Connecting the JBL column to the Xiaomi phone via Bluetooth: instruction and problem solving

JBL wireless speakers and Xiaomi smartphones (including the Redmi and POCO lines) are ideally compatible for listening to wireless music. However, even with modern devices, users face difficulties in the first pairing: the speaker is not on the list of available devices, the connection is interrupted or the sound is transmitted with a delay. This article will help you understand how to properly connect JBL to Xiaomi over Bluetooth, avoid typical errors and configure the connection for stable operation.

We'll look at not only the basic connection procedure, but also the nuances for different speakers (JBL Charge 5, Flip 6, Go 3, etc.), the features of MIUI 14/15 firmware, and how to fix common problems. If you've tried to connect devices but failed, there's a section on diagnosing problems and solving them.

Preparation of devices before connection

Before pairing, make sure both devices are ready to connect, which will save you most of the trouble in the column search phase.

For Xiaomi (including Redmi Note 12, POCO X5, etc.):

• 📱 Enable Bluetooth in the Quick Settings Panel or through Settings → Connections → Bluetooth.
• 🔄 Update the firmware to the latest version MIUI (essential for connection stability).
• 🚫 Close applications that actively use Bluetooth (such as fitness trackers or wireless headphones).

For the JBL column:

• 🔋 Charge the column to at least 30% (charge indicator should burn or blink).
• 🔊 Put it in pairing mode: press the Bluetooth (or Power) button for 3-5 seconds until the blue/white indicator flashes.
• 📍 Place the column at a distance of no more than 1 meter from the phone (for the first connection).

💡

If the JBL light flashes red, the column is discharged, and connect it to charge for 10 to 15 minutes before you try pairing.

On some JBL models (like Charge 4 or Xtreme 3), you need to hold the Volume+ and Bluetooth buttons simultaneously for 10 seconds to reset previous connections.

Step-by-step: how to connect JBL to Xiaomi

Follow this algorithm for successful pairing. The instruction is relevant for all Xiaomi smartphones on MIUI 12-15 and JBL speakers (except models that only support JBL Connect+, which require a separate application).

1. Activate Bluetooth on Xiaomi: swipe from top to bottom across the screen and tap the Bluetooth icon (or go to Settings → Bluetooth).
2. Start a Device Search: Click Device Search (in some versions of MIUI, search starts automatically).
3. Select your column: the name of the JBL model (e.g., JBL Flip 6) will appear in the list of devices found.
4. Confirm pairing: On the phone screen and (sometimes) on the column will appear a request for connection.
5. Check the connection: turn on the music - the sound should be transmitted to the speaker. The indicator on JBL will stop flashing and will burn with even light.

Bluetooth enabled on Xiaomi

JBL column in pairing mode (blinks blue)

Distance between devices ≤ 1 m

Other Bluetooth applications are closed

-->

If the speaker doesn’t appear in the device list, try turning off and re-enable Bluetooth on your phone, then restart the column (hold the Power button for 10 seconds).

Features of connection for different JBL models

Not all JBL speakers connect the same way. Below are the key differences for the popular series.

Models with JBL Connect+ support (such as the JBL Pulse 4) may require the installation of the official JBL Portable app from Google Play, which allows you to control the equalizer and synchronize multiple speakers.

JBL Flip 5/6

JBL Charge 4/5

JBL Go 3/4

JBL Xtreme 3

Another model-->

Problem Solving: JBL column doesn't connect to Xiaomi

If the pairing fails, check the following points:

⚠️ Note: Some Xiaomi smartphones (e.g. Redmi) 9A) The built-in Bluetooth module has a limit on the number of devices saved (maximum 8). If the list is filled, delete unnecessary devices through Settings → Bluetooth → ⚙️ (setting) → Remove the device.

Common mistakes and ways to eliminate them:

• 🔴 Column not: restart both devices, check the charge JBL And the distance to the phone. MIUI 13+ Try to disable Visibility for neighboring devices in Bluetooth settings.
• 🔄 Connection is interrupted: Turn off charge saving for Bluetooth in Settings → Battery → Selection of applications. Also check if the connection is blocked by antivirus (for example, Mi Security).
• 🎵 The sound comes from the phone, not from the speaker: in the notification bar, click on the Bluetooth icon and select JBL sound-out.
• 🔊 Low audio quality: In your Bluetooth phone settings, enable the option High-quality audio codec (available on the phone) MIUI 14+ support-model AAC or).

If the problem persists, reset your Bluetooth settings to Xiaomi:

1. Go to Settings → System → Resetting of settings → Resetting of network settings.
2. Confirm the action (this will remove all stored Wi-Fi and Bluetooth devices).
3. Reboot the phone and repeat the pairing.

Optimizing the connection for stable sound

Even after a successful connection, users sometimes experience delays (lags) or interference, and here's how to improve the quality of the transmission:

Settings on Xiaomi:

• 📶 Enable Adaptive Bluetooth (available on the MIUI 14+ In Settings → Connections → Bluetooth → This feature automatically switches the codec for better sound.
• 🔋 Turn off battery optimization for Bluetooth: Settings → Battery → Choice of applications → Bluetooth → No restrictions.
• 🎧 In sound settings (Settings) → Sound) select High Quality for wireless devices.

Settings on the JBL column:

• 🔊 For supported models JBL Portable App Set a Balance or Bass Sound Profile+ (depending on preference).
• 📱 If the column is used outdoor, activate Outdoor mode (if any) to amplify the signal.

To minimize the lag when watching the video:

• 🎥 Use applications that support sound synchronization (for example, VLC or MX Player where you can manually adjust the delay.
• 📶 Make sure there are no physical barriers between the phone and the speaker (walls, metal objects).

💡

For JBL Charge 5 and later, it is recommended to update the column firmware through the JBL Portable app.This fixes compatibility errors with MIUI 14/15.

How to connect multiple JBL speakers to one Xiaomi

If you have two or more JBL speakers that support PartyBoost or Connect+, you can sync them for stereo or volume up. Here's how to do this:

For PartyBoost (JBL Flip 6, Charge 5 and later):

1. Connect the first column to Xiaomi as described above.
2. Turn on the second column and press the PartyBoost button for 3 seconds.
3. On the first column, also click PartyBoost. Columns sync (blink orange).
4. The sound will be played simultaneously on both speakers.

For Connect+ (older models like the JBL Flip 4):

1. Install the JBL Connect app from Google Play.
2. Connect the first column to the phone.
3. In the app, click Connect+ and select the second column from the list.
4. Select Stereo (left/right channel) or Party (same sound) mode.

⚠️ Attention: When synchronizing multiple speakers, the battery is consumed 1.5-2 times faster.

Frequent Questions and Answers (FAQ)