Turning off Xiaomi devices using physical buttons seems like a simple task — until you encounter a system freeze, a battery drained or non-standard scenarios. Unlike software shutdown via menus, hardware methods require knowing the exact combinations and accounting for the device model. For example, on Redmi and POCO smartphones, the algorithm may differ from Mi TVs or tablets, and the wrong actions lead to a hard reset instead of a safe shutdown.
In this article, we will discuss all the current ways to disable Xiaomi equipment with buttons, from the classic Power retention to forced reboot in case of critical failures. We will focus on hidden combinations for devices with a broken screen, and also explain why some methods do not work on all models. If your gadget does not respond to standard actions, here you will find alternative solutions.
1. Standard switch off of Xiaomi smartphone power button
The basic method works on all Xiaomi, Redmi and POCO smartphones released after 2016.
- Hold the Power button (usually located on the right end) for 3-5 seconds.
- On the screen will appear menu options: Turn off, Reboot, Emergency mode.
- Turn off and confirm the action (if required).
⚠️ Attention: On models with MIUI 14+ The time of holding the button may vary, for example, on Xiaomi 13 Pro, the menu appears after 2 seconds of holding, and on the budget Redmi. A2 — It's only 5 seconds. It's about optimizing energy.
☑️ Pre-off check
If the menu does not appear, the reasons may be as follows:
- 🔋 Battery discharge (less than 5%) The device may not be able to load the interface.
- 🛠️ Damaged Power button. Check its response when you press it.
- 🤖 Failure MIUI. Try to connect the charger and repeat the action.
Forced shutdown when getting stuck
When a Xiaomi smartphone doesn’t respond to touch or the Power button, a hard reset is required, a technique that simulates battery extraction (which is not possible on current models with non-removable batteries).
Instructions for most models:
- Hold the Power button for 10-15 seconds before the screen is vibrating or turned off.
- If the screen is gone but the device is still vibrating, release the button and wait 30 seconds.
- Hold the Power for another 3-5 seconds to turn on.
What happens when you dump hard?
On some models (e.g. POCO F5 or Xiaomi 12T), the combination is different:
- 📱 Hold on to the Power. + Reduce volume 8-10 seconds for forced reboot.
- 🔄 If the device restarts but does not turn off, repeat the action by holding the buttons to double vibration.
3. Turn off Xiaomi Mi TVs with buttons
Xiaomi Mi TV and Redmi TV have a different button control algorithm. Standard shutdown is done through the remote, but if it is lost or broken, you can use physical buttons on the case.
The location and function of the buttons depend on the model:
| Model | Location of buttons | Combination to turn off |
|---|---|---|
| Mi TV 4A/4S | Right or bottom, under the logo | Hold the Power for 3 seconds |
| Mi TV Q1/Q2 | Behind, by the HDMI connectors. | Power + Menu (hold 5 seconds) |
| Redmi Smart TV X | Under the screen, right | Short press of Power (1 sec.) |
| Mi TV P1 | Back, under the lid. | Power + Volume Down (7 sec) |
⚠️ Note: On Xiaomi TVs with Google TV (Like Mi. TV Q2 2023) Holding the Power button for more than 5 seconds can start the recovery mode instead of turning it off. + Home (if there is a Home button).
If the TV doesn't respond:
- 🔌 Turn off power from the socket for 1 minute, then turn it back on.
- 🔄 Press and hold Power on the case for 10 seconds after connecting to the network.
4.Switch off Xiaomi tablets (Pad 5/6)
Tablets Xiaomi Pad use the same principles as smartphones, but taking into account the features of MIUI for Pad.
- Hold Power 3 seconds → select Turn it off.
- On the Pad 6 Pro, the menu appears in 2 seconds, but requires swipe confirmation.
When you're hanging:
- 🔄 Hold on to the Power. + Volume up 12 seconds for forced reboot.
- 🔋 If the tablet is discharged (blinks a red indicator), connect the charger and hold the Power for 20 seconds.
💡
On Xiaomi tablets, after a hard reset, the screen calibration can be lost. To restore the accuracy of the touch, go to Settings → Display → Calibration of the sensor and perform the procedure again.
5. Features of switching off on devices with damaged screen
If the screen of a smartphone or tablet Xiaomi crashed or does not display the image, but the device responds to presses (vibrates, makes sounds), use blind combinations:
For smartphones:
- Hold the Power for 10 seconds → release after vibration (a sign of off).
- If there is no vibration, connect the charging and repeat the action.
For TVs:
- 📺 Press Power on the case 1 time (short) → Wait 20 seconds. → Press again to turn on.
- 🔌 If the TV is not responding, turn off the power for 2 minutes.
⚠️ Attention: On devices with AMOLED-With screens (such as Xiaomi 13 Ultra), long-term button retention when the display is damaged can lead to overheating. If the case becomes hot, stop trying and contact the service.
6.Switch off Xiaomi devices in Fastboot mode
If the device only loads in Fastboot mode (black screen with a rabbit and a sign) FASTBOOT), The standard power switch won't work:
For smartphones and tablets:
- Hold the Power for 15-20 seconds until it is completely shut down.
- If the device is booted back into Fastboot, remove and insert the battery back (if possible) or wait for a full discharge.
For TVs:
- 📺 Turn off the power cable for 5 minutes.
- 🔄 Hold the Power button on the case when connecting to the network (10 seconds).
💡
Fastboot is not a bug, it's a service mode for firmware. If the device loads into it all the time, it could indicate a corrupted firmware or hardware failure.
7. Frequent mistakes and how to avoid them
The wrong actions when switched off with buttons can exacerbate the problem.
- ⏳ Power retention is too short. Many models only have menus after 3.+ Users release the button earlier.
- 🔋 If the screen is on a progress bar (for example, Updating...), the interruption will lead to a blink (breaking the firmware).
- 🔄 Using combinations from other brands, such as Power + Home + Volume Up (like Samsung) on Xiaomi launches recovery mode rather than turning off the device.
How to do it right:
- 📱 Before turning off, check if there is a background update (in Settings). → The phone).
- 🔋 If the device is discharged to 0%, connect charging for 5-10 minutes before trying to turn off.
- 🛠️ On TVs, avoid holding buttons longer than 10 seconds – this can reset the settings to factory settings.