How to set up mobile Internet Lugacom on Xiaomi Redmi: full instruction 2026

Setting up mobile Internet from operator Lugacom on smartphones Xiaomi Redmi often raises questions among users — especially if SIM-Unlike major federal carriers, regional providers like Lugacom don't always automatically send out configurations. SMS, And manual settings require you to enter the parameters precisely. This article will help you figure out how to set the settings correctly. 3G/4G-Internet on any Redmi, including Note models 12, Redmi 10, Redmi A2 and others), avoid common errors and fix connection problems.

We'll look at two main ways: automatic setup via operator SMS (if available) and manual APN input with current parameters for 2026. We'll also look at what to do if the Internet doesn't work despite the right settings, how to check the balance and tariff, and why Xiaomi may not see Lugacom's network. All instructions are adapted to the latest version of the MIUI 15 shell (and are compatible with MIUI 14).

1.Preparation: What to do before setting up the internet

Before you start setting up, make sure that the basic conditions are met:

• 📱 SIM-The new card Lugacom requires registration - check that it is unlocked (usually comes in) SMS confirmatory).
• 📶 There's network coverage. Make sure the status bar shows a network icon (like L or Lugacom) If it's not there, the problem might be in the network. SIM or operator settings.
• 🔄 Updated software. Outdated version MIUI It may contain bugs with the work of regional operators. → The phone. → Updating the system.
• 🔋 Mobile Internet is enabled. Sometimes users forget to activate data transfer. Swipe down from the top of the screen and check that the mobile data button is on.

If you just inserted SIM-If you reset your phone, you can help the system recognize the new operator, and you also need to make sure that you have enough money in your account, because Lugacom can block the Internet with zero balance, even if the tariff is unlimited.

2. Automatic Internet setting (if available)

The easiest way is to get the settings automatically via SMS from the operator, and Lugacom periodically sends configuration messages to new subscribers, but not always, to request manual settings:

1. Open the Messages app.
2. Create a new SMS and send an empty message (without text) to the number 1234.
3. Wait for the response with the settings (usually comes within 1-5 minutes).
4. Click on the received message and select Set or Apply Settings.

If SMS If you don't come, try sending a message with text or settings (sometimes helps). Also check if your phone is blocking service. SMS: Go to Settings. → Annexes → Communications → Permits and make sure all permissions are included.

💡

If the automatic setup didn’t work, don’t panic – manual APN input takes no more than 2-3 minutes and is more reliable, since you control all settings.

3.Manual APN setup for Lugacom on Xiaomi Redmi

If the automatic method didn't work, you'd have to enter the parameters manually. It's not difficult, but it requires accuracy. A mistake in even one character (for example, an extra space) can lead to a lack of Internet access.

Follow the instructions:

1. Open the Settings. → SIM-maps and mobile networks.
2. Choose yours. SIM-map of Lugacom (if there are several).
3. Go to Access Points (APN).
4. Click on the three dots in the top right corner and select the New Access Point.
5. Fill in the fields according to the table below.

After filling in, save the settings, select the APN profile you created, and restart your phone. If the Internet is not working, check:

• 🔍 Correctness of the data entered (especially APN type APN).
• 📵 Is mobile data included in the notification curtain.
• 🔄 Network Mode: Go to Settings → SIM-map → Preferred network type and select 4G (recommended 3G.

4. Typical errors and their solutions

Even if you set up the Internet correctly, here are the most common problems and ways to fix them:

⚠️ Note: If after setting up APN The internet doesn't appear, but the icon 4G/3G I have, try to turn it off. VPN Ad blockers (such as AdGuard) may conflict with regional operators.

• 🚫 No network icon (L or Lugacom):
• 🌐 The Internet is working, but websites are not open:
• 🔄 Constantly switching between 3G and 4G:

Important: if after all the manipulations the Internet did not work, contact Lugak support at 8 800 100-07-01 and check whether the services on your number are blocked.

5. Verification of balance and tariff by Lugak

To make sure the issue isn’t in the tariff or balance, check them through USSD-team:

• 💰 Balance: dial *100# and press "Call».
• 📊 Tariff and traffic balance: *105#.
• 🔄 Details: *107# (shows traffic flow for the current period).

If you have unlimited rates but the internet is not working, you may have exhausted FUP (maximum speed limit) and after exceeding FUP, the speed can drop to 64-128 kbps, making surfing almost impossible.

6. Additional settings for stable operation

To improve the quality of communication and Internet speed, set the following parameters:

• 📡 Network mode: if there is a weak signal in your region 4G, force-on 3G In Settings → SIM-map → Preferred type of network.
• 🔋 Traffic savings: Turn it off in Settings → Connections and sharing → Saving traffic as it can limit background data transfer.
• 🔒 Safety: If you use it VPN, Add an exception for apps that need the internet (like YouTube or Telegram).

It is also worth updating the IMEI (if it is lost after firmware), but this is only true for devices with unofficial software. To check the IMEI, dial *#06# - if it is displayed as 000000000000000, you will need to restore through the Mi Flash Tool.

💡

If the Internet is unstable after all the settings, try resetting the network settings: Settings → System → Settings Reset → Resetting the settings of Wi-Fi, mobile network and Bluetooth. This will delete all the saved networks and APNs, after which they will have to be reconfigured.

FAQ: Frequent questions about setting up Lugacom on Xiaomi