How to connect Xiaomi headphones over Bluetooth: instructions for all models (2026)

Xiaomi wireless headphones are some of the most popular accessories due to the combination of price, sound quality and convenience. However, even with such devices, users often have difficulties when connecting for the first time: the smartphone does not see the headphones, the sound is interrupted, one ear does not work. In this article, we will analyze all possible ways to connect Xiaomi headphones over Bluetooth, from the basic models of Redmi AirDots to the flagship Xiaomi Buds 4 Pro, and also solve typical problems that may arise in the process.

It’s important to understand that the connection algorithm may vary slightly depending on the headphone model and the version of your device’s operating system.+ iOS 16+ There are some nuances to Bluetooth settings that many people don't know about, and we'll look at universal methods, and we'll also give you recommendations for specific scenarios, like connecting to Windows, MacOS, or even Smart. TV Bluetooth 5.0 support.

If you've tried to plug in your headphones and you've encountered a mistake, don't rush them to factory settings. 90 percent of the time, the problem is solved by simple steps, which we'll describe below. And for those of you who've just unpacked the new Xiaomi pair, we've prepared a step-by-step checklist of keynote illustrations.

1. Preparing Xiaomi headphones for connection

Before you start syncing, make sure your Xiaomi headphones are ready to go. Many users miss this stage, which causes problems with finding a device or maintaining a connection.

🔋 Charge your headphones and case. Even if the indicator shows a charge, connect the case to the network for 10-15 minutes. 3T Pro) require a minimum charge level to activate the pairing mode.
📦 Remove the headphones from the case. Most Xiaomi models only automatically turn on after both earphones are removed. Except for Redmi AirDots 3 Pro, which can be turned on separately.
🔄 Reset previous connections (if the headphones have already been used). To do this, press and hold the touchpad on both headphones for 10-15 seconds until the indicator flashes red and white.

Pay special attention to the status indicators. Most Xiaomi models have them on the case or directly on the headphones:

🟢 Green/Blue – Headphones are on and ready to connect.
🔴 Red: Low charge or pairing error.
🟢🔴 Alternate flashing - mode of pairing (pairing mode).

If the indicator doesn't respond to your actions, try rebooting the case: plug it into charging for 30 seconds, then turn off and remove the headphones. This often helps when the Bluetooth module freezes.

💡

If Xiaomi headphones do not respond to pressing, check if moisture has entered the touch panels. wipe them with a dry wipe and let them dry for 10-15 minutes.

2. Step-by-step instruction: how to connect Xiaomi headphones to a smartphone

Consider the universal connectivity algorithm that is suitable for most Xiaomi models (including Redmi AirDots, Mi True Wireless Earphones, Xiaomi Buds, etc.) The instruction is relevant for Android and iOS devices, but with slight differences.

For Android (MIUI, Stock Android, Samsung One UI etc.)

Open Settings → Bluetooth on your smartphone and activate the module.
Remove the headphones from the case. They should automatically turn on and go into pairing mode (the indicator flashes white and red).
In the list of available devices, find the name of your model (for example, "Redmi AirDots"). 3 Pro_L" Or "Mi True Wireless Earphones." 2"). Press it.
Confirm Connection. Some Xiaomi models may require additional confirmation on the headphones themselves (double touch touch touch).

If the headphones don’t appear in the list, try:

🔄 Reboot Bluetooth on your smartphone (disable/enable module).
📱 Update the firmware of the headphones through the Mi Home or Xiaomi Earphones app (available on Google Play).
🔌 Connect the headphones to another device (such as a tablet) to check their performance.

For iPhone (iOS 15 and newer)

On the iPhone, the algorithm is almost identical, but there are nuances:

Go to Settings → Bluetooth and turn on the module.
Press and hold the button on the case (if any) or touchpad on the headphones for 5 seconds until the indicator starts flashing white.
In the list of devices, select your model. On iOS, the name can be displayed without suffixes ( L or R).
Wait for the sign "Connected" to appear on the iPhone may additionally appear notification about the connection of the accessory.

Important: On iPhone, Xiaomi headphones may not support some of the features available on Android (such as firmware via Mi Home or advanced audio settings).

Remove both earphones from the case|Turn on Bluetooth on your smartphone|Make sure the indicator flashes white/red|Update the headphone firmware (if available)|Try to connect from another device (if errors occur)

-->

3. Connection to a computer (Windows) 10/11, MacOS)

If you want to use Xiaomi headphones with a PC or laptop, the algorithm will be a little different. The main difficulty here is possible problems with drivers or Bluetooth codec, especially on Windows.

For Windows 10/11

Press Win + I, select Devices → Bluetooth and other devices.
Activate Bluetooth and press Add Device → Bluetooth.
Remove the headphones from the case and hold the touchpad on both headphones until the indicator blinks.
In the list, find your model (e.g., Xiaomi Mi True Wireless Earphones 2) and select it.

If the headphones are connected but the sound is interrupted or absent:

🔊 Check the codec: go to the Control Panel → Sound. → Properties of the device and select AAC or SBC (Not aptX, because Xiaomi doesn’t support it).
🔄 Update your Bluetooth driver: Download the latest version from your adapter manufacturer’s website (like Qualcomm or Intel).
🛠️ Turn off power saving for Bluetooth adapter in Device Manager.

For macOS

On a MacBook or iMac, the connection is easier:

Open System settings → Bluetooth.
Hold the button on the case (if any) or touch panel on the headphones until the pairing mode is activated.
On a MacOS, you can select your model, and the name can appear as "Unknown Device" -- that's OK.

If the sound is distorted, try:

🎧 Reset the sound settings: go to Audio-MIDI-Configurement (through Programs) → Utilities) and reset the configuration.
🔄 Reconnect the headphones, previously removing them from the list of devices.

4. Solving common connection problems

Even if you do the instructions correctly, you can get errors, and let's look at the most common ones and how to fix them.

Problem.	Possible cause	Decision
Headphones are not displayed in the list of devices	Inactive pairing mode, low charge, conflict with other devices	Reset your headphones (hold the sensor for 15 seconds), charge the case, turn off other Bluetooth devices
Only one headphone is connected.	Failure of synchronization between headphones, different level of charge	Return both headphones to the case, retrieve them, reset the settings
The sound is interrupted or distorted	Interference from other devices, incompatible codec, weak signal	Switch the codec to SBC, Turn off 2.4GHz Wi-Fi, get close to the signal source
The headphones are plugged in, but there's no sound.	Not selected the correct sound source, driver failure	Check the sound settings on the device, reconnect the headphones, update the firmware

If none of these things worked, try updating your headphone firmware.

Install the Xiaomi Earphones app (for Android) or Mi Home.
Connect the headphones to your smartphone.
Open the app, select your model and check for updates.

Critical information: Firmware through unofficial sources can lead to loss of functionality of the headphones. Use only official Xiaomi applications.

What if Xiaomi headphones are not defined by any device?

If the headphones do not respond to reset and are not detected even after charging, the problem may be a hardware failure of the Bluetooth controller.In this case: 1. Try connecting the headphones to another case (if the model supports a replacement). 2. Check the charging contacts in the case - they could oxidize. 3. Contact the Xiaomi service center with a check for the purchase (warranty is usually 12 months).

5. Customization of sound and additional functions

Once successfully connected, it is recommended to adjust the sound and headphone control for maximum comfort. Depending on the model, Xiaomi has several useful features:

🎵 Equalizer: in the Xiaomi Earphones application, you can choose pre-settings (bass, vocals, classics) or create your profile.
🔇 Noise reduction: available on Xiaomi Buds 3 Pro and later. Included in the app settings.
🎧 Monosound: useful for people with hearing impairments. Activated in Settings → Special facilities → Audio settings.
🔄 Autoconnect: Headphones will automatically connect to the latest device when removed from the case.

For touch-controlled models (e.g. Redmi AirDots 3 Pro), you can reassign actions to:

👆 One touch: playback/pause.
👆👆 Double touch: the next track (by default).
👆👆👆 Triple touch: Calling the voice assistant.
👇 Long-term retention: Turning off noise reduction (if supported).

To change the purpose of the gestures:

Open the Xiaomi Earphones app.
Choose your headphone model.
Go to the Touch Management section.
Set the right actions for each gesture.

💡

On Xiaomi Buds 4 Pro and later, spatial audio is available (for movies and games). To activate it, you need to enable the function in the application settings and use a compatible device (for example, Xiaomi 13 Pro or iPhone 12).+).

6 Connecting to other devices (Smart) TV, game console)

Xiaomi headphones can be connected not only to smartphones and computers, but also to Smart TV, PlayStation, Nintendo Switch and even some fitness bracelets.

Connect to Smart TV (Android TV, Tizen, webOS)

Most modern smarts TV (For example, Xiaomi Mi TV, Samsung QLED, LG OLED) Bluetooth support, but the connection algorithm may be different:

Open the settings of the TV and find the Network section → Bluetooth (or Sound) → Output devices).
Activate device search.
Transfer the headphones to pairing mode (hold the touch panel).
Select your model in the list.

If the TV doesn't find the headphones:

🔌 Check if yours is supported. TV Bluetooth. Some budget models (e.g. Xiaomi Mi) TV 4A) require an external adapter.
🔄 Update the TV firmware. There may be compatibility errors on older versions.
🎧 Use a Bluetooth transmitter (such as an Avantek) if the TV doesn’t have a built-in module.

Connection to PlayStation 5 or Nintendo Switch

With game consoles, the situation is more complicated:

🎮 PlayStation 5: officially supports only a limited list of headphones. Xiaomi will need a Bluetooth adapter to connect (for example, for example, the device is not available, 8BitDo), plugged USB-consoleport.
🃏 Nintendo Switch: Bluetooth is only supported on models OLED (2021 and later. Older versions need an adapter.

For PlayStation 4, the algorithm is as follows:

Go to Settings → Devices → Bluetooth devices.
Choose your headphone model (if it is displayed).
If the headphones are not visible, use a Bluetooth transmitter connected to the headphone. USB-port.

💡

To connect Xiaomi headphones to the PlayStation 5 without an adapter, you can use the application PS Remote Play on a smartphone.The sound will be transmitted via the phone, but there will be a delay (~100 ms).

7. How to Disable and Reset Xiaomi Headphones

If you want to connect your headphones to another device or they start to work incorrectly, you may need to reset. Here's how to do it correctly:

Disconnect from the current device

To simply turn off the headphones (without deleting from memory):

📱 Nana Android/iOS: Go to Settings. → Bluetooth, find your headphones and click Disable.
💻 Nana Windows/MacOS: Right-click on the device in the Bluetooth list and select Disable.

The headphones will automatically turn off after 5-10 minutes of inactivity (if not in the case).

Reset to factory settings

For complete reset (removal of all associated devices):

Put both earbuds in the case.
Open the case lid.
Press and hold the touchpad on both headphones for 15-20 seconds until the indicator flashes red and white.
Close the case cover and remove the headphones – they are ready for a new connection.

Some models (e.g. Xiaomi Buds) 3T Pro) discharge is carried out through an annex:

Open Xiaomi Earphones.
Choose your model.
Go to Settings → Reset settings.

Attention! After resetting, all personal settings (e.g., equalizer or gestures) will be deleted.

8. Frequently Asked Questions (FAQ)

Can you connect Xiaomi headphones to multiple devices at the same time?

Most Xiaomi models (except for the Xiaomi Buds 4 Pro and later) do not support multi-point (simultaneous connection to two devices).However, you can manually switch between devices, disabling the headphones from one and connecting to another. On the Buds 4 Pro, the multi-point is activated in the settings of the Xiaomi Earphones app.

Why are Xiaomi headphones running out quickly?

The reasons may be different: 🔋 Battery wear (if headphones are more than 2-3 years old). 🎵 Use of noise reduction (increases consumption by 20-30%). 📶 Weak Bluetooth signal (earphones spend energy on finding the device). 🔄 Frequent connections/disconnections (e.g. when using a multi-dot) To extend your running time: Turn off noise cancellation if you don't need it. Store your headphones in a case (they charge even when your Bluetooth is off on your phone). Update your firmware via Mi Home.

How to check the originality of Xiaomi headphones?

Xiaomi fakes often have connectivity and sound issues. To check the originality: Check the serial number on the case and headphones - it must match. Download the Xiaomi Earphones app and try updating the firmware. Counterfeits won't. Pay attention to the sound quality: Original headphones have balanced high and low frequencies, whereas fakes often have bass wheezing. QR-code that leads to the official website of Xiaomi.

What to do if one Xiaomi headphone does not work?

If one earbud doesn't connect or make a sound: Check if the problem earbud is charged (put it in the case for 10 minutes); Reset (hold the touchpad on both earbuds for 15 seconds); Clear the contacts in the case and on the headphones (use a cotton swab dipped with alcohol); try connecting the headphones to another device to rule out a smartphone problem; if nothing works, contact the service center — there may be a malfunction of the Bluetooth module in the headphone.

How to update the firmware on Xiaomi headphones?

To update your firmware: Install the official Xiaomi Earphones app (for Android) or Mi Home. Connect your headphones to your smartphone. Open the app, select your model. If an update is available, a notification will appear. Press Update and wait until it is completed (don't turn off the headphones!). Attention! Don't interrupt the upgrade process - this can lead to loss of headphones.