Mobile Internet connectivity from Wave Mobile on Xiaomi smartphones (including Redmi, POCO and Mi models) is a frequent question for users. Despite automatic settings, many face problems with no network, slow connection or authentication errors. In this article, we will discuss step-by-step APN setup, network settings check and solving common errors, from the lack of a 4G/LTE icon to authorization problems.
The feature of Wave Mobile is the use of a virtual network based on the MTS infrastructure, which requires specific settings of access points (APN). If your Xiaomi does not connect to the Internet automatically - do not rush to blame the operator: in 80% of cases, the problem is solved by manual adjustment of parameters. We will consider the current settings for MIUI 12-14 (including global and Chinese firmware), and give recommendations for optimizing the connection speed.
1. Checking support for the Wave Mobile network with your Xiaomi
Before you set up the internet, make sure your Xiaomi smartphone is compatible with the operator's network.Wave Mobile works in the ranges:
- 📶 2G (GSM): 900/1800 MHz
- 📶 3G (UMTS): 2100 MHz (Band 1)
- 📶 4G (LTE): 800 (Band 20), 1800 (Band 3), 2600 (Band 7) MHz
Most of Xiaomi’s current models (starting with the Redmi Note 7 and Mi 9) support these frequencies, but there are nuances:
- 🔍 Smartphones with Chinese firmware (such as Xiaomi 12 Pro China) may not have bands for Russian carriers.
- 🔍 Devices with MediaTek Helio (e.g. Redmi) 9A) Sometimes you need to manually select the network in your settings.
If your Xiaomi is not catching the Wave Mobile network even after setting up an APN, check:
⚠️ Note: On smartphones with double SIM-card (for example, Redmi Note) 10 Pro) slot 1 usually 4G, sloth 2 — only 2G/3G. Install. SIM-card.
2. Automatic Internet setting
Wave Mobile sends the APN settings automatically via SMS to get them:
- Put it in. SIM-card in the smartphone and enable mobile data.
- Send. SMS textual INTERNET 0605 (free of charge).
- Wait for the response with the settings and confirm the installation.
If the SMS does not arrive within 5 minutes:
- 📱 Check if the number 0605 is blocked in the blacklist (Settings) → Annexes → Phone. → Number locking).
- 📡 Make sure that the smartphone is connected to the network Wave Mobile (the operator logo should be displayed in the status bar).
- 🔄 Restart the device and repeat the request.
💡
If the automatic setting doesn’t work, don’t delete the SMS you receive – it contains the correct APN settings that you can manually enter.
3.APN manual setup for Wave Mobile
If the automatic setting doesn't work, create the access point manually. Open the menu:
Settings → SIM-maps and mobile networks → [Choose. SIM Mobile Wave] → Access points (APN)
Click Add Access Point and enter the following settings (current for 2026):
| Parameter | Meaning | Note |
|---|---|---|
| Name. | Mobile wave | arbitrary name |
| APN | internet.wave | Basic parameter |
| User name | wave | Register is important! |
| Password. | wave | Same as the username |
| Type of authentication | PAP | Don't change to CHAP |
| Type APN | default,supl | For proper operation of MMS |
Leave the remaining fields empty or with default values.
Select the created profile in the list of APN|
Reboot your smartphone |
Enable mobile data (switch in notification curtain)|
Check the badge 4G/LTE status-line-->
If the Internet does not work after manual setting, delete all the others. APN-Profiles – Parameter conflict can block the connection.
4. Optimization of connection speed and stability
Even with the right APN settings, internet speeds can be slow. Here's how to improve connectivity:
- 📶 Manual Network Selection: Go to Settings → SIM-maps and mobile networks → Select a network and select Wave Mobile (not "Automatic"). This helps with frequent reconnections.
- 🔧 VoLTE Disconnection: In some regions, Wave Mobile is unstable with voice over the Internet LTE. Turn off the option in Settings → SIM-map → [Yours. SIM] → Voice calls.
- 🌐 Shift. DNS: Use public DNS (For example, 8.8.8.8 and 8.8.4.4 from Google) to speed up the loading of sites. → Wi-Fi → Additionally. → Settings DNS.
To check the real speed, use the Speedtest by Ookla app. Normal readings for the Mobile Wave in 2026:
- 📊 4G (LTE): 10–50 Mbps (depending on network load).
- 📊 3G: 2–10 Mbps if 4G idle).
What to do if the speed is below 1 Mbps?
5. Solving common mistakes
Let’s look at the typical problems and their solutions:
| Mistake. | Reason. | Decision |
|---|---|---|
| No 4G/LTE badge | Smartphone connected to 2G/3G | Settings → Mobile Network → Preferred Network Type Choose 4G (preferably)/3G/2G |
| "Authentication failed." | Incorrect username/password in APN | Check the APN settings (should be wave/wave) |
| The Internet only works after a reboot. | Conflict IP-address | Turn on the plane mode for 30 seconds, then turn off. |
| Websites are not loaded, but messengers work | Problems with DNS | Change your DNS to Google (8.8.8.8) or Cloudflare (1.1.1.1) |
If after all the manipulations the Internet did not work:
⚠️ Note: Xiaomi smartphones with custom firmware (such as LineageOS or Pixel Experience) may not support virtual carriers. MIUI or check for patches for your firmware.
6.MMS setup for Wave Mobile
For sending and receiving MMS (Multimedia messages) require separate APN-Create a new profile with parameters:
- 📩 Name: Wave MMS
- 📩 APN: mms.wave
- 📩 Username/password: wave
- 📩 MMSC: http://mmsc:8002
- 📩 proxy MMS: 192.168.192.192:8080
- 📩 Type APN: mms
After saving, restart your smartphone. If the MMS is not sent:
- 🔄 Make sure that in the message settings (Messages) → Settings → MMS) Automatic download option is included MMS.
- 📡 Check that mobile data is included (MMS They don't work over Wi-Fi).
7. Checking the balance and activity of services
Sometimes the problem isn't with smartphone settings, but with the rate or the service lockdown, to check the status:
- 💰 Balance: Dial *100# and press the call.
- 📤 Active Services: Send SMS textual STATUS on 0605.
- 🚫 Blocking: If the Internet does not work after replenishment, dial *111*01# unlockable.
If you have enough money in your account, but the Internet is not activated:
⚠️ Attention: The operator Wave Mobile has a feature - at the first connection SIM-The internet may be blocked until Identity is confirmed. SMS from the operator with the activation instructions or call support on 0605 (free call).
8. Alternative ways of connecting
If mobile internet is not available, consider alternatives:
- 📲 Modem mode: Connect your smartphone to your PC through USB and turn on USB-Modem in Settings → The access point and modem will help to check if the Internet is working at the level of the Internet. SIM-map.
- 🔗 Link to another device: Use Xiaomi as a Wi-Fi hotspot for another gadget. If the Internet works, the problem is the settings of the main device.
- 🔄 Replacement SIM-Cards: Contact the salon Wave Mobile for a new one SIM-Card (possibly damaged or not supported by old card) 4G).
If none of these methods worked, contact Xiaomi’s service center for a diagnosis of the communication module. On Redmi Note 8 Pro, POCO X3 and others with MediaTek chipset, module malfunction is a common problem after falls or moisture.
💡
90% of Internet problems on Wave Mobile are solved by adjusting APN or changing the type of network (2G/3G/4G). If the settings are correct, but the connection is not – the operator or hardware of the smartphone is to blame.