How to turn on Xiaomi phone: 7 working ways to do anything

Xiaomi smartphones are some of the most popular devices on the market, but even they sometimes refuse to turn on.The reasons can be different from the banal discharge of the battery to software failures after the upgrade, POCO Mi does not respond to the power button, do not rush to panic - in 90% of cases, the problem can be solved independently.

In this article, we’ll look at all the ways Xiaomi can turn on its phone, from basic methods to advanced techniques for dead devices, what to do if the screen is black, the phone vibrates but doesn’t turn on, or after the upgrade, the system is stuck on the logo, and how to avoid repeated crashes and what settings to check after a successful launch.

Important: the algorithm depends on the state of your device, for example, the Xiaomi logo that is getting stuck requires one approach, and the completely discharged one requires another, and we structured the material so that you can quickly find a solution to your situation.

1. Standard turn on: what to do if the phone does not respond to the button

So let's start with the simplest one, which is the basic switch on, and even if you think your smartphone is dead, always start with that step.

For standard inclusion, Xiaomi:

1. Connect the charger (preferably original) to the phone.
2. Wait a minute. 15-20 minutes – even if the indicator does not burn, the battery could discharge to zero.
3. Press the power button on the 10-15 seconds until you feel a vibration or see the Mi logo.
4. If the screen catches fire but the phone is off again, try again in 5 minutes.

⚠️ Warning: If the phone heats up after charging, but doesn't turn on, it may indicate a battery or power controller malfunction, in which case further attempts to turn on may exacerbate the problem.

On models with removable battery (for example, Redmi) 3S/4A) try:

• 🔋 Remove the battery for 30 seconds, then insert back and Attempt switch on.
• 🔌 Connect charging without battery – if the phone reacts, the battery is the problem.
• 🔄 Try another battery (if available).

2. Forced reboot: When the phone is stuck on startup a logo or black screen

If Xiaomi smartphone vibrates when you press the power button, but the screen remains black or hangs on the logo Mi/POCO, It's probably a software failure, and in this case, it's a hard reset).

Instructions for most models:

1. Press the Power button. + Volume Up (volume up) on 20-30 seconds.
2. Release the buttons when the screen goes out (or the Fastboot menu appears).
3. Wait. 1-2 Try to turn on your phone in the usual way.

For models with a Bixby button (e.g. Mi 11 Ultra):

Power + Volume Up + Bixby (hold 15 seconds)

⚠️ Warning: If after a hard reboot, the phone loads into Fastboot mode, don't try to exit it with buttons, it can cause a data reset. Instead, disconnect the phone from charging, retrieve it. SIM-card (if possible) and try again in 5 minutes.

If the phone is cyclically restarted (hangs on the logo) → reboot → The logo again, that indicates:

• 📱 Damaged firmware (especially after air updates).
• 🔋 Faulty battery (if the charge drops to 0% and the phone turns off).
• 🛠️ Hardware failure (for example, memory chip dump).

Check if the charger is working (try charging another phone)

Make sure the cable is not damaged (bend it at the base)

Turn off all accessories (earphones, memory cards)

Try another power outlet or power source-->

3. Enable via charging: what to do if the phone is discharged to zero

One of the most common scenarios is that Xiaomi is down to 0% and doesn’t respond to charging, in which case a standard cable connection may fail due to a deep battery drain.

Algorithm of action:

1. Use the original charger (or with Quick Charge support) 3.0/4.0).
2. Connect the phone to the charger and leave it on 30-60 minutes without trying.
3. In an hour, try to clamp down the Power. + Volume Up for 10 seconds.
4. If the charging indicator doesn’t light up, try another cable or power supply.

To speed up the process on some models (Redmi Note 10 Pro, POCO X3 Pro, the next trick works:

• 🔌 Connect the charger.
• 📱 Hold the Power. + Volume Down for 15 seconds.
• 🔄 Release the buttons, then press the Power once.

⚠️ Attention: if after an hour of charging the phone remains cold (not even slightly warmed), this may indicate a break in the power chain or a malfunction of the charging controller.

On models with removable battery (Redmi) 4X, Redmi 5A) Try to wake up the battery:

1. Remove the battery for 1 minute.
2. Connect the charger without a battery.
3. Insert the battery back without turning off the charging.
4. Wait 10 minutes and try to turn on the phone.

💡

If you have a power bank, try charging your phone from it instead of an outlet – sometimes it helps to wake up a deeply drained battery.

4.Enable via Fastboot mode: for advanced users

If Xiaomi’s phone turns on but immediately goes into Fastboot mode, it means that the system can’t boot normally, and this can happen after:

• 📲 Failed firmware update.
• 🔧 Incorrect rooting or unlocking the bootloader.
• 🛠️ Hardware failure (e.g., damage to boot partition).

To exit Fastboot and try a normal download:

1. Turn off the phone from charging.
2. Press the Power button on 20-30 seconds until the screen goes out.
3. Wait 1 minute and try to turn on the phone in the usual way.

If the phone gets back into Fastboot, you'll need to flash it again.

1. Download the official firmware for your model from the Xiaomi Firmware website.
2. Install Platform Tools (includes fastboot and adb).
3. Connect your phone to your PC, open the command line in the platform-tools folder, and do:

fastboot devices


fastboot flash boot [name file boot.img]




fastboot reboot

⚠️ Attention: if you are not sure of your actions, do not ask for your phone through fastboot without a backup - this can lead to complete loss of data.

For models with a locked bootloader (Xiaomi blocks it by default), it will be necessary to unlock through the Mi Unlock Tool before firmware.

5. Enable via Recovery Mode: Resetting and Recovery

If the Xiaomi phone turns on but doesn’t load beyond the logo, or reboots cyclically, logging into Recovery mode will help.

• 🔄 Reset the settings to factory (Wipe Data).
• 📁 Install an update from a memory card.
• 🔧 Check the integrity of system files.

To enter Recovery:

1. Turn off the phone (if it's on, press the Power for 10 seconds).
2. Press Power + Volume Up and hold until the Mi logo appears.
3. Release the buttons when you see the Recovery menu (usually in Chinese or English).

On the Recovery menu:

• 📱 Reboot → System – attempt at normal booting.
• 🔄 Wipe Data → Wipe All Data – Complete reset (deletes all data!).
• 📂 Install Update – Install firmware with SD-map.

⚠️ Warning: If you choose Wipe All Data, the phone will return to factory settings and all data (photos, contacts, messages) will be permanently deleted!

If Recovery offers to upgrade, but you do not have a firmware file:

1. Download the official firmware for your model (.zip format).
2. Put the file in the root SD-card or internal memory (if the phone is defined as a storage device).
3. In the Recovery menu, select Install Update → point the way to the file.

In some models (POCO F3, Redmi K40) Recovery can be in Chinese:

💡

If the phone does not turn on again after resetting in Recovery, the problem is most likely hardware (damaged motherboard or battery).

6. Hardware problems: when the phone is not turned on due to a breakdown

If none of the software methods worked, it could be a hardware malfunction.

1. Faulty battery

• 🔋 The phone heats up when charging, but does not turn on.
• 📉 Charge drops from 50% to 0% in a few minutes.
• 🔌 The charging indicator flashes red or does not burn at all.

Solution: battery replacement (cost for Xiaomi – from 1,500 to 4000) ₽ model-wise).

2. Damaged motherboard

• 💥 Phone fell or was hit.
• 🌡️ Overheating (for example, after playing or charging).
• 💦 Infection of moisture (even if there are no traces of it externally).

Solution: diagnostics in the service center (costs 3,000–10,000 to repair) ₽).

3. Faulty charging connector

• 🔌 The phone is charged only in a certain position of the cable.
• 🔋 Charging is interrupted if you move the wire.
• 📱 The phone does not respond to the original charger.

Solution: Replace the connector (from 1000 to 2,500) ₽).

4. The chip dump

• 🛠️ Phone turns on, but screen doesn't work (backlights are, no images).
• 📡 There is no Wi-Fi or network, but antennas are intact.
• 🔊 The speaker or microphone is not working.

Solution: soldering of chips (from 2 000) ₽, depending).

⚠️ Note: if the Xiaomi phone fell into the water, even if it worked afterward, corrosion could damage the contacts.In this case, do not try to turn it on - this can cause a short circuit.

For self-diagnosis:

1. Try to turn on the phone without SIM-memory-cards.
2. Connect to a PC – if the computer makes a connection sound, but the phone is not detected, the problem is in the firmware or bootloop.
3. Light a flashlight on the screen - if you see a dim image, the illumination is faulty.

7.Prevention: How to avoid inclusion problems in the future

To ensure that your Xiaomi does not refuse to turn on, follow these recommendations:

1. Proper charging

• 🔌 Use original or certified chargers.
• 📵 Do not leave your phone on charge all night (optimally until the end of the day). 80-90%).
• 🌡️ Avoid overheating (do not charge in direct sunlight).

2. Updates and firmware

• 📲 Install updates only through official channels (Settings) → The phone. → Updating the system).
• 🔧 Do not use custom firmware unless you are sure of its stability.
• 📡 Before updating, check the reviews on the forums (for example, 4PDA).

3. Physical protection

• 🛡️ Use a cover and protective glass.
• 💦 Avoid getting moisture (even Xiaomi with protection) IP53 not designed for swimming).
• 📦 Do not put your phone in your back pocket (risk of breaking when falling).

4. Backup

• ☁️ Set up automatic backup in Mi Cloud (Settings) → Xiaomi account → Mi Cloud → Backup).
• 📂 Periodically copy photos and videos to a PC or external disk.
• 🔑 Save it. IMEI phone (printed on a box or seen in *#06#).

⚠️ Attention: If your Xiaomi is overheating or discharges quickly, this could be a sign of battery wear. → Battery. → Battery status. If the capacity has dropped below 70%, consider replacing it.

💡

Turn on Developer Mode and activate the option Do not turn off the screen when charging (Settings) → Additionally. → This will help to avoid accidental discharge during firmware or updates.

FAQ: Frequent questions about Xiaomi inclusion