Reset Xiaomi Redmi Note 3 Pro to factory settings: a complete guide with photos and videos

Xiaomi Redmi Note 3 Pro is a legendary smartphone that is still used by millions of users. But even the most reliable device eventually begins to slow down, emit errors or simply requires a clean start. Resetting to factory settings is a universal solution for most software problems, from freezes to viruses. But how do you do it, so as not to turn the phone into a brick?

In this article, we will look at all possible ways to reset, from simple menus in settings to complex manipulations through Fastboot and Recovery, how to prepare the device, what data you can save and what you will lose, and we will also answer the most common questions: What to do if the smartphone does not turn on, how to bypass the lock MI-Post-Reset Accounts and Why Sometimes the Process Ends in Error.

Important: Redmi Note 3 Pro has two versions — on Qualcomm Snapdragon 650 processors and MediaTek Helio X10. Reset methods for them are different, and we will describe in detail the nuances for each. If you do not know what model you have, check in Settings → Phone → Model.

1.Reset preparation: what to do before cleaning

Factory reset is the complete removal of all data from the internal memory of your smartphone. Even if you plan to sell the device, don't neglect backup. Here's what's going to disappear:

• 📸 Photos and videos from the gallery (including screenshots and downloads)
• 📱 Contacts that are not synced to Google or Mi Cloud
• 📝 SMS and call history (not automatically saved)
• 🎮 Game saving and application data (e.g. progress in the PUBG Mobile or Genshin Impact)
• 🔑 Wi-Fi passwords and network settings

To avoid losing something important, follow these steps:

Synchronize your contacts with your Google account|Copy photos/videos to PC or cloud|Write down passwords from Wi-Fi and accounts|Remove the associated bank cards (Google Pay, Sberbank Online)|Check the battery charge (minimum 50%)-->

Pay special attention MI-If you forget your username/password, the reset will lock your phone — Xiaomi requires you to log in after cleaning:

1. Go to Settings → Xiaomi account.
2. Make sure you remember your email and password.
3. If your account is not yours (for example, the phone was purchased by a used one), be sure to delete it before resetting through Settings → Xiaomi Account → Delete the account.

⚠️ Note: Redmi Note 3 Pro with MediaTek processor may require unlock code after reset FRP (Factory Reset Protection: This is a theft protection that works if you have a Google account attached to your phone!

2. Method 1: Reset via the settings menu (the easiest)

If the smartphone is turned on and reacts to touch, this method is the best choice. It requires no additional tools and takes only 5-10 minutes.

Instructions:

1. Open Settings (the gear icon on the main screen).
2. Go to the section Additional → Recovery and Reset.
3. Select Settings Reset.
4. Read the warning and click Reset your phone settings.
5. If necessary, enter PIN-code.
6. Confirm the action with the Remove Everything button.

The phone will reboot and start the cleanup process. The Mi logo and the progress bar will appear on the screen. Don't turn the device off at this point, it can damage system files. It usually takes 3-7 minutes to reset.

💡

If the phone hangs on the logo for a long time after reset (more than 15 minutes), try to press the power button for 10-15 seconds for a forced reboot.

On the Redmi Note 3 Pro with Qualcomm Snapdragon 650, a Fastboot menu that says This device is locked may appear after a reset. That's OK - just select Reboot using the volume buttons and confirm with the power button.

3. Method 2: Reset via Recovery (if the phone is not turned on)

If the smartphone is stuck on the logo, doesn’t respond to touches, or is locked with a password you’ve forgotten, Recovery Mode will help.This is a built-in recovery menu available on all Xiaomi.

There are two types of Recovery for the Redmi Note 3 Pro:

Step-by-step instructions for stock recovery:

1. Turn off the phone (press the power button for 10 seconds if it freezes).
2. Press the Volume Up and Power Button at the same time.
3. Hold for 5-10 seconds until the Mi logo and menu appear.
4. With the volume buttons, select Wipe & Reset (or Wipe Data).
5. Confirm the choice of the power button.
6. Select Wipe All Data and confirm it again.
7. After completion, select Reboot.

⚠️ Note: Some versions of the Redmi Note 3 Pro with MediaTek may have a No command error after resetting via Recovery. In this case, try repeating the process or use Method 3 (Fastboot).

If you have TWRP installed, the algorithm is a little different:

1. Go to TWRP (similar to drain recovery).
2. Select Wipe → Advanced Wipe.
3. Check Dalvik/ART Cache, System, Data, Internal Storage.
4. Swipe your finger across the screen to confirm (Swipe to Wipe).
5. After cleaning, reboot to the system.

Method 3: Reset via Fastboot (for power users)

This method will be useful if:

• 🔄 The phone is stuck in the boot cycle (bootloop).
• 🔒 Password is forgotten and Recovery is not available.
• 🛠️ You need to reflash the device after a failed update.

Fastboot is a firmware mode that allows you to control your smartphone from a computer.

• 💻 Windows computer (or Mac/Linux driverless).
• 🔌 Cable USB Type-C (original, undamaged).
• 📦 The Mi Flash Tool or ADB/Fastboot.

Instructions:

1. Download and install the Mi Flash Tool (the official Xiaomi website).
2. Turn off the phone.
3. Press Volume Down + Nutrition for 5-10 seconds until the image of a rabbit in a hat appears.
4. Connect your smartphone to your computer.
5. Open the command line (Win + R → cmd) and type:

fastboot devices

If the device is determined (the serial number will appear), enter the command to reset:

fastboot erase userdata


fastboot erase cache




fastboot reboot

For complete cleaning (including system files) use:

fastboot erase system


fastboot erase boot




fastboot erase recovery

⚠️ Warning: The fastboot erase system and fastboot erase boot will remove the firmware. Once they run, the phone won't turn on without flashing it back! Use only if you're confident in your actions.

If the phone doesn't turn on after resetting via Fastboot, try flashing it again using the Mi Flash Tool.

1. Download the official firmware for Redmi Note 3 Pro from the Xiaomi Firmware Updater website.
2. Unpack the archive in a folder without Cyrillic characters.
3. In the Mi Flash Tool, select the firmware folder and press Refresh (the device must be determined).
4. Press Flash and wait until it is completed (10-15 minutes).

Through the Settings menu | Through Recovery | Through Fastboot |I haven't tried-->

5. Frequent errors and their solutions

Even if you do the instructions right, you can end up with a reset error, and let's look at some of the most common problems and how to fix them.

If after reset Redmi Note 3 Pro does not determine SIM-map or not catching the network, check:

• 📶 Correct installation SIM (Some versions require nano-SIM in the first slot).
• 📡 Network settings: Settings → SIM-maps and mobile networks → Access point settings (APN).
• 🔄 Update the firmware (sometimes bugs are fixed in new versions) MIUI).

💡

If the phone requires the account of the previous owner after reset (when buying used), contact the seller to remove the binding.

6.How to reset Redmi Note 3 Pro without data loss (partial cleanup)

If your goal is not to completely reset, but to fix specific problems (such as brakes or application errors), you can perform a partial cleanup, which will delete temporary files and cache, but save personal data.

Partial cleaning options:

• 🧹 Cache Cleanup: Go to Settings → Annexes → Select the application → Clear the cache. For system cache: Settings → Warehouse → Cache data.
• 🔄 Resetting network settings: Settings → System system → Resetting settings → Reset network settings (remove saved Wi-Fi and Bluetooth devices).
• 📱 Delete application-specific data: Settings → Annexes → Select the application → Warehouse → Clear the data.

For deep cleaning without losing files, you can use Safe Mode:

1. Press the power button before the off menu appears.
2. Hold your finger on Turn off until you are prompted to switch to Safe Mode.
3. All third-party apps are disabled in this mode - check if the problem persists.

If the brakes are caused by a crowded memory, use the built-in cleaning utility:

1. Go to Security. → Cleanup.
2. Click Deep Clean and select unnecessary files (junk, duplicates, large files).
3. Confirm removal.

7.What to do after reset: initial setup

After a successful reset, the Redmi Note 3 Pro will launch as a new one.

1. Choose the language and region (we recommend Russia for the correct operation of Google services).
2. Connect to Wi-Fi (it is advisable to use the same network as before the reset, if you remember the password).
3. Enter in MI-Google Account or Account (if required).
4. Restore data from a backup (if it was created).
5. Update the firmware to the latest version (Settings → About the phone → System Update).

Tips for optimal performance after resetting:

• 🚀 Turn off unnecessary autoboots: Settings → Permits → Auto-start.
• 🔋 Calibrate the battery: Fully discharge and charge the phone 2-3 times in a row.
• 🛡️ Install antivirus: for example, Mi Security or Kaspersky.
• 📲 Set up gestures: Settings → Additionally. → Buttons and gestures.

If new problems appear after the reset (for example, the battery quickly goes down or the processor warms up), do:

1. Virus testing.
2. Cache cleaning via Recovery (Wipe Cache Partition)
3. Reset network settings (sometimes APN conflicts cause increased charge consumption).

FAQ: Answers to Frequent Questions