How to give away the Internet with Xiaomi Mi 9: all ways + problem solving

Xiaomi Mi 9 is still a popular smartphone thanks to its powerful hardware and flexible MIUI firmware. But many users have difficulty trying to distribute mobile Internet to other devices — especially if we are talking about older versions of software or custom firmware. In this article, we will analyze all the current ways to distribute the Internet with the Mi 9, including hidden features, bypassing carrier restrictions and solving typical errors.

It is important to understand that the Internet distribution capabilities depend not only on the smartphone model, but also on the MIUI version, regional firmware, and mobile operator policies. For example, some Russian SIM cards block the Wi-Fi Hotspot function without additional option. We tested all methods on the Mi 9 with MIUI 12.5-14 (including global and Chinese builds) and identified those that work stably.

1. Distribute Wi-Fi through the standard settings menu

The most obvious way is to use the built-in Access Point feature, but even here there are nuances: for example, on some Xiaomi firmware, this item can be hidden or work with restrictions.

Open Settings → Connections and Sharing → Access Point (on some versions of MIUI, the path may differ: Settings → Network and Internet → Access Point and modem). If there is no point, then your firmware is modified (more on this below).

• 🔄 Network name: the default smartphone model is used (for example, Xiaomi_Mi9_1234). We recommend changing it to more memorable, without Cyrillic and spaces.
• 🔒 Password: minimum length — 8 Use a combination of letters (cap and lowercase), numbers and symbols (e.g, Mi9_Hotspot!2026).
• 📶 Range: Choose 2.4GHz for better compatibility with older devices or 5GHz for higher speed (but shorter range).
• ⚡ Energy saving: Turn off the option to turn off when inactive if you want the point to work constantly.

Once you set up, tap the Wi-Fi Access Point switch. If the light comes on blue, you're done. Connect another device by selecting the network you created in the Wi-Fi list and entering the password.

Make sure that mobile internet is enabled on Mi 9|

Check the SIM card balance (some operators block the distribution when the balance is negative)|

Turn off the VPN (it may conflict with the access point) |

Reboot your smartphone if the dot is not activated the first time

-->

2. Quick distribution through the notification panel

If you need to give the Internet without digging into the settings, use the Quick Access Panel. Swipe down from top to bottom to open the notification curtain, and then again to fully open the panel. Find the Access Point icon (usually hidden behind the button). ⋮ or ⚙️).

Hold the icon Access Point 2-3 seconds, this will open the settings menu, you can quickly change the network name or password without going to the basic settings, this method is convenient if you often turn on / off the distribution.

💡

If the icons Access Point is not in the notification panel, add it manually: press ⚙️ → Change the order → Drag the icon to the active area.

Note that some Xiaomi firmwares reset user settings (network name and password return to standard) when activating the access point through the notification panel. To avoid this, always adjust the settings in advance in the main menu.

3. Internet distribution via USB (Reverse Tethering)

If Wi-Fi on Mi 9 is unstable or you want to save battery power, you can distribute the Internet through the Internet USB-This is a technique called reverse tethering, and it's useful for connecting PCs, laptops, or even some TVs:

• 🖥️ It only works on Windows (for the Linux/Mac Additional drivers will be required).
• 🔌 Requires original Xiaomi cable or certified USB-TypeC.
• ⚠️ Some operators block this method (e.g., Tele2 or Iota).

Instructions for Windows 10/11:

1. Connect the Mi 9 to your computer via USB.
2. On your smartphone, select File Transfer (MTP) (not Charging!).
3. Open the Settings. → Connections and sharing → USB-modem and activate the function.
4. On PC, check the connection: a new network device with Internet access should appear.

Important: USB-Xiaomi Mi 9 can get a lot of heat, especially if you're charging at the same time. CPU Monitor or embedded tools MIUI.

4. Internet distribution via Bluetooth

A less popular, but sometimes useful, way to do this is to distribute the Internet over Bluetooth, which is suitable for devices that don't support Wi-Fi (like some fitness bracelets or old tablets), or when you need to save battery power, speeds will be lower than Wi-Fi, but energy consumption is minimal.

Algorithm of action:

1. Turn on Bluetooth on both devices and pair.
2. On Mi 9, go to Settings → Connections and Sharing → Modem and Access Point → Bluetooth modem.
3. Activate the function and wait until the second device connects.

Limitations of the method:

• 🐢 Maximum speed - up to 3 Mbit / s (versus 50)+ Mbit/s at Wi-Fi).
• 🔋 Suitable only for the transfer of small amounts of data (messaging, mail).
• 📱 Not all devices support Bluetooth Internet access (for example, the iPhone can’t do this).

Wi-Fi access point|USB-modem|Bluetooth|I don't use the handout.-->

5. Solving Internet Distribution Problems

Even if you set it up correctly, you can have errors, and let's look at the most common ways to fix them.

If none of these methods helped, check:

• 📶 Signal quality: Mi 9 has a weak signal 4G It can cause a distribution to break. Try moving closer to the window or using a repeater.
• 🔄 Network mode: in settings SIM-maps (Settings) → SIM-maps and mobile networks → Network type: Select Only 4G (LTE) — It often solves the distribution problem.
• 🔧 Reset Network Settings: Go to Settings → System system → Resetting settings → Network resets. This will delete all stored Wi-Fi and Bluetooth connections, but can solve software failures.

💡

If the problem occurred after the MIUI update, try rolling back to the previous firmware version or install custom software (e.g., Pixel Experience).

6. Alternative methods of distribution (for advanced)

If the standard methods don't work, you can use workarounds, which require more knowledge, but sometimes they're the only solution.

Method 1: Using applications for distribution

Applications like PdaNet+ Or ClockworkMod Tether, which allows you to bypass the limitations of operators. VPN-The tunnel that distributes the Internet, and the downside is that you might have lags and unstable work. Install one of the Google Play apps, follow the instructions, and allow all the necessary permissions.

Method 2: Castom firmware

On some modified firmware (such as LineageOS or HavocOS), the distribution function works without operator restrictions. However, installing custom software requires unlocking the bootloader and may not warranty. You can find detailed instructions on the Xiaomi Mi 9 firmware in our custom firmware guide.

Method 3: ADB-team

For power users, you can turn on the distribution via ADB (Android Debug Bridge). Connect the Mi 9 to your PC, activate Debugging over USB and follow the command:

adb shell settings put global tether_dun_required 0

This command disables the operator's data check, and after the smartphone is restarted, the access point should work. MIUI.

7. Handoff Optimization: How to Increase Speed and Stability

Even if the hotspot is working, the speed can be slow and the connection unstable. Here are some tips for improvement:

• 📡 Change the Wi-Fi channel: in the access point settings (More) → Choose the manual mode and try channels 1, 6 or 11 (they are least congested).
• 🔋 Turn off background apps: programs like TikTok, YouTube, or Telegram can eat up traffic.
• 🌐 Use it. DNS Google or Cloudflare: In the Wi-Fi hotspot settings, select 8.8.8.8 and 1.1.1.1 as alternatives DNS — This will speed up the loading of sites.
• 📵 Turn on the plane mode for 10 seconds: sometimes it helps to “reset” the communication module and improve the stability of the distribution.

If you’re sharing the internet across multiple devices, keep in mind that the Xiaomi Mi 9 supports up to 8 connections at a time, but the real speed will be shared between them. For maximum performance, limit the number of connected gadgets to 2-3.

💡

For a long distribution, connect the Mi 9 to charging – this will prevent overheating and sudden shutdown due to low battery charge.

8. Security in the distribution of the Internet

Distributing Wi-Fi from your phone is convenient, but not always secure. Your smartphone becomes vulnerable to attacks if you don't take action:

• 🔐 Use a complex password: do not leave the standard 12345678 or simple combinations. It is better to generate a password through a manager (for example, Bitwarden).
• 👥 Restrict access: in the settings of the access point, you can enable filtering by MAC-Addresses to allow only authorized devices to connect.
• 🕵️ Turn off the distribution when not in use: an open access point is a good target for hackers, especially in public places.
• 🛡️ Update the firmware: in older versions MIUI There are vulnerabilities that allow you to connect to your network without a password.

Warning: If you give out internet at a cafe, airport or other public place, never use the same network to online banking or enter passwords. MITM-The attack (man-in-the-middle).

💡

For maximum security, use a VPN on a device that connects to your access point, which encrypts all traffic and protects against eavesdropping.

FAQ: Frequent questions about giving away the Internet on Xiaomi Mi 9