How to distribute the Internet from Xiaomi phone to Android tablet: 3 proven ways

Are you in a situation where you urgently need to connect your tablet to the Internet, but only a Xiaomi smartphone is at hand? SIM-In this article, we will discuss all possible ways to distribute the Internet from Xiaomi devices (including models on the Internet). MIUI 12/13/14 HyperOS and any tablet running Android.

Whether you’re using Xiaomi’s flagship 14 Ultra or the budget Redmi Note 12, the algorithm will remain virtually identical.We’ll look at not only the standard method through the Wi-Fi hotspot, but also the alternatives — Bluetooth modem and the other two. USB-Connection that can be useful in low signal or limited battery life, and you'll also learn how to avoid common errors that prevent the tablet from connecting to the distribution.

Important: Before you start, check that your Xiaomi phone has mobile data enabled (if you’re handing out mobile internet) or Wi-Fi connectivity (if you’re planning to share internet from your home network), and make sure that your tablet has turned off Traffic Saving mode – it can block connections to new networks.

1. Preparation of Xiaomi phone for the distribution of the Internet

Before you set up the distribution, you need to follow several mandatory steps, which will help avoid connection problems and ensure stable operation.

The first thing you need to do is update the software on your phone. Outdated versions of MIUI or HyperOS may contain bugs that interfere with the access point's proper operation. You can check for updates in the Settings menu → About Phone → System Update.

Next, check the settings. SIM-map:

1. Go to Settings. → SIM-maps and mobile networks.
2. Choose. SIM-The card you plan to give out the internet with.
3. Make sure that the Access Point (APN) section lists your operator's correct settings. If the settings are lost, you can restore them automatically by clicking Reset APN settings.

It is also recommended to turn off energy-saving modes, as they can interrupt the Internet distribution when the screen is locked.

• 🔋 Go to Settings. → Battery and productivity.
• 🚫 Turn off Super Power Saving or Battery Saving mode.
• ⚡ Enable the option High Performance (if available).

💡

If you are giving out internet from Xiaomi phone to tablet regularly, add the Access Point shortcut to the home screen. To do this, hold your finger in the free space of the screen → Widgets → find the Access Point and drag it to a convenient place.

2. Method 1: Distribution of the Internet via Wi-Fi (access point)

This is the most popular and convenient method, as it provides high data transfer speeds and allows you to connect multiple devices at the same time. POCO and Black Shark.

To enable the access point:

1. Open the settings on your phone.
2. Go to Access Point and Modem (in some versions of MIUI – Connect and Sharing → Wi-Fi Access Point).
3. Activate the Wi-Fi Access Point slider.
4. Click on Access Point Settings to set a network name (SSID) and password. It is recommended to use a password that is at least 8 characters long with numbers and letters.

Now on the tablet:

• 📶 Open the Settings. → Wi-Fi.
• 🔍 Find the network name you have set on your phone (for example) in the list, Xiaomi_14Pro_AP).
• 🔑 Enter the password and connect.

If the tablet is not connected, try the following steps:

• 🔄 Reboot the access point on your phone (turn off and turn on again).
• 📱 Make sure that your phone is on mobile data (if you are giving away mobile internet).
• 🛠️ Check if the firewall or antivirus on the tablet blocks the new connection.

Smartphone connected to mobile network or Wi-Fi| Access point enabled on Xiaomi| Password entered correctly | Flight mode is disabled on the tablet-->

3. Method 2: Distribution of the Internet via Bluetooth

This method is less popular, but it can help if the Wi-Fi on the tablet is not working or you want to save battery power, data speeds will be lower than Wi-Fi, but it will be enough for instant messengers and easy surfing.

Instructions for setting:

1. On Xiaomi phone, open Settings → Connection and Sharing → Modem and Access Point.
2. Turn on the Bluetooth modem option.
3. On the tablet, activate Bluetooth and pair with the phone (enter the same one). PIN-code on both devices, if required).
4. After successful pairing, a notification of connection via Bluetooth modem will appear on the phone.

Features of this method:

• ⚡ Saves battery power compared to Wi-Fi.
• 🐢 Speed is lower than Wi-Fi (usually up to 10 Mbps).
• 🔗 Suitable for only one device at a time.
• 📱 Some tablets may require additional settings in the Settings menu → Networks. → Additionally. → Bluetooth modem.

Method 3: Distributing the Internet via USB (Reverse Tethering)

It's the least known, but most stable way to distribute the Internet. It's good if you have one. USB-cable (preferably original) and tablet supports OTG-The main advantage is the minimum battery consumption of the phone, since it is simultaneously charged from the tablet or adapter.

Step-by-step:

1. Connect your Xiaomi phone to your tablet using a USB cable (use a USB-C or Micro-USB port, depending on the model).
2. On the phone in the Settings menu → Connection and sharing → Modem and access point enable option USB-modem.
3. On the tablet, wait for a notification of a new network connection. In most cases, the Internet will work automatically.

If the Internet didn't come up:

• 🔌 Check that the cable is good and supports data transmission (some cheap cables are only for charging purposes).
• 📱 On the phone Xiaomi may need to allow debugging on USB (In Settings → The phone. → Version. MIUI Press 7 times, then return to the Additional Settings → For developers → Debugging by USB).
• 🖥️ On the tablet, check what is in the settings USB-the connection is selected mode of data transfer or USB-modem.

Typical problems and their solutions

Even if you set it up properly, you can have errors, and let's look at the most common ones and how to fix them.

If none of these methods worked, try resetting the network settings on your Xiaomi phone:

1. Go to Settings → Connection and Sharing → Reset network settings.
2. Confirm the reset and restart the device.
3. Repeat the Internet distribution setting.

💡

If the tablet connects to the access point but the pages don’t load, check your DNS settings. Try manually specifying Google DNS (8.8.8.8 and 8.8.4.4) in your Wi-Fi settings on the tablet.

6. How to save traffic when giving out the Internet

Phone Internet can quickly run out of mobile traffic, especially if the tablet is running background updates or streaming services. Here are some tips to avoid this:

• 📊 Use the built-in traffic counter on Xiaomi phone: Settings → SIM-maps and mobile networks → Traffic usage. You can set a limit here and get a notification when you exceed it.
• 🚫 Turn off auto-update apps on your tablet: Settings → Annexes → Auto-update of applications → Select Only via Wi-Fi.
• 🎵 Limit streaming quality: on YouTube or Netflix, set the minimum video resolution on your tablet (e.g, 480p instead 1080p).
• 🔄 Enable data saving mode in Chrome or another browser.

You can also use the “Restricted Distribution” feature available on some Xiaomi models:

1. In the Access Point and modem menu, click on Access Point Settings.
2. Activate the Data Limit option and set a maximum limit (e.g., 1 GB per day).

💡

If you often distribute Internet from your phone, consider a tariff with unlimited traffic or an increased limit for modem mode. Many operators (for example, MTS, Beeline, Tele2) offer special options for distributing Internet.

7.Security when giving out the Internet with Xiaomi

Sharing the Internet through an access point makes your phone vulnerable to unauthorized connections.

• 🔒 Use a complex password for the access point (at least 12 characters with numbers, letters and special characters).
• 🔄 Change your password regularly, especially if you are sharing the internet in public places.
• 👥 Limit the number of connected devices. In the hotspot settings on Xiaomi, you can specify the maximum number of customers (usually up to 10).
• 🛡️ Turn off the access point when it is not in use.

Also, pay attention to the network security settings:

• In the Access Point Settings menu, select the WPA3-Personal security type (if supported) or WPA2-PSK.
• Turn off the Automatic Shutdown option if it interferes with work.
• Check that the Hidden Network (SSID) mode is not enabled in the settings, which can cause connection problems on some tablets.

⚠️ Warning: Do not use open access points without a password, even for temporary distribution.This allows anyone to connect to your network and intercept traffic, including logins and passwords from sites.

8 Frequently Asked Questions