Xiaomi Pro Tool: how to use to unlock, firmware and restore Xiaomi smartphones

Xiaomi Pro Tool

Xiaomi

Redmi

POCO

Mi Account

total loss of operation of the device

Many users experience problems when they first start up the Xiaomi Pro Tool: it doesn’t see the phone, it gives up errors when unlocking or freezes during the firmware stage, most often due to the wrong driver installation, lack of administrator rights or the wrong version of the tool. In this guide, we will analyze all the nuances from installation to solving typical errors, so that you can safely work with the device.

It is important to understand that Xiaomi Pro Tool is not an official software from Xiaomi; it is a third-party tool developed by enthusiasts for advanced device management. Its use can void the warranty and entail risks if you act without understanding the processes.

What is Xiaomi Pro Tool and Why You Need It?

Xiaomi Pro Tool is a universal software for working with devices based on Qualcomm and Mediatek processors, released under the brands Xiaomi, Redmi and others. POCO. It combines the functions of several utilities, including:

• 🔓 Unlock the bootloader without waiting 72/360 hours;
• 📱 Removing the binding to the Mi Account (relevant when buying used phones);
• 🔄 Firmware custom recovery (TWRP, OrangeFox);
• 🚀 Installation of official and unofficial firmware (Fastboot, EDL);
• 🛠️ Restoration of bricks (devices not included after a failed firmware).

The main advantage of the tool is the automation of processes that usually require manual input of commands through the use of the machine. ADB For example, unlocking a bootloader through the official Mi Unlock Tool can take up to 15 days due to Xiaomi restrictions, whereas the Pro Tool allows you to bypass this wait in some cases.

However, there are limitations:

• ⚠️ Not all models are supported (especially new Snapdragon devices). 8 Gen 2/3);
• ⚠️ The risk of blocking IMEI with incorrect firmware in mode EDL;
• ⚠️ Need for manual firmware and drivers search for some operations.

⚠️ Note: Using Xiaomi Pro Tool to delete Mi Account from other devices may be considered a violation of the law on the protection of personal data.

Preparation for work: system requirements and installation

Before installing the Xiaomi Pro Tool, make sure your computer meets the minimum requirements:

• 🖥️ OS: Windows 7/8.1/10/11 (32 or 64-bit);
• 💾 Free disk space: at least 500 MB (for firmware storage);
• 🔌 Port port USB 2.0 (recommended for stability);
• 🛡️ Disabled Windows Defender and Antivirus (they can block drivers).

For the correct operation of the tool will also require:

1. Qualcomm or Mediatek drivers (depending on your phone’s processor)
2. ADB Fastboot (can be installed via Minimal) ADB and Fastboot);

Step-by-step installation:

1. Download the archive with the latest version of Xiaomi Pro Tool from an official source (for example, forum) XDA Developers or Telegram channel of the developer).
2. Unpack the archive in the root of the C:\ disk (the path should not contain Cyrillic!).
3. Run the XiaomiProTool.exe file on behalf of the administrator.
4. Wait for the automatic installation of drivers (you may need to restart the PC).

Connecting your phone to Xiaomi Pro Tool

To recognize your device, you need to connect it correctly, and the process depends on the mode you plan to work in:

1. Fastboot Mode (to unlock the bootloader and firmware):

• Turn off the phone.
• Press Volume Down + Power before the Fastboot logo appears.
• Connect the device to the PC through USB-cable (preferably original).

2. Mode EDL (brick-restore"):

• Turn off the phone.
• Hold the Loud up. + Loudness down + Nutrition (some models require testpoint).
• The screen will remain black, which is normal as the device goes into emergency boot mode.

If Xiaomi Pro Tool doesn’t see the phone:

• 🔹 Check if the drivers are installed (Qualcomm) HS-USB QDLoader 9008 for the EDL Android Bootloader Interface for Fastboot);
• 🔹 Try another one. USB-cable;
• 🔹 Disable driver signatures in Windows (via gpedit.msc) → User configuration → Administrative templates → System system → Installation of the driver).

⚠️ Attention: Connection mode EDL On some models, the Redmi Note 10 Pro, POCO X3 Pro requires the test points to be closed on the motherboard, without which the phone will not go into emergency mode, and the firmware will not be possible.

Unlock the bootloader without waiting

The official Mi Unlock Tool requires an account binding and a wait of 3 to 15 days. Xiaomi Pro Tool allows you to bypass this restriction on some devices, but the process has nuances.

Instructions:

1. Connect your phone in Fastboot mode.
2. In Xiaomi Pro Tool, select the Unlock Bootloader tab.
3. Click Check Device – the program will determine the model and status of the bootloader.
4. If the device is supported, click Unlock and follow the instructions.

Important points:

• 🔹 On new devices (Xiaomi) 13/14, Redmi Note 12) Bypassing the waiting may not work;
• 🔹 After unlocking, all data will be reset (take a backup copy!);
• 🔹 Some models require authorization through Mi Account, even in Pro Tool.

On devices with a Snapdragon 8 Gen 2 processor (such as the Xiaomi 13 Ultra), unlocking through the Pro Tool often leads to an Anti-Rollback error.

Firmware and device recovery

Xiaomi Pro Tool supports firmware in three modes:

1. Fastboot – for installation of official and custom firmware;
2. EDL — brick-restore";
3. Recovery - for installation ZIP-archives (e.g. Magisk).

Firmware via Fastboot:

1. Download the firmware for your model (for example, from the website xiaomifirmwareupdater.com).
2. Unpack the archive in a folder with Xiaomi Pro Tool.
3. In the program, select the Flash tab. → Select Fastboot ROM.
4. Connect your phone in Fastboot mode and press Flash.

Recovery through EDL:

• 🔹 You need a firmware file in.mbn or.elf format;
• 🔹 The phone should be in mode. EDL (black-screen);
• 🔹 The process can take up to 10 minutes – do not turn off USB!

💡

Before the firmware through EDL Check your device’s Anti-Rollback version.If the firmware is older than the current version, use the Xiaomi Anti-Rollback Checker tool to avoid blocking.

Delete Mi Account and bypass FRP

If you bought a used phone with a Mi Account tied and the previous owner didn’t untie it, Xiaomi Pro Tool can help you delete your account. MIUI.

Instructions:

1. Connect your phone in Fastboot mode.
2. In Xiaomi Pro Tool, go to the Mi Account tab.
3. Click Remove Mi Account and wait for the process to be completed.
4. Reset the device.

If the removal has not been completed:

• 🔹 Try to sew up custom recovery (TWRP) manually delete account files through ADB;
• 🔹 On some models (Redmi 9, POCO M3) Recoil on the old firmware;
• 🔹 If the phone requests a password after rebooting, the security may have worked FRP (Factory Reset Protection).

⚠️ Note: Delete Mi Account via Xiaomi Pro Tool on devices with MIUI 13/14 This often leads to the blocking of Anti-Rollback, which requires official unlocking through the Xiaomi service center.

Solving Typical Errors and Problems

When working with Xiaomi Pro Tool, users often encounter errors. Let’s consider the most common and ways to eliminate them:

Error Device not found:

• 🔹 Check the connection. USB (Try another cable or port);
• 🔹 Install drivers manually through Device Manager;
• 🔹 Turn off the debugging. USB and turn it on again.

2. Anti-Rollback error:

• 🔹 Please use the new version (no older than the current version);
• 🔹 Use the Xiaomi Anti-Rollback Bypass tool (at your own risk);
• 🔹 Contact the service center for official unlocking.

Hanging during the firmware stage:

• 🔹 Wait 10-15 minutes (sometimes it takes longer);
• 🔹 Check the integrity of the firmware file (it may not be fully downloaded);
• 🔹 Try to flash through another PC.

4. the telephone shall not be switched on after the firmware ("brick"):

• 🔹 Try to stitch in mode EDL;
• 🔹 Check if the anti-Rollback protection has worked;
• 🔹 If the screen is black, the PC defines the device as Qualcomm. HS-USB QDLoader 9008, chances of recovery are high.

💡

If Xiaomi Pro Tool is a mistake SLA Auth when working with new devices, this means that the model is not supported. In this case, use official tools or contact the service center.

FAQ: Frequent questions about Xiaomi Pro Tool