How to connect Xiaomi mouse to your computer via Bluetooth: the complete guide

Xiaomi's wireless mice have become a popular choice thanks to a combination of stylish design, compactness and reliable operation, but many users have difficulty connecting the device to a computer for the first time via Bluetooth. USB-receiver, wireless gadgets require the correct connection setting.

In this article, we will analyze all the steps of connecting the Xiaomi mouse (including the Mi Bluetooth Mouse, Mi Mouse Lite, Mi Portable Mouse and others) to a Windows PC. 10/11, We will focus on common errors such as a lack of device response, driver problems or sudden communication breaks, and you will learn how to check the compatibility of your model with the operating system and what to do if the mouse is not determined by the computer.

If you've tried to plug in a mouse before, but you haven't succeeded, don't rush it back to the store, and 90 percent of the time, the simple steps we've described below solve the problem.

1.Preparing Xiaomi mouse to connect

Before you connect your mouse to your computer, you need to make sure the device is ready to pair. Most Xiaomi models have a hidden Bluetooth mode activation mechanism that is different from the standard on.

Here's what we need to do:

• 🔋 Charge the mouse (if the model has a battery) or insert the battery (for devices on the device) AA/AAA). The charge level must not be lower. 30%, Otherwise, the connection may be interrupted.
• 🖱️ Turn on the mouse with a long press on the power button (usually 3-5 seconds.
• 🔄 Activate pairing mode. To do this: On Mi Bluetooth Mouse, hold the Bluetooth button (located under the wheel or on the bottom panel) for 5-7 seconds until the indicator starts flashing at intervals of 1 time per second. On Mi Portable Mouse, press the left and right buttons for 3 seconds at the same time.
• 📋 Some models (e.g. Xiaomi Mi Mouse 2) require pre-installing proprietary Mi Bluetooth Suite software to work properly.

If the mouse light doesn't flash, try resetting the device.

1. Turn off the mouse.
2. Press the Bluetooth button (or left button) + right-hand button) for 10 seconds.
3. Release and turn on the mouse again.

💡

If your Xiaomi mouse doesn't respond to taps, check to see if the power saving mode is activated. Some models automatically shut down after 5 minutes of inactivity. To wake the device, just press any button.

2. Check the compatibility of the mouse with your computer

Not all Xiaomi mice work equally well with different operating systems. For example, models with Bluetooth 5.0 support may not connect to older PCs with Bluetooth 4.0 module, and some features (for example, adjustments). DPI) available only in the firmware.

The table below shows the compatibility of popular models:

If your model doesn’t support your OS, you can try the following workarounds:

• 🖥️ Use it. USB Bluetooth adapter with Bluetooth 5.0 support (e.g. TP-Link) UB500).
• 🔧 Install a virtual machine with a supported OS (for example, Windows on macOS).
• 🔄 Update the mouse firmware through official Xiaomi software (not available for all models).

3. Connecting Xiaomi mouse to Windows 10/11

The pairing process on Windows is usually smooth, but there are nuances that depend on the system version and drivers.

Turn Bluetooth on on your PC|Activate the pairing mode on the mice|Add the device via "Settings"|Check the mouse in the Device Manager-->

1. Turn on Bluetooth on your computer: Press Win + A → Find the Bluetooth tile and activate it. If the icon is not, go to Settings. → Devices → Bluetooth and other devices and switch on the switch.
2. Add your mouse to the device list: In the same menu, click Add Bluetooth or another device. select Bluetooth → Wait until the Mi Bluetooth Mouse (or the name of your model) appears on the list. Click on the device and confirm the pairing.
3. Check Connection: Open Device Manager (Win) + X → Device Manager: Your mouse should appear in the Mice and other pointing devices section.

If the mouse is not identified:

• 🔄 Reboot Bluetooth Service: Open the Services (Win) + R → services.msc, find Bluetooth Support and restart it.
• 🔧 Update drivers: Download the latest drivers for your Bluetooth adapter from the manufacturer’s website (e.g. Intel, Broadcom).
• 🚫 Remove old devices: in Settings → Devices remove all previously connected Xiaomi mice and repeat pairing.

4. Connection to macOS: features and nuances

On a Mac, Xiaomi mice connect easier than on Windows, but there may be functionality issues (for example, side buttons or adjustments do not work). DPI). Here's how to properly hide the device:

1. Activate Bluetooth: Click on the Bluetooth icon in the menu bar (top right corner) and select Turn Bluetooth on. Or go to System Settings → Bluetooth.
2. Start pairing: Make sure the mouse is in search mode (blinking indicator).In the list of devices, find Mi Bluetooth Mouse and click Connect.
3. Customize your mouse (if necessary): If the side buttons don't work, install SteerMouse or USB Overdrive for customization. Bluetooth 5.0 models may require a macOS firmware update.

Important: On macOS Mojave and earlier versions of the mouse, the Xiaomi Mi Mouse 2 and Mi Portable Mouse can only connect in base mode (without support for additional buttons).

If the mouse is connected but is running with delays:

• 🔋 Check the battery level (on macOS it appears next to the device name in Bluetooth settings).
• 📶 Reduce the distance between the mouse and the computer (optimally, up to 1 meter).
• 🔄 Reconnect the mouse by removing it from the list of devices.

💡

On macOS, Xiaomi mice often conflict with other Bluetooth devices (e.g. headphones). If the mouse turns off when using the headset, try connecting it through the headset. USB-receiver (if it comes in complete).

5. Linux Connection: Manual Setup

On Linux, the pairing process may vary depending on the distribution and the kernel version. Most modern systems (e.g. Ubuntu 20.04)+, Fedora 35+) Xiaomi mouse support out of the box, but sometimes manual adjustment is required.

Instructions for Ubuntu/Debian:

1. Install the necessary packages: sudo apt update sudo apt install bluez blueman
2. Launch blueman (Bluetooth graphics manager): blueman-manager
3. Add the mouse: Enable mouse search mode. In blueman, click Search. → Choose the Mi Bluetooth Mouse → Hide it, if you're asked. PIN, enter 0000.

If the mouse is not identified:

• 🔧 Check if bluetooth: sudo systemctl status bluetooth is running: sudo systemctl start bluetooth
• 🔄 Reboot Bluetooth module: sudo hciconfig hci0 down sudo hciconfig hci0 up
• 📋 Upgrade the kernel to the latest version (Xiaomi mice are better supported in 5.4 cores)+).

FastConnectable = true

Then restart the service:

sudo systemctl restart bluetooth

6. Solving common problems

Even after a successful connection, the Xiaomi mouse can run unstable. Consider typical faults and how to fix them.

The mouse connects but does not move or freezes.

Causes and solutions:

• 🔋 Battery discharge: charge the mouse or replace the battery. On models with an indicator, red signals low charge.
• 📶 Weak Bluetooth signal: Reduce the distance to the adapter. Remove obstacles (metal surfaces, other wireless devices). Connect the mouse through the adapter. USB-receiver (if it is included in the set).
• 🖥️ Driver conflict: remove the mouse from the list of devices and connect again.

The mouse spontaneously shuts down.

Possible causes:

• ⚡ Power Saving Mode: Turn it off in your mouse settings (if you have software) or in your PC’s Bluetooth settings.
• 🔄 Automatic reconnect: Some Xiaomi models break the connection when inactive.To avoid this, periodically press the buttons.
• 🔧 Firmware problems: Update your mouse software through the official Mi Bluetooth Suite app.

Additional buttons are not working.

If the side buttons or wheels do not perform their functions:

• 🖱️ Install proprietary software: For Windows: Mi Bluetooth Suite or Xiaomi Mouse Center. For macOS: SteerMouse or USB Overdrive.
• 🔧 Set the buttons manually through the Control Panel → Mouse. → Properties of buttons (Windows).
• 📋 Check the compatibility of the model with your OS (see the table in section 2).

7. Alternative ways of connecting

If Bluetooth connectivity is not possible (for example, your PC does not have a module or your mouse does not support your OS), alternative methods can be used.

Connection through USB-receiver (if included)

Some Xiaomi models (such as Mi Portable Mouse) support USBdongle connectivity.

• ⚡ More stable connection without delay.
• 🔋 Lower battery consumption.
• 🖥️ It works on any OS without additional drivers.

How to connect:

1. Put the receiver in. USB-port.
2. Turn on the mouse (Bluetooth mode must be turned off).
3. Wait for the driver to install automatically (usually 10–30 seconds).

Using a mouse in wired connection mode

Some models (e.g. Xiaomi Mi Mouse 2) support USB-TypeC cable connectivity.

• 🔋 You need to charge the mouse and use it at the same time.
• 🖥️ Bluetooth module on PC is defective.
• 🎮 Minimum delay required (relevant for gaming).

To switch to wired mode:

1. Connect the mouse to the PC via cable.
2. Press and hold the Bluetooth button for 5 seconds until the indicator goes out (this will turn off wireless mode).
3. The mouse will work like a wire.

💡

USB-Xiaomi's receiver often conflicts with other wireless devices at 2.4 Hz (such as Wi-Fi routers). If the mouse is slowing down, try connecting the receiver to the radio. USB-port on the front panel of the system unit or use USB-extensioner.

8.Xiaomi Mouse Firmware Update

If your mouse is unstable, the reason may be outdated firmware. Xiaomi periodically releases updates that fix compatibility errors and add new features (for example, support for Bluetooth 5.2 or additional gestures).

How to update firmware:

1. Download the official software: For Windows: Mi Bluetooth Suite or Xiaomi Mouse Center. For macOS: use SteerMouse (firmware update is not available for all models).
2. Connect the mouse: Connect the mouse to the PC via Bluetooth, or connect it via cable (if the model supports wired mode).
3. Launch the update: Open Xiaomi Software. Go to Firmware or Updates. Click Check Updates and follow the instructions.

Attention! ⚠️ Do not turn off the mouse or pull the cable during a firmware update.This can cause permanent damage to the device.If the process is interrupted, try repeating the update or contact Xiaomi Support.

After the update:

• 🔄 Reconnect the mouse to the computer.
• 🔧 Check the operation of all buttons and functions.
• 📋 If new settings are introduced (for example, adjustments) DPI), customize them to your needs.

FAQ: Frequent questions about Xiaomi's mouse connection