How to reset Wi-Fi settings on Xiaomi smartphone: 5 working ways

Resetting Wi-Fi settings on Xiaomi smartphones is one of the most popular procedures for solving network connection problems. Unstable signal, inability to connect to a stored access point or authentication errors are often solved by cleaning network settings. However, many users face difficulties: where to find the right settings, how not to delete excess data, and what to do if the reset did not help.

In this article, we will look at all the current ways to reset Wi-Fi settings on Xiaomi, Redmi and POCO devices, from standard methods through menus to hidden features for power users. We will focus on nuances that the manufacturer does not always voice: for example, why not only networks but other communication parameters can disappear after a reset, or how to avoid data loss when connecting.

Why you might need to reset Wi-Fi on Xiaomi

Before starting a reset, it is important to understand when this procedure is really necessary, and most often users face the following problems:

• 🔌 Smartphone does not connect to previously saved network, despite the correct password.
• 📶 The connection is permanently terminated, especially when switching between 2.4 GHz and 5 GHz.
• ⚠️ Error "Authentication..." or "Receiving" IP-address".
• 🔄 The device doesn’t see some networks, although they are available on other gadgets.
• 🛠️ After updating MIUI Wi-Fi is missing or it is not working properly.

In 80% of cases, network resets solve these problems, but if the issue is related to a hardware malfunction (for example, a damaged Wi-Fi module), software manipulation will not help. To rule out this, try connecting to another network or checking the module in modem mode (internet distribution).

⚠️ Note: If the problem persists after resetting, and in Settings → The phone. → Version. MIUI You see the old firmware, you update the system first. MIUI 12-13 There were bugs with Wi-Fi drivers fixed in newer builds.

Method 1: Remove a separate Wi-Fi network

If the problem occurs with only one access point, you don't have to reset all the settings, just remove it from the list of saved networks, which is the safest method, since it does not affect other communication parameters (mobile Internet, Bluetooth).

Instructions:

1. Open the Settings. → Wi-Fi.
2. Click on the name of the problem network in the list.
3. Tap "Delete" (or "Forget Network" in newer versions of MIUI).
4. Confirm the action.

Then try to reconnect by entering your password. If the network is still down, move on to the next one.

Method 2: Reset all network settings

If you have problems with multiple networks or if the device is unstable with any connection, you can completely reset the network settings.

• 📡 All saved Wi-Fi networks and their passwords.
• 📱 Mobile Internet settings (APN).
• 🔗 Bluetooth settings (paired devices).
• 🌐 Settings VPN (if used).

Important: data SIM-cards (contacts, SMS) Not affected, but you will have to re-enter passwords from Wi-Fi and configure mobile Internet.

How to perform the reset:

1. Go to Settings → System and device → Additional → Resetting.
2. Select "Reset Network Settings" (in some firmware - "Reset Wi-Fi, mobile network and Bluetooth").
3. Confirm the action by entering PIN-code.
4. Wait for the device to restart (it will take 1-2 minutes).

⚠️ Attention: On devices with MIUI 14+ After the reset, you may need to re-activate the developer mode if it was previously enabled.

Method 3: Reset via Recovery Mode (for power users)

If the smartphone doesn't load or the settings menu isn't available, you can reset the network settings through Recovery mode, which is also useful if the standard reset didn't work, but it's more risky: if you do something careless, you can lose all the data on the device.

Step-by-step:

1. Turn off your smartphone.
2. Press the button combination: For most models: Volume up + Power. For POCO F3/F4: Volume down + Power.

Wipe & Reset

Wipe Network Settings

Advanced Wipe → System → Network

Confirm the action and wait for the completion.

Reboot System

On devices with a locked bootloader, a reset via Recovery can result in a factory reset.Be sure to have a backup of the data before the procedure.

Method 4: Use ADB-Teams (for advanced teams)

If you're familiar with USB debugging, you can reset your Wi-Fi settings via ADB (Android Debug Bridge), a technique that works for devices with unlocked bootloader or root rights, but works on standard MIUI firmware as well.

What you need:

• 🖥️ Computer with installed ADB-driver.
• 📱 Included debugging by USB on a smartphone (Settings) → The phone. → Version. MIUI → 7 times tap to activate the developer mode, then Settings → Additionally. → For developers → Debugging by USB).
• 🔌 USB-cable (preferably original).

Discharge commands:

adb shell settings put global wifi_on 0


adb shell settings put global wifi_on 1




adb shell pm clear com.android.providers.settings




adb reboot

These teams are consistent:

1. Wi-Fi's off.
2. They're re-energizing it.
3. Clearing the settings cache.
4. Reboot the device.

⚠️ Note: pm clear com.android.providers.settings resets all system settings, including screen brightness, sound and language settings. Use it only if other methods have failed.

💡

Before using ADB, back up your settings through Settings → System → Backup. This will allow you to quickly recover your personal data after a reset.

Method 5: Reset to factory settings (last resort)

If none of these methods work, you will have to reset your device completely, which will delete all data, including apps, photos and accounts, so only use it as a last resort.

How to do this:

1. Create a backup copy of important data (contacts, photos, documents).
2. Go to Settings → About Phone → Resetting → Delete all data.
3. Enter. PIN-Mi Account Code or Password (if linked).
4. Confirm the reset and wait for the reboot (may take up to 10 minutes).

Once reset, the device will look like new.

• 🔑 Re-enter your Mi Account (if you have been linked).
• 📶 Set up Wi-Fi and mobile network connection.
• 📲 Restore data from a backup (if it was created).

💡

Before resetting to factory settings, be sure to log out of your Mi Account in Settings → Accounts → Mi Account → Sign out. Otherwise, after reset, the device may require you to enter your previous account data (Mi Cloud protection).

What to do after resetting Wi-Fi settings

After any of the reset methods described, several steps must be taken to restore a stable connection:

1. Reboot the router. Sometimes the connection problems are not with the phone, but with the router. Turn it off power for 30 seconds, then turn it back on.
2. Update your router firmware. Outdated router software may conflict with new versions of MIUI. Check the firmware's relevance in the router's web interface (usually at 192.168.0.1 or 192.168.1.1).
3. Set up. DNS If the networks are connected but the pages are not loaded, try using public. DNS: 🌍 Google DNS: 8.8.8.8 and 8.8.4.4. 🌍 Cloudflare DNS: 1.1.1.1. and 1.0.0.1.

Check the energy saving settings.

MIUI

"WI-Fi optimization"

Settings → Battery and Performance → Optimization of Wi-Fi

If after all the manipulations Wi-Fi is still unstable, the problem may lie in the hardware (damaged Wi-Fi module) or firmware (reflashing through Fastboot is required), in this case, we recommend contacting the Xiaomi service center.

FAQ: Frequent questions about Xiaomi's Wi-Fi reset