How to distribute the Internet from the phone Xiaomi Redmi Note 8 Pro: all ways and life hacks

Why give away the Internet with Redmi Note 8 Pro and what nuances it is important to know

Smartphone Xiaomi Redmi Note 8 Pro is one of the most popular devices of the brand, which is still actively used thanks to the powerful processor MediaTek Helio G90T and support for modern networks. to distribute the Internet from this phone can be necessary in a variety of situations, from connecting a laptop on a trip to creating a backup channel for smart devices. However, not all users know that setting up an access point on the Redmi Note 8 Pro has its own peculiarities, especially when it comes to the firmware MIUI 12-14.

In this article, we will analyze not only the standard method of activating the modem mode, but also alternative methods (through the use of the modem modem). USB We'll also solve some of the common problems, from the "Can't turn on the hotspot" error to the slow speed of the transfer. MIUI, which allow you to optimize the operation of the access point and save battery power.

If you've ever seen a phone that can't see a connected device or that it's running out of power when you're sharing the Internet, here's a proven solution. And for those who want to make the most of their Redmi Note 8 Pro, we've put together a bonus section with life hacks to enhance signal strength and increase connection stability.

Method 1: Distributing Wi-Fi through an access point (the most popular method)

It's a basic way to connect laptops, tablets and other smartphones. On the Redmi Note 8 Pro, it works consistently, but there are nuances with security settings and the network name.

To enable the access point:

1. Open Settings → Network and Internet → Access Point and modem.
2. Slip on the Wi-Fi Access Point.
3. Activate the slider at the top of the screen.
4. When you first turn on, the system will prompt you to specify a network name (SSID) and password. Use a password no shorter than 8 characters with numbers and letters - this will protect your network from unauthorized access.

By default, the Redmi Note 8 Pro distributes 2.4GHz internet, which provides better compatibility with older devices. However, if you want a faster speed, you can force the switch to 5GHz (for this, see the optimization section).

Mobile Internet is on and running stably |

Battery charge not lower than 30% (distribution strongly planted battery)|

VPN is disabled on the connected device (can block access)|

Network Name (SSID) does not contain Cyrillic or special characters (there may be connection problems)

-->

If after activation of the access point connected devices do not receive the Internet, check:

• 📶 Signal level of the mobile network - with weak coverage (1-2 divisions), the speed of distribution will be minimal.
• 🔄 Data transfer mode - in settings SIM-The cards must be selected 4G (LTE) or 5G (if supported by the operator).
• 🔒 Operator restrictions – some tariffs block the distribution of the Internet (for example, “Unlimited Internet” from Tele2).

Through Wi-Fi (access point)|

Po Po Po USB-cable|

Through Bluetooth|

I don't give you the Internet from my phone.

-->

Method 2: Distribute the Internet over USB (for PCs and laptops)

This method is useful if you need to connect a laptop or a desktop computer without a Wi-Fi adapter. USB:

• ⚡ More stable connection – no packet loss like Wi-Fi.
• 🔋 Lower battery consumption – the phone charges at the same time.
• 🛡️ Security – the connection is physically secure (a cable is needed).

Instructions for setting:

1. Connect the Redmi Note 8 Pro to your computer via the original USB-cable (preferably from the set).
2. On your phone, go to Settings → Network and Internet → Access Point and modem.
3. Activate the option. USB-modem.
4. On the computer, wait for the driver to install (usually takes 10–30 seconds).

If Windows does not recognize the device, try:

• 🔄 Reconnect the cable to another USB-port (preferably) USB 3.0).
• 🖥️ Install Mi drivers PC Suite from the official Xiaomi website.
• 🔧 Enable debugging on USB Developer settings (if not previously activated).

💡

If USB speeds are lower than Wi-Fi, check the cable – cheap non-original cords often limit bandwidth to USB 2.0 (maximum 480 Mbps).

On macOS, you may need to additionally configure network settings:

1. Open System settings → Network.
2. Select a new USB-ETHERNET connection.
3. In the TCP/IP section, set Configure: Use DHCP.

Method 3: distribute the Internet via Bluetooth (to save charge)

This method is less popular, but has its advantages:

• 🔋 Minimum battery consumption – compared to Wi-Fi savings of up to 40%.
• 📱 Suitable for Wi-Fi-free devices (such as some fitness bracelets or older printers).
• 🔒 More secure connection – paired connection reduces the risk of data interception.

How to set up:

1. Turn on Bluetooth on both devices.
2. On Redmi Note 8 Pro, go to Settings → Connection Devices → Bluetooth.
3. Find the target device in the list and perform pairing.
4. Return to Access Point and modem and activate Bluetooth modem.

Limitations of the method:

• 🐢 Low speed, maximum. ~3 Mbps (suitable only for messengers and mail).
• 📵 Limited number of devices – usually no more than 1-2 at the same time.
• 🔄 Instability – when devices are removed more than 10 meters, the connection may break.

Access Point Optimization: How to Increase Speed and Stability

Even if the hotspot is on, it can be slowed down by incorrect settings, and here are the key settings to check on the Redmi Note 8 Pro:

To change these settings:

1. Go to Settings → Wi-Fi Access Point → Adjust the access point.
2. In Network Range, select 5GHz (if your devices support it).
3. Set the channel width at 40 MHz for maximum speed.
4. Turn off the Automatic Shutdown option or set a timer for 10–30 minutes.

A critical nuance for the Redmi Note 8 Pro is that if the access point stops working after changing the settings, reset it to factory settings (Reset the access point settings in the same menu) and reconfigure it. This is due to a bug in some versions of MIUI 12-13, where manual settings conflict with automatic profiles.

💡

For maximum speed, use the combination: 5 GHz band + 40 MHz channel width + WPA2-PSK type of security.

Solving common problems in the distribution of the Internet

Even after you set it up correctly, Redmi Note 8 Pro users may encounter errors, and we will discuss the most common and ways to fix them.

Error: "I failed to turn on the access point"

Causes and solutions:

• 📵 No mobile internet – check your balance and settings APN (Path: Settings → SIM-maps and mobile networks → Access points (APN)).
• 🔧 System failure – restart your phone or reset your network settings (Settings) → System system → Reset → Resetting network settings).
• 📱 Operator restriction - some rates block the distribution. check the terms or call support.

Devices are connected, but the internet is not working.

What to do:

1. Turn off a VPN or proxy on a connected device.
2. Check if the phone is running a traffic saving mode (Settings → Network and Internet → Data Use).
3. Update the phone’s firmware – older versions of MIUI had traffic routing bugs.

The access point is permanently off.

Possible causes:

• 🔋 Saving Charge – Turn off the Auto-Disable option in the access point settings.
• 📡 Weak network signal – the phone can turn off the distribution if you lose communication with the tower.
• 🔄 Conflict with other features – try turning off Wi-Fi Direct or NFC.

💡

If the hotspot is unstable, try changing the Wi-Fi region in the developer settings (Settings → About Phone → 5 times tap on MIUI → For developers → Wi-Fi Region). Select Europe or the United States instead of automatically determining.

Hidden MIUI features for advanced users

Redmi Note 8 Pro has hidden settings that allow you to fine-tune the access point, and you need to activate the developer mode to access them:

1. Go to Settings. → The phone.
2. Tap 5-7 times on the MIUI version until the notification “You became a developer!” appears.
3. Go back to the main settings menu and open a new section for developers.

Useful options for the access point:

• 📶 Enforcement of use 4G — Mobile network → Type of network → Only LTE (stability).
• 🔄 Turning off automatic switching to 3G — Mobile network → Switch to 3G/2G → Disconnected.
• 🔋 Background activity restriction – Background processes restriction → Standard Limitation (reduces processor load).

For power users, if you give out the Internet often, you can set the access point to automatically turn on when you connect to a charger.

1. Install the Tasker or MacroDroid app from the Play Market.
2. Create a macro with the condition "Device connected to charging" and the action "Enable access point".
3. Set up exceptions for night time so as not to discharge the phone in vain.

FAQ: Answers to Frequent Questions