How to turn on the stream from a laptop to a Xiaomi TV: all ways 2026

Broadcasting your laptop screen to your Xiaomi TV opens up new possibilities, from watching movies on the big screen to presentations and streams. But it’s not always clear which method to choose — wireless or wired, embedded features or third-party applications. In this article, we will discuss all the current ways of connecting, their pros and cons, as well as the typical errors that interfere with stable broadcasting.

Xiaomi TVs (Mi TV, Redmi Smart TV, Xiaomi TV A, etc.) are designed to support most of today’s wireless transmission protocols, from Miracast to Apple AirPlay. However, not all laptops are compatible with these technologies out of the box. For example, older Windows 7 models may not support Wi-Fi Direct, and MacBooks will require additional customization. We tested all methods on Xiaomi Mi TV P1, Redmi Smart TV X55 and Xiaomi TV A2 43” — the results are summarized in the comparison table below.

If you need to show a presentation or run a game on a big screen, start with a wired HDMI connection, which is the most reliable way. For regular use (for example, streaming video), you better set up wireless broadcasts. And if you have a MacBook, look at the AirPlay section - there are nuances with Xiaomi TVs older than 2020.

Preparation of Xiaomi laptop and TV

Before setting up the broadcast, make sure that both devices meet the minimum requirements:

• 📺 Xiaomi TV: Update your firmware to the latest version (current for 2019-2026 models). → On TV. → Update: Older versions (e.g. Mi) TV 4A 2018 may not support AirPlay or Wi-Fi Direct.
• 💻 Laptop on Windows: Windows is required 10/11 Miracast-enabled (checked in Settings) → System system → Screen. → Connect to a wireless display. On Windows 7/8 You will need a WiDi adapter or third-party software.
• 🍎 MacBook: macOS 10.14+ Apple may be required on models up to 2018 TV mediator.
• 🔌 Network: laptop and TV must be connected to the same Wi-Fi network (for methods over a local area network). for Miracast and Wi-Fi Direct network is not necessary, but the distance between devices should not exceed 10 meters.

Also check:

• 🔋 Laptop charge: Wi-Fi broadcasts consume up to 20-30% of battery per hour.
• 📡 Wi-Fi signal: for stable video transmission to 4K The network speed should be at least 25 Mbps. Use the 5 GHz band if the router supports it.
• 🔊 Sound: By default, it can only be transmitted through HDMI For wireless methods, check the audio settings on your laptop.

⚠️ Attention: On Xiaomi TVs with firmware MIUI TV 3.0 and below (release until 2020) Miracast may not work well. Update the software or use alternative methods.

Method 1: Wired connection via HDMI

The most reliable and versatile method is to connect your laptop to your Xiaomi TV via an HDMI cable, suitable for all laptop models (including old ones) and TVs, guaranteeing minimal latency and support for 4K@60Hz.

You'll need:

• 🔌 Cable HDMI 2.0 (for) 4K) or HDMI 1.4 (for Full) HD). For laptops without a port HDMI An adapter may be required (for example, USB-C → HDMI MacBook or Xiaomi Notebook Pro).
• 🎮 If you plan to play, choose a cable with support. HDMI 2.1 (for 4K@120Hz).

Step-by-step:

1. Connect one end of the HDMI cable to your laptop, the other to the HDMI IN port on your Xiaomi TV (usually numbered: HDMI 1/2/3).
2. On the TV remote, press the Input (or Source) button and select the appropriate HDMI port.
3. On a laptop: 🪟 Windows: press Win + P and select Duplicate, Expand, or Second Screen Only. 🍎 MacOS: Open System Settings → Monitors and set up permission.
4. If the image doesn't show up, check: Cable (try another HDMI port on your TV) Resolution settings on your laptop (should match supported TV, such as 3840×2160 for Xiaomi Mi TV Q1).

⚠️ Note: If, after connecting through HDMI There's no audio on Xiaomi TV, check your audio output settings on your laptop. In Windows, close the Control Panel. → Sound and select the device NVIDIA High Definition Audio for video cards NVIDIA) or Realtek HDMI Output.

HDMI port on the TV is free

The cable supports the required permission.

Laptop switched to screen duplication mode

The sound is set to output through HDMI-->

Method 2: Wireless broadcasting over Miracast (Windows)

Miracast is a wireless image transmission standard supported by most Xiaomi TVs (except the oldest models), the advantages of the method: no router, minimal latency (up to 50 ms), Full HD support. However, 4K will require a TV with Miracast 2.0 (for example, Mi TV Q2).

How to check Miracast support on your laptop:

1. In Windows, open Settings → System → Screen → Connect to a wireless display.
2. If the option is active, your laptop supports Miracast. If not, upgrade your graphics card drivers (especially for Intel HD Graphics) or use an external adapter (such as Microsoft Wireless Display Adapter).

Instructions for connection:

1. On Xiaomi TV: Open Settings → Connection and Sharing → Wireless Display. Activate Miracast (or Wi-Fi Display on older models).
2. On the laptop: Press Win + K (or Win) + P → Connect to a wireless display. In the list of available devices, select your Xiaomi TV (the name will be MiTV-XXXX). Confirm the connection on the TV (you may need to enter it). PIN-code).
3. If the image does not appear: 🔄 Reboot both devices. 📶 Make sure that the distance between the laptop and the TV is not more than 5 meters. 🔧 Update your Wi-Fi adapter drivers on your laptop (especially relevant for Realtek and Broadcom).

Typical problems and solutions:

• 🖥️ No Sound: Open Control Panel in Windows → Sound and select Miracast Audio output device.
• 🐢 Video Delay: Reduce the broadcast resolution to 1280×720 in Miracast settings.
• 🚫 Connection breaks: Turn it off VPN or firewall on a laptop – they can block the connection.

💡

If your laptop doesn’t support Miracast, there’s a port USB, You can use the ScreenBeam Mini 2 adapter (~2000₽). It emulates a wireless display and even runs on Windows 7.

Method 3: Wi-Fi Direct (for Android and Windows)

Wi-Fi Direct is an alternative to Miracast, which allows you to connect directly to your TV without a router. Supported by all Xiaomi TVs on MIUI TV 2.0 and later. The main difference from Miracast is the ability to transfer not only the screen, but also files (photos, videos).

How to set up Wi-Fi Direct:

1. On TV: Go to Settings → Network & Internet → Wi-Fi Direct. Enable the function and remember the network name (e.g. DIRECT-MiTV-XXXXX) and password.
2. On a Windows laptop: Connect to your TV's Wi-Fi Direct network as a normal hotspot. Run the Win+K stream (similar to Miracast).
3. On MacBook: Install the AirParrot or Reflector app (paid, ~1500₽), MacOS does not support Wi-Fi Direct directly.

Advantages of Wi-Fi Direct:

• ✅ It works without a router.
• ✅ Supports file transfer (for example, you can throw video from a laptop to a TV without broadcasting the screen).
• ✅ Less latency than yours. DLNA.

Disadvantages:

• ❌ MacBook requires third-party software.
• ❌ Not all applications support audio output via Wi-Fi Direct (e.g., Zoom or Discord may be silent).

Method 4: AirPlay for MacBook and iPhone

If you have a MacBook or an iPhone, you can use Apple AirPlay to stream to a Xiaomi TV. However, there are nuances: officially AirPlay is only supported on Xiaomi 2020 and newer models (with MIUI TV 3.0+ firmware).

How to turn on AirPlay on your Xiaomi TV:

1. Open Settings → Connection and Sharing → Apple AirPlay
2. Activate the option and come up with a device name (e.g. Xiaomi TV Salon).
3. In the Settings section, select who can connect: All or Only Contacts.

How to stream from a MacBook:

1. Make sure that your laptop and TV are connected to the same Wi-Fi network.
2. In the macOS menu bar, click on the screen control icon (or Control Center → Screen Mirroring).
3. Choose your Xiaomi TV from the list.
4. If you request a code, enter it from the TV screen.

For Xiaomi TVs older than 2020 (e.g. Mi TV 4X):

• 🔧 Install the AirScreen app on your TV (available in Mi) TV App Store).
• 📱 On a MacBook or iPhone, stream the screen via Screen Mirroring by selecting AirScreen-XiaomiTV.

⚠️ Note: When streaming via AirPlay on Xiaomi TVs, there may be no sound in some apps (e.g. Netflix or YouTube). DRM. Solution: Use HDMI Or stream the sound separately via Bluetooth.

Method 5: Third-party applications (Steam Link, ApowerMirror)

If the built-in methods don’t work or you need additional features (for example, streaming games), you can use third-party applications. We tested Steam Link (for gamers), ApowerMirror (a universal solution) and TeamViewer (for remote management).

Comparison of annexes:

Instructions for Steam Link (for gamers):

1. Install Steam Link on Xiaomi TV via Google Play (available on Android TV models).
2. On your laptop, install Steam and enable Settings → Remote gameplay.
3. Connect the gamepad to the TV (by Bluetooth or USB).
4. Run Steam Link on your TV and select your laptop from the list.

For ApowerMirror:

1. Download ApowerMirror to your laptop and TV (the Android TV version).
2. Connect both devices to the same Wi-Fi network.
3. On the laptop, enter PIN-TV-code.
4. Select Mirror or Control from the TV.

💡

For streaming games from a laptop to Xiaomi TV, the best suited Steam Link - minimal latency and support for gamepads. Miracast or Wi-Fi Direct is enough for office tasks.

Typical problem solving

Even if you set it up properly, the broadcast can be unstable, and we've collected some of the most common errors and ways to fix them:

• 🔴 TV not on the list of devices: Check if it is on Miracast/Wi-Fi Direct on TV. Update your Wi-Fi adapter drivers on your laptop (especially for Realtek) RTL8821CE). Turn it off. VPN Firewalls – they can block device detection.
• 🎵 No sound when broadcasting: Open Control Panel in Windows → Sound and select the Miracast Audio device or NVIDIA On MacBook, check what in System Settings → Sound is chosen as the output device for the television. HDMI: Make sure the cable supports sound (on some adapters) USB-C → HDMI audio-free).
• 🖼️ Image blurred or cropped: On a laptop, set the resolution supported by the TV (e.g, 1920×1080 instead 4K, If the TV is old, open screen settings on Windows → Additional screen settings and select mode Recommended.
• 🐌 Large delay (lag): For Miracast/Wi-Fi Direct: Reduce the resolution to 1280×720. Connect to the network. 5 GHz instead of 2.4 Close background apps on your laptop (especially torrents or downloads).

Critical error: If after connecting to HDMI, the Xiaomi TV shows “No signal”, but the cable is working, try manually turning on the desired port. On the remote, press Input → select HDMI 1/2/3 → hold OK 5 seconds to reset the port.

If none of the methods work, check:

• 🔌 Powering TV: some Xiaomi models (e.g. Mi) TV 4A) They may not detect the devices at low voltage on the network.
• 📡 Wi-Fi interference: If microwaves or other routers are running nearby on the same channel, the broadcast will be interrupted.

FAQ: Frequent questions