How to view all connected devices to Wi-Fi on Xiaomi Redmi phone: from standard settings to hidden features

Have you ever noticed that the Internet on your Xiaomi Redmi suddenly starts to slow down, even though the tariff has not changed and the router is stable? One possible reason is unnecessary devices connected to your Wi-Fi network without your knowledge. This can be neighbors' gadgets that picked up your signal, old phones that you haven't used in a long time, or even smart light bulbs left on the network after moving.

In this article, we will analyze all the available ways to view the list of devices in your Wi-Fi network directly from the Xiaomi Redmi phone – from standard features. MIUI You'll learn how to distinguish your device from someone else's, how to block unwanted "guests" and why some gadgets may not appear in the list. 10/11/12, Redmi 9/10/13 and other smartphones MIUI 12–14.

1. Standard method: via Wi-Fi settings in MIUI

The easiest method is to use the built-in MIUI tools. It doesn't require any additional apps to be installed and works on all Xiaomi Redmi smartphones with current firmware versions. However, there's a limitation to this method: it only shows the devices connected to your phone as an access point, not a router. If you need to see gadgets sitting on your home Wi-Fi, move on to the next section.

To check devices connected to your Redmi mobile hotspot:

1. Open Settings (the gear icon on the main screen).
2. Go to the section Network and Internet → Access Point and modem.
3. Slip on the mobile hotspot.
4. At the bottom of the screen will appear the block Connected devices with a list of gadgets, their MAC-addresses and connection times.

If the list is empty, no one is connected to your hotspot. To see devices on your home Wi-Fi, read on.

💡

If an unknown device appears on the list but you are not giving away the internet, it could be a sign that someone has connected to your phone via Bluetooth or other devices. USB-Check the settings of modem modem in the same section.

2. Viewing devices on the router through the web interface (the most reliable way)

If you need to see all the devices connected to your home Wi-Fi (including TVs, laptops, and smart speakers), the best way to do this is to go to your router settings. This works regardless of your Xiaomi Redmi model, since the data is taken directly from the router. Most modern routers (including Xiaomi Mi Router, TP-Link, ASUS) support this feature.

Step instructions:

1. Find out. IP-The address of your router is usually 192.168.0.1, 192.168.1.1 or 192.168.31.1 (for Xiaomi routers.
2. Open your browser on Redmi (like Google Chrome or Mi Browser) and type that address into the address bar.
3. Enter the login and password (often admin/admin or admin/password from the sticker by default).
4. Find Wireless Network (Wi-Fi), Devices, or DHCP (the name depends on the router model).
5. Open the Customer List tab, Connected Devices or similar.

In the table you will see:

• 📱 Device names (if configured correctly).
• 🔢 MAC-addresses (unique identifiers).
• 🌐 IP-addresses assigned by the router.
• ⏱️ Time to connect.

If you use the Xiaomi Mi Router router, the path is: Settings → Local Network → Devices. Here you can not only view the list, but also block unknown gadgets by clicking on three dots next to the name.

3. applications for Wi-Fi network analysis: Fing, NetScan and others

If you're not comfortable accessing your router's settings (e.g., you don't have access to an admin panel or you're on a guest network), you can use third-party apps that scan the network and show all connected devices, including those that don't show up in the standard settings.

Top.-3 Applications for Xiaomi Redmi:

How to use Fing (as in the example of Redmi Note 11):

1. Install the app from Google Play.
2. Open it and press Scan.
3. In 10-20 seconds, you will see a list of devices with the indication: 🔤 Names (if configured). 🏭 Manufacturer (by MAC-address). 📡 Type of connection (Wi-Fi, Ethernet).

Slip around the device to see additional information (such as open ports).

⚠️ Note: Some apps (like Fing) require location permission to scan the network.This is due to Android 10 restrictions+ — without geodata, applications cannot perform network analysis, and disabling this permission will result in a scan error.

4. How to identify an “alien” device in the network: signs and actions

You found an unknown gadget on the list - what to do? Before you block it, make sure it's not your own device (like an old smartphone or a smart speaker).

• 🤖 Unknown name (e.g., name, android-123456 or esp_abcdef).
• ⏳ Connected around the clock (unless it’s your PC or TV).
• 📡 MAC-The address does not match any of your gadgets (check the stickers on the devices).
• 🔍 The manufacturer is unfamiliar (e.g. Xiaomi, Samsung or Apple is yours, and the Espressif is perhaps the smart bulb of the neighbor).

If you are sure that the device is foreign, act as follows:

1. Change your Wi-Fi password (the most reliable way to do this). Go to the router settings (see section 2) and update your password in Wireless → Security.
2. Block it. MAC-Address (if the router supports this feature) In Xiaomi Mi Router, this is done in Settings → Local area network → Filter MAC.
3. Enable the function "Hidden network» (SSID This will not protect you from experienced hackers, but will reduce the number of accidental connections.

⚠️ WARNING: If a device named xiaomi-device-XXXX appeared on your network, but you didn't buy new Xiaomi gadgets, this could be a sign that someone is trying to connect to your network via Mi Home or smart devices.

5 Hidden Devices: Why They Are Not Seen and How to Find Them

Sometimes even after scanning the network, some devices don't show up, and this can happen for several reasons:

• 🔌 Ethernet connection – these devices are not always visible in the Wi-Fi list.
• 🛡️ Invisible mode function – some gadgets (such as smart speakers) hide their presence.
• ⏳ Sleeping mode – the device is connected but not active.
• 🔄 Another Wi-Fi range – if the router operates in two bands (2.4 GHz and 5 GHz), devices can be “separated».

To find these gadgets:

1. Check both Wi-Fi ranges (if dual-band router).
2. Use the NetScan app with the Deep Scan option enabled.
3. Look in. DHCP-Customers in router settings – there may be devices that don’t appear in the main list.

Check both Wi-Fi bands (2.4GHz and 5GHz)

Use an application with Deep Scan (like NetScan)

Look at the section. DHCP-router

Check your connected devices over Ethernet (if any)

Update the router’s firmware (sometimes bugs hide devices)-->

If you use a mesh system (e.g. Xiaomi Mesh), devices can jump between nodes, making them harder to track, in which case, check the customer list at each node separately.

6. How to track connected devices automatically

If you need to monitor your network constantly (e.g. in an office or a large house), manual checks will become tedious, and automatic tracking will help:

• 📊 Router settings – many models, including Xiaomi Mi Router 4A/AC/Pro) Allows you to include notifications about new devices.
• 🤖 Mi WiFi app – if you have a Xiaomi router, install the official app and enable Network Monitoring option.

For Xiaomi routers:

1. Open the Mi WiFi app.
2. Go to the Devices. → Network settings.
3. Enable the option to Notify about new devices.
4. Set up notifications to come to your Xiaomi Redmi.

If you have a router from another manufacturer, look for similar features in its proprietary app (such as TP-Link Tether or ASUS Router).

💡

Automated network monitoring will help you spot suspicious connections in time, but it does not replace regular manual checks – some devices may go undetected.

7. Frequent mistakes and how to avoid them

When checking devices on Wi-Fi networks, Xiaomi Redmi users often face typical problems.

If none of these methods worked, try restarting your router – sometimes the list of devices is not updated due to a malfunction. DHCP-server.

FAQ: Answers to popular questions