Xiaomi uses their chips for receivers).

💡

If the mouse connects, but the cursor moves in jerks – disable in the Windows settings option “Allow Windows to turn off this device to save power” for USB-receiver.

Connect to macOS (MacBook, iMac)

On Apple devices, the pairing process is similar to Windows, but there are several nuances associated with the features of the macOS Bluetooth stack.

1. Open System settings → Bluetooth.
2. Make sure that Bluetooth is enabled (the icon in the menu bar should be blue).
3. Click Connect next to the MI Mouse in the list of devices.
4. If you have a request to enter the code, leave the field empty and press Enter.

Typical problems on macOS:

• 🍎 The mouse connects, but through 5-10 Solution: Open the Terminal and execute the command: sudo defaults write /Library/Preferences/com.apple.Bluetooth.plist ControllerPowerState -int 1 Then restart the Mac.
• 🔄 Solution: Turn off the mouse, remove it from the list of devices, and reconnect it.

⚠️ Note: On a Mac with Apple Silicon chips (M1/M2) You may need to update your mouse firmware via Mi Bluetooth Assistant (Windows app".

Linux Connection (Ubuntu, Mint, Fedora)

Linux systems usually work well with Xiaomi Wireless Mouse 2, but sometimes manual tuning of the Bluetooth stack or kernel is required.

Method 1: Bluetooth (blueZ)

Majority of modern Linux distributions use the BlueZ stack. Follow these steps:

1. Open a terminal and run: bluetoothctl
2. Turn on the Bluetooth adapter: power on
3. Start scanning for devices: scan on
4. When you see MI Mouse in the list, note its MAC-address (e.g., XX:XX:XX:XX:XX:XX).
5. Pair and connect: pair XX:XX:XX:XX:XX:XX connect XX:XX:XX:XX:XX:XX

If the connection fails with the error Failed to pair: org.bluez.Error.AuthenticationFailed, try:

• 🐧 Restart the Bluetooth service: sudo systemctl restart bluetooth
• 🔧 Install the latest BlueZ version (5.62 or higher).

Method 2: USB-receiver

If you use USB-receiver, but the mouse is not identified, check the output of the command:

lsusb

A device with an identifier should appear in the list 0489:e0a1 (Foxconn/Xiaomi) if there's no:

• 🔌 Try another one. USB-port.
• 📥 Install the rtbth driver for the kernel: sudo apt install rtl8723bs-dkms

Connection to smartphones and tablets (Android, iOS)

While Xiaomi Wireless Mouse 2 is marketed as a computer mouse, it can also be connected to mobile devices, such as DeX Mode on Samsung or Mi Desktop Mode on Xiaomi smartphones.

• 📱 Android requires version 7.0 Nougat or later.
• 🍏 Nana iPhone/iPad The mouse will only work in AssistiveTouch mode (limited functionality).
• 🖱️ Full cursor support is available only on Android 10 tablets+.

Instructions for Android

1. Open Settings → Connected devices → New device.
2. Select Xiaomi Wireless Mouse 2 from the list.
3. Confirm the pairing. The mouse will be in cursor mode.

To activate Mi Desktop Mode on Xiaomi smartphones:

1. Connect the mouse to Bluetooth.
2. Connect your phone to the docking station or through USB-C → HDMI monitor-to-screen.
3. In the notification curtain, select Desktop Mode.

Instructions for iOS (iPhone/iPad)

On Apple devices, the mouse will only work as an AssistiveTouch tool.

1. Open the Settings. → Universal access → Touching → AssistiveTouch.
2. Turn on Pointer Devices and press Bluetooth devices.
3. Choose. MI Mouse from the list.

Restrictions on iOS:

• 🚫 No right mouse button support.
• 🎯 The cursor will be displayed as a circle (not an arrow).
• 🔄 Skroll only works in a vertical direction.

💡

On Android, the mouse works as a full pointing device, and on iOS – only as an auxiliary tool for people with disabilities.

Updating firmware and solving problems

If the mouse is unstable (delays, spontaneous shutdowns), the cause may be outdated firmware. Xiaomi periodically releases updates for its accessories, but the process of installing them is not obvious.

How to update firmware

Officially updated through the Mi Bluetooth Assistant app (Windows only):

1. Download the utility from the official website of Xiaomi.
2. Connect your mouse via Bluetooth or USB-receiver.
3. Run Mi Bluetooth Assistant and wait for the device to be determined.
4. If an update is available, click Update and follow the instructions.

Important:

• 🔋 Do not turn off the mouse during the update (may cause "bricking").
• 🖥️ Use Windows. 10/11 — On macOS and Linux, the utility does not work.

Typical problems and solutions

⚠️ Warning: If the mouse stops working after the firmware update, reset (hold the 15-second switch) and return it to factory settings.

FAQ: Frequently Asked Questions