Xiaomi Connection to Wireless Display: All Ways and Problem Solutions

Wireless screen broadcasting from Xiaomi devices to a TV or monitor opens up new possibilities for viewing content, games and presentations. However, many users face difficulties when connecting for the first time: the TV does not see the smartphone, the image slows down, the sound disappears. In this article, we will discuss all the current ways of connecting, from standard Miracast to alternative protocols, and provide specific recommendations for eliminating typical errors.

It’s important to understand that wireless screen technology doesn’t just depend on Xiaomi’s model (be it the Redmi Note 12, POCO F5 Or Mi 13 Ultra), but also from the capabilities of the receiving device. TV (series A2, Q2, S Pros support all the necessary protocols out of the box, whereas older models or third-party brands may require additional hardware.We will look at options for all scenarios, from simple screen duplication to low-latency broadcasting for games.

1.What wireless broadcasting technologies Xiaomi supports

Xiaomi devices based on MIUI (Version 12 and later) supports three major wireless screen protocols:

• 📡 Miracast is the standard protocol for Wi-Fi Direct screen duplication, and works on most modern TVs without any adapters. 4K@30Hz, but may suffer from delays.
• 🍎 AirPlay is a protocol from Apple, but Xiaomi has added support for it in the latest versions MIUI Compatibility with Apple TV TVs that support AirPlay 2 (for example, LG OLED Samsung QLED 2022+).
• 🔗 Wi-Fi Direct + DLNA — It is used to transfer media files (photos, videos, music) without dubbing the whole screen, suitable for watching movies, but not for games or working with applications.

In addition, some Xiaomi models (such as the Mi 11 and newer) support the proprietary Mi Screen Cast protocol, optimized for working with Xiaomi TVs.It provides a more stable connection and lower latency compared to Miracast.

The choice of protocol depends on your tasks:

Important: If your TV is older than 2018, it is likely that it does not support Miracast or AirPlay at the hardware level. TV Stick or Google Chromecast).

2. Preparation of devices before connection

Before trying to pair Xiaomi with a wireless display, follow a few must-do steps:

Make sure that the TV and smartphone are connected to the same Wi-Fi network (for example, to the Internet). DLNA/AirPlay)

Update MIUI to the latest version (path: Settings → About Phone → System Update)

Turn off VPN and energy saving modes

Check that the TV is on signal reception mode (usually called Screen Mirroring or Miracast)

Close background applications that consume Internet traffic (torrents, cloud synchronizations)-->

Pay special attention to the version MIUI. Older builds (below 12.5) may not have drivers for wireless broadcasting, such as the Redmi Note 9 with the MIUI 11 users often encountered the error "Can not connect to the display" - the problem was solved by updating to the screen MIUI 12.5+.

Also check the regional settings of the TV.Some Xiaomi models TV, The Miracasts sold in China have restrictions on the use of Miracast outside the region:

1. Go to the TV settings → Account and security → Region.
2. Choose Russia or Europe (not China!).
3. Reboot the TV.

💡

If your TV doesn’t support Miracast, you can HDMI-Port, use the Xiaomi Mi adapter TV Stick (around 3000)₽). It converts any TV into a “smart” TV with support for all broadcast protocols.

3. Miracast connection: step-by-step instructions

Miracast is the most versatile method that works on most devices. MIUI 12-14 TVs with Wi-Fi Direct support.

Steps for connection:

1. On the TV, activate the signal reception mode: For Xiaomi TV: Settings → Connection and sharing → Wireless display → Turn on "Allow Connection." For Samsung:Source → Screen Mirroring. LG: Settings → Network → Miracast.

Xiaomi

Settings → Connection and Sharing → Wireless Display

"Screen Translation"

"Update"

Confirm the connection on the TV (entry may be required) PIN-code).

If the connection does not occur, try:

• 🔄 Reboot both devices.
• 📶 Switch Wi-Fi on TV and Smartphone to 5GHz Channel (less interference).
• 🔧 Reset network settings on your smartphone: Settings → Wi-Fi → Additionally. → Resetting settings.

4. Connect via AirPlay (for Apple) TV and compatible television sets)

While AirPlay is a protocol from Apple, Xiaomi has added support for it. MIUI 13+ It's really good for compatibility with the Apple ecosystem, and that's true if you have a TV. LG, Samsung or Sony with AirPlay 2 or Apple TV 4K.

Instructions:

1. Make sure your TV and smartphone are connected to the same Wi-Fi network (required to be 2.4GHz or 5GHz, but not a guest network!).
2. On the TV, turn on AirPlay mode: For LG: Settings → General. → Apple AirPlay → For Samsung: Settings → General. → Apple AirPlay → Turn on.

Xiaomi

Settings → Connection and Sharing → Screen Broadcast

Apple

Confirm the connection on the TV (a code of 4 digits may appear).

Limitations of AirPlay on Xiaomi:

• 🎮 Touch-controlled games are not supported (screen is duplicated, but no tacis are transmitted).
• 🔊 The sound is only transmitted in stereo (no Dolby Atmos or 5.1 support).
• 📶 The delay is ~80 ms, which is noticeable when watching videos with subtitles.

💡

AirPlay on Xiaomi only works for screen broadcasting, but does not fully support screen mirroring, for example, will not display notifications and system menus.

5. Optimization of broadcast quality: how to remove lags and brakes

A common problem with wireless broadcasting is image delays (lag) and artifacts (blurring, squares), which are related to Wi-Fi bandwidth limitations and video encoding. Here's how to improve quality:

Settings on the smartphone:

• 📉 Reduce the broadcast resolution: Go to Settings → Wireless display → Image quality. Choose. 720p or 1080p instead 4K (This will reduce the load on the network).
• 🔋 Turn off the power saving mode: Settings → Battery → Performance mode.
• 🎯 Enable Game Mode (if you are streaming gameplay): Settings → Special facilities → Game mode.

Router settings:

• 📶 Switch to 5 GHz band (less loaded than 2.4 GHz).
• 🔗 Enable QoS (Quality of Service) in your router settings and set the maximum priority for MAC-smartphone-address.
• 🚫 Disable devices that consume traffic (IP-cameras, torrents).

For Xiaomi. TV additionally:

• 🔧 Enable "Low Delay Mode": Settings → Image: → Game mode.
• 🔄 Update your TV firmware to the latest version (path: Settings) → On TV. → Update of the PO).

💡

If you play mobile games (such as Genshin Impact or Call of Duty Mobile), use the branded Mi Screen Cast instead of Miracast. Latency is reduced from 100 ms to 30-40 ms, which is critical for shooters.

6. Solving common connection errors

Even with the right setup, errors can occur, and we will discuss the most common and ways to fix them:

If none of these methods worked, try alternative broadcasting apps:

• 📱 ApowerMirror – supports Miracast and works even on older versions of Android.
• 🖥️ TeamViewer QuickSupport - for remote control (no screen duplication!).
• 🎮 Steam Link – optimized for PC gaming, but works with mobile games.

7.Alternative ways of connecting: when wireless protocols do not work

If wireless broadcasting is not possible due to hardware limitations, consider alternatives:

1. Connection by HDMI adapter

For modern smartphones Xiaomi (with a port) USB-C) adapter USB-C to HDMI. For example:

• 🔌 Xiaomi USB-C Multiport Adapter (~2500₽) — supportive 4K@60Hz and charging at the same time.
• 🔌 Baseus USB-C to HDMI (~1500₽) — budgetary option 1080p.

Advantages: zero latency, support HDR Disadvantages: wires, you can't use your smartphone while broadcasting.

2.Use of Google Chromecast

Google Chromecast device (or its Xiaomi Mi analogue) TV Stick allows you to stream the screen through the Google Home app:

1. Connect Chromecast to HDMI-television-port.
2. Install the Google Home app on your smartphone.
3. In the app, select your Chromecast and click on “Translate screen”.

Permits are maintained until 1080p@60Hz, but with a delay ~100 miss.

3. DLNA media-file

If you only need to transfer video/photos, and not duplicate the screen, use the DLNA:

1. Turn it on on the TV. DLNA-server (usually in the "Network" or "Multimedia" section").
2. On your smartphone, install the BubbleUPnP or LocalCast app.
3. Select a file to broadcast and specify the TV as the output device.

💡

adapter USB-C to HDMI — The only way to stream a screen from Xiaomi to a TV without lags for games and videos in the highest quality.

8. Connection Methods Comparison: What to Choose for Your Tasks

The choice of the connection method depends on your purpose:

For most Xiaomi users, the best solution is:

• 🎬 For video, Miracast (if the TV supports) or DLNA.
• 🎮 For games — USB-C to HDMI Mi Screen Cast (on Xiaomi) TV).
• 🖥️ For work - Miracast with quality settings on 1080p.

FAQ: Frequent questions about connecting Xiaomi to a wireless display