How to connect a Xiaomi TV to a computer via a Wi-Fi router: the complete guide

Modern Xiaomi TVs support many wireless connections, but the most versatile and stable option is Wi-Fi router communication, which allows you to broadcast the PC screen to the big screen, manage media and even use the TV as a second monitor without unnecessary wires. However, setting up such a connection often raises questions: why devices do not see each other, how to turn on the necessary protocols, or what router settings affect the quality of transmission.

In this article, we will analyze all the current ways of connecting - from the standard Miracast and DLNA We will focus on the settings of the Xiaomi router (or any other) that directly affect the stability of the connection: the choice of Wi-Fi channel, prioritizing traffic and turning off energy-saving functions. You will also find solutions to typical problems, from “no sound” to “image delay».

1. Device Preparation: What to Check Before Connecting

Before setting up a connection between PC and Xiaomi TV, Make sure that both devices meet the minimum requirements, which will save time and avoid unnecessary errors.

On the TV side:

• 📺 The model should support Wi-Fi Direct or Miracast (all Xiaomi TVs after 2018, including the Mi series). TV 4S, Mi TV Q1, Redmi Smart TV).
• 🔄 Update your firmware to the latest version through Settings → On TV. → Updating the system.
• 🔌 Connect your TV and router to the same power grid (some features, such as Wake-on-LAN, require this).

On the computer side:

• 💻 Operating system: Windows 10/11 (for Miracast, macOS 10.15+ (for AirPlay) or Linux with wfd drivers installed.
• 🔧 Video card must support Wi-Fi Display (most of the cards) Intel/AMD/NVIDIA after 2015 Checkable through Device Manager → Video adapters.
• 🚫 Turn it off. VPN Firewalls (such as Avast or Kaspersky) that can block local traffic.

On the router side:

• 📶 Wi-Fi frequency: 5 GHz (recommended for minimal delays) or 2.4 GHz (if 5 GHz is not catching).
• 🔒 Type of protection: only WPA2-PSK or WPA3 (Open the router settings at 192.168.0.1 or 192.168.1.1).
• 🔄 Enable Multicast (some routers call it) IGMP Snooping, otherwise. DLNA won't work.

⚠️ Attention: If your Xiaomi TV Released before 2018 (e.g. Mi) TV 3), it may not support Miracast due to hardware limitations. DLNA External devices like Mi TV Stick.

2. Method 1: Miracast – Duplication of the PC screen on Xiaomi TV

Miracast is a wireless image standard built into Windows and most modern TVs that allows you to duplicate your PC screen on TV with minimal latency (ideal for presentations or watching movies).

Instructions for Windows 10/11:

1. On TV: Open Settings → Connections → Wireless Display: Enable the Wi-Fi Display option (some models may call it Miracast or Screen Mirroring).

• Press Win. + K (or open the settings) → System system → Screen. → Connect to a wireless display).
• In the list of available devices, select your Xiaomi TV (the name will be MiTV-XXXX type).
• Confirm the connection on the TV (entry may be required) PIN-code).

If the devices do not find each other:

• 🔄 Restart the router and both devices.
• 📡 Check that PC and TV are connected to the same Wi-Fi network (not the guest one!).
• 🛠️ Update video adapter drivers on PC through Device Manager.

Connected to a single Wi-Fi network|Miracast is on TV|Video adapter drivers updated|Router supports Multicast|Disabled. VPN firewalls

-->

For macOS, use AirPlay (if the TV supports):

1. On TV: Settings → Apple AirPlay → Enable AirPlay.
2. On Mac: Open Control Center → Screen mirroring and choose your Xiaomi TV.

⚠️ Note: When connecting via Miracast, there may be a delay of up to 200 ms. For synchronization, open Settings on TV → Sound. → Lag in sound and select the value manually (start with 150 ms).

3. Method 2: DLNA — streaming

DLNA (The Digital Living Network Alliance allows you to stream media from your PC to your TV without having to duplicate the entire screen, and it's convenient for watching movies, listening to music, or watching photos. Unlike Miracast, there's no delay, but only files are transferred, not the screen.

Setting up for Windows:

1. Turn it on. DLNA-Server: Open the Control Panel → The Internet and the Internet → Network control centre → Additional Sharing Options: Enable Media Sharing and select movie/music folders.

• Open the Media Player or Gallery app.
• Select the source. DLNA — Your PC will appear in the list (name from network settings).

For Linux/macOS use the programs:

• 🐧 Linux: MiniDLNA or Rygel (install via terminal: sudo apt install minidlna).
• 🍎 macOS: Plex Media Server or Kodi.

💡

If the TV can't see DLNA-server, check that the router settings enable UPnP (Universal Plug and Play) which automatically opens ports to local devices.

4. Method 3: Steam Link: Games from PC to big screen

If you are a gamer, Steam Link will allow you to stream games from your computer to Xiaomi TV It requires a PC with Steam installed and a stable connection to a 5GHz Wi-Fi router or cable.

Step-by-step:

1. On PC: Set Steam and log in. Open Settings → Remote Play and Enable Remote Play.

• Install the Steam Link app from Google Play Store (available on all Xiaomi) TV Android TV).
• Connect the gamepad via Bluetooth (for example, Xiaomi Game Controller).
• Launch Steam Link on TV, select your PC from the list and start streaming.

Optimization for games:

• 🎮 In Steam Link settings, select Performance Priority (reduces latency but reduces quality).
• 📡 Connect your PC to your router via cable and your TV to 5GHz Wi-Fi (or use Powerline adapters for wired connection).
• 🔧 In the router settings, enable QoS (Quality of Service) and prioritize your Steam device.

5. Router settings for stable communication

The quality of the broadcast depends on the settings of the router, and even if the devices are connected correctly, incorrect network settings can cause video stuttering, connection breaks or no sound.

Key parameters for setting:

• 📶 Wi-Fi channel: For 2.4 GHz, select channels 1, 6 or 11 (They don't overlap. 5 GHz, use channels 36-48 or 149-165 (less-loaded).
• 🔄 Mode of operation: Install 802.11ac (or 802.11ax for new routers) instead of mixed mode. Channel width: 40 MHz for 2.4 GHz, 80 MHz for 5 GHz.
• 🛡️ Security: Type of encryption: WPA2-PSK (or WPA3, If it's supported. WPS — It's a vulnerable protocol.
• ⚡ QoS (Quality of Service): Enable and prioritize MAC-Limit traffic to other devices (such as smartphones) while broadcasting.

How to open the router settings:

1. Connect to the router network.
2. Enter 192.168.0.1 or 192.168.1.1 (the address is indicated on the router sticker).
3. Log in (the default login and password is often admin).
4. Go to the Wireless Settings or Wi-Fi section.

💡

If you have a Xiaomi router (such as Mi Router) 4A or AX3600), Use the Mi Wi-Fi app to quickly set up QoS and prioritize traffic.

6. Solving typical problems

Even with the right setup, you can get errors, and here are the most common ways to fix them:

If nothing helps:

• 🔄 Reset your network settings to TV: Settings → Network → Resetting network settings.
• 📡 Update the router firmware (download from the official manufacturer's website).
• 🛠️ Check your PC for viruses – some Trojans block local traffic.

7. Alternative ways of connecting

If standard methods do not work, consider alternatives:

1. via Google Cast (Chromecast)

• 📱 Install Google Home on TV (available on all Xiaomi apps) TV Android TV).
• 💻 On PC, use Google Chrome browser and Google Cast extension to broadcast tabs.
• ⚡ Supports 1080p60, delayed ~300 ms.

2. Through HDMI- adapter (for older models)

• 🔌 If you're Xiaomi. TV Does not support Wi-Fi Direct, use Mi Wi-Fi Display Dongle (connects to the port) HDMI).
• 📶 It works as an external Miracast receiver.

3. via Plex or Kodi

• 🎬 Install Plex Media Server on PC and Plex on TV to organize a personal media library.
• 🔍 Supports transcoding (automatic format conversion).

4.For advanced users: Parsec

• 🎮 Program for streaming games from PC to TV with a delay ~10ms (better than Steam Link).
• 🔧 Requires registration and configuration of ports on the router (TCP 8000, UDP 8000).

8. Comparison of Connection Methods: Which to Choose

The choice of method depends on your tasks. Below is a table with a comparison of key parameters:

For most users, it is best to:

• Miracast – if you want to duplicate your PC screen (for example, for work or presentations).
• DLNA — If only the transfer of media files without screen duplication is required.
• Steam Link/Parsec — For gamers, where the minimum delay is critical.

💡

For maximum stability, use a wired connection (via a USB-Ethernet adapter for TV) instead of Wi-Fi. This will eliminate delays and connection breaks.

FAQ: Frequent questions

Through HDMI:

• Use the adapter. USB-C to HDMI (for example, Xiaomi USB-C to HDMI).

Miracast on macOS is not directly supported – you will need a Windows virtual machine.