How to turn on Xiaomi Redmi Note 10S: 5 working ways (including “bricks”)

Xiaomi Redmi Note 10S is one of the brand’s most popular handsets, but even it sometimes refuses to turn on. The reasons can range from a dead battery to software failures after an update. This article will help bring the device back to life, whether it’s stuck on the logo, unresponsive to buttons or not at all.

We will look at all possible scenarios, from basic to emergency. It is important to understand that some methods (for example, working with Fastboot or Fastboot). EDL-They require minimal technical skills. If you've never encountered Android firmware, you'd better go to the service center.

We warn you beforehand that if your phone falls into water, overheats or has physical damage, you need to fix it first. Software methods won't help here. Also, don't try to turn on a device with a bloated battery - it's dangerous!

1. Standard turn on: what to do if the phone does not respond to the button

If the Redmi Note 10S doesn’t turn on after a full discharge or long downtime, try these steps:

✅ Connect the original charger (or Quick Charge 3.0 compatible) and wait at least 15-20 minutes. Even if nothing is displayed on the screen, the battery could run to zero, and the first minutes of charging will not be accompanied by an indication.

✅ Press and hold the power button (right side) for 10-15 seconds. Sometimes the device falls asleep after deep discharge, and a long press helps it to wake up».

✅ If the Redmi logo appears on the screen, but the download does not go on (hangs on the screen). MIUI or flashing), go to the section about forced reboot.

• 🔌 Use a different cable/charger – often the problem is damaged. USB-cable or weak power supply.
• 🔋 Check the charging port — try wiggling the cable slightly in the connector. If the phone starts charging only in a certain position, the port needs cleaning or repair.
• 🌡️ Let your phone cool down/heat up – if it overheats or overcools, wait 30 to 60 minutes at room temperature.

⚠️ Note: Do not use fast charging from other brands (such as Samsung Adaptive Fast Charging) and may not interact with the Redmi Note power controller incorrectly. 10S, Which will lead to even bigger problems.

2. Forced reset (Hard Reset) when getting stuck

If the phone is hanging on the logo, doesn't respond to touch, or reboots in cycles, Hard Reset will help, which doesn't delete data, but returns the system to a working state.

Instructions for Xiaomi Redmi Note 10S:

1. Hold the Power + Volume button at the same time for 10-15 seconds.
2. When the screen goes out (or the Fastboot logo appears), release the buttons.
3. Wait 30 to 60 seconds – the phone should restart normally.

If the device freezes again after that, repeat the procedure 2-3 times, sometimes the system “wakes up” after only a few attempts.

Make sure your phone is at least 10% charged

Disconnect all cables (charging, headphones)

Press and hold the power + Volume Up

Wait 15 seconds, even if nothing happens.-->

⚠️ Important: If after Hard Reset the phone turns on, but immediately turns off, the problem may be a damaged battery or a faulty motherboard.

3. Enter Recovery Mode and Reset Settings

If standard on and Hard Reset didn't work, the next step is Recovery mode, where you can reset to factory settings or reflash your phone.

How to Sign In to Recovery on Redmi Note 10S:

1. Turn off the phone (if it is on, hold the power until vibration).
2. Press Power + Volume Up and hold until the MIUI Recovery menu appears.
3. Use volume buttons for navigation and power for selection.

The Recovery menu has options:

• 🔄 Reboot - a normal reboot.
• 📱 Wipe Data – Complete reset (deletes all data!).
• 📦 Connect with MiAssistant – Connect to a PC for firmware.

⚠️ Note: Wipe Data deletes all user data, including photos, contacts and apps. If you did not have a backup, it will not be possible to restore information!

4. Fastboot firmware (if the phone doesn't turn on at all)

If Redmi Note 10S It doesn't respond to any combination of buttons, but the computer detects it in Fastboot mode, so you can try to reflash the device, USB-cable and official firmware.

Step-by-step:

1. Download the official firmware for the Redmi Note 10S (rosemary model).
2. Unpack the archive in a folder on your computer.
3. Install the Mi Flash Tool and ADB/Fastboot drivers.
4. Connect the phone to the PC, holding Power + Volume Down (Fastboot Mode should appear).
5. Launch the Mi Flash Tool, select the firmware folder and press Flash.

It takes 5-10 minutes, and when it's done, the phone automatically restarts.

💡

If the Mi Flash Tool is an anti-rollback error, you are trying to install an older firmware version than the one on your phone, download a newer build or use EDL (requires an authorized Xiaomi account).

5. EDL emergency mode: Last chance for 'bricks'

If the phone doesn't turn on at all, isn't detected in the Fastboot, and doesn't even vibrate when you connect to a charger, then EDL (Emergency Download Mode) is the "hidden" mode for recovering devices with a damaged bootloader.

How to log into EDL:

1. Turn off your phone (if it reacts in any way).
2. Connect it to the PC via USB.
3. Close the Test Point contacts on the motherboard (disassembly required!).
4. In the Mi Flash Tool, select the firmware and press Flash.

⚠️ Warning: Regime EDL If you're not logged in to Xiaomi as a developer, the Mi Flash Tool won't let you flash your phone, and you'll have to go to the service center with an authorized account.

Also note that disassembling the phone voids the warranty. If your Redmi Note 10S is warranty, it is better to take it to the official Xiaomi service.

💡

EDL mode is the only way to recover a phone that doesn't respond to any other methods, but it does require disassembling the device and logging in to the Mi Flash Tool, making it the most difficult option.

6. Diagnostics of hardware malfunctions

If none of the software methods worked, the problem is likely hardware. Here are the most common Redmi Note 10S malfunctions and their signs:

• 🔋 Faulty battery – the phone does not charge, turns off at 20-30% charge, inflated body.
• 📱 Damaged display/ plume – screen does not turn on, but phone vibrates and is determined by PC.
• 🔌 The power button does not work – the phone only turns on when connected to charging.
• 🔥 The motherboard burned out - the phone does not respond to anything, there is no vibration, does not warm up.

For diagnosis:

1. Connect the phone to a PC – if it is defined as a Qualcomm HS-USB QDLoader 9008, the problem is the firmware (EDL will help).
2. Light a flashlight on the screen – if the image is barely noticeable, the backlight has broken.
3. Check if the phone warms up when charging - if so, perhaps short circuit.

💡 Tip: If you're unsure of your skills, don't disassemble the phone yourself.Redmi Note 10S has a fragile battery plume and thin connectors that are easily damaged.

FAQ: Frequent questions about the inclusion of the Redmi Note 10S