Lost or broken remote from Xiaomi Mi TV 4S? Don't panic, you can turn on your TV and control it even without the original remote. In this article, we'll look at all the working methods, from hidden hardware buttons to using your smartphone as a replacement. It's important to understand that the process of turning on depends on the model and year of your Mi. TV 4S, But the basic principles are universal for the entire line.
The first thing you need to do is check if the battery is dead in the remote (if it just doesn't work for you). Try replacing the batteries or putting the remote close to the TV - sometimes the signal doesn't pass due to interference. If the remote is really lost or broken, read on. We've put together 5 proven methods, including emergency options for cases when the TV doesn't respond to anything.
Note that some methods require pre-configuration (e.g., Wi-Fi connection to control from a smartphone). If the TV is turned off completely, start with hardware buttons - they work even without power. TV 4S 32"-65" (2018-2023) instructions are identical, but button locations may differ.
1. Including through hardware buttons on the body
All Xiaomi Mi TVs TV 4S They're equipped with hidden mechanical buttons that duplicate the basic functions of the remote, and they're located on the bottom or side panel of the case (usually under the Mi logo or side:
- 🔍 Location: In 2018-2020 models, the buttons are hidden under a small plastic cover on the right (when you watch the TV from the front.
- 🔘 Button functions: Power - on/off (usually the middle button); Menu or Home - call the main menu. ± — volume control. Source/Input — switching.
- ⚡ How to press: Use a thin object (pen, paper clip) if the buttons are drowned. Press clearly and forcefully - tactile response is weak.
If the TV does not respond to the pressing:
⚠️ Warning: Make sure the TV is plugged into the outlet without the network filters, which can block current in standby mode.
Find the buttons on the case (see the instructions above)|Make sure the TV is connected to the network directly|Press and Hold Power 5-10 Seconds|If there is no reaction, check the power cable.-->
| Model Mi TV 4S | Location of buttons | Button type |
|---|---|---|
| Mi TV 4S 32" (2018–2019) | Right, under the lid. | Mechanical, drowned |
| Mi TV 4S 43"–55" (2020) | Right, no lid. | Sensory (Christmas) |
| Mi TV 4S 50"–65" (2021–2023) | Left, on the end. | Mechanical, protruding |
| Mi TV 4S Pro (all diagonally) | Back, near the ports | Sensory + mechanical |
If the buttons are found, but the TV is not turning on, the power surge protection may have gone off.
- Turn off the TV for 1 minute.
- Press and hold the Power button for 15 seconds (discharge the capacitors).
- Connect the power and try to turn it on again.
2. Control via the Mi Remote application (smartphone)
If the TV is on but you don't have a remote, the most convenient solution is Xiaomi's official Mi Remote app, which converts your smartphone into a full-fledged remote control with all the features including voice search and Smart Home setup.
- 📱 Installation: Download Mi Remote for Android or iOS. The app is free but requires registration with Mi Account.
- 🔗 Connection: Make sure that the TV and smartphone are connected to the same Wi-Fi network. in the app, select Add Device → Television → Xiaomi.
- 🎯 Sync: Point your smartphone camera at your TV screen (to determine the model). If the TV is turned off, turn it on with the Power button on the case, then connect.
An important caveat: if the TV has not previously been connected to Wi-Fi, this method will not work, in which case, first set up the network through hardware buttons (section 3).
- On TV, the mode is Do not disturb (turns off with buttons on the case).
- The smartphone is connected to the guest network, and the TV is connected to the main (and vice versa).
- Multicast protocol is disabled in the router (you need to enable in the router settings).
💡
If Mi Remote can't find the TV, try manually entering it. IP-You can find it through the router menu (section "Connected devices").
Advantages of this method:
- ✅ Full access to all features (including Google Assistant and PatchWall).
- ✅ Control from the other end of the room (range up to 10 meters).
- ✅ Gesture support (e.g. swipe to switch channels).
⚠️ Attention: On Mi TVs TV 4S Firmware older than 2021 may require a software update to work correctly Mi Remote. → On TV.
3. Connection USB-keyboard
Few people know, but Xiaomi Mi TV 4S Supports the connection of peripheral devices through USB-This allows you to control the TV with a keyboard or mouse, like you would on a computer, and it's particularly useful if you wanted to:
- 🖱️ Set up Wi-Fi or perform a reset to factory settings.
- 🔧 Install firmware updates manually.
- 📁 Run files from a flash drive (for example, videos or music).
Step-by-step:
- Connect. USB-keyboard USB 2.0 on the TV (usually side or back).
- If the TV is turned off, turn it on with the Power button on the case.
- Wait for the system to load – in 10-15 seconds the mouse cursor or keys should work.
- Use: Keyboard arrows — move through the menu. Enter — select item. Esc — go back. Win + D - access to the main screen.
USB-The devices work even if the TV is not connected to the Internet or reset to factory settings, and this is one of the most reliable ways to control emergencies.
Which keyboards are supported?
| Action. | Key/combination | Note |
|---|---|---|
| Switching on/off | Power (if available on the keyboard) or Alt + F4 | On some keyboards, the Power button may not work. |
| Open the menu | Menu or Win | The analogue of the Home button on the remote. |
| Volume control | F11 (quietly), F12 (louder) | It doesn't work on all firmware. |
| Remove the source | F5 Ctrl + S | Analogue of the Source button. |
4.Use of the universal remote control
If you have a universal remote (for example, from Samsung, LG Cheap Chinese, it can be programmed to control the Xiaomi Mi TV 4S. This method is suitable when there is no possibility to use a smartphone or USB-device.
How to set up a universal remote:
- Turn on the TV with the Power button on the case.
- On the universal remote, press and hold the Setup (or Set) until the indicator blinks.
- Type the code for Xiaomi. Try these options: 1263, 1178 for One For All. 0178, 0135 for Huayu. 10178 for 5-digit remotes.
Power
Setup
If none of the codes worked:
- 🔄 Try autosearch: Hold Setup, then press Power every 2 seconds until the TV responds.
- 📋 Check the list of codes for your remote model on the manufacturer’s website.
- 🔋 Replace batteries in remote control – weak signal may interfere with synchronization.
⚠️ Note: Universal remotes often do not support voice search and special buttons (for example, Netflix or Prime Video.
The original Xiaomi remote|Mi Remote appendix|USB-keyboard|Universal remote control|Another option-->
5. Resetting to factory settings (if nothing helps)
If the TV doesn't respond to any of the methods, there may be a software error, in which case a hard reset will help, which will return all the settings to the factory, but delete:
- 📺 Installed applications (except pre-loaded ones).
- 🔐 Google and Mi Account Accounts.
- 📡 Wi-Fi settings and network settings.
How to reset:
- Turn off the TV.
- Press and hold the Power button on the body. + Volume button - (reduce volume).
- Without releasing the buttons, connect the TV to the outlet.
- Hold the buttons for another 10-15 seconds until the Mi logo appears.
- Release the buttons – the reset process will begin (it will take 2-5 minutes).
After resetting, the TV will turn on in initial settings.
- Choose a language and region.
- Connect to Wi-Fi (if you need to manage via Mi Remote)
- Sign in to Mi Account (optional).
What if the reset didn't help?
⚠️ Attention: On Mi models TV 4S 2022-2023 button resets can be blocked. Use the menu: Settings → The device → Resetting and remediation → Resetting (needed) USB-keyboard).
6. Alternative methods (for experienced users)
If standard methods don't work, you can try more complex solutions, which require technical skills, but sometimes save in desperate situations.
6.1 Management through ADB (Android Debug Bridge)
If the TV is on and connected to the same network as the computer, you can control it through the computer. ADB. It'll help:
- 🖥️ Install apps bypassing Google Play.
- 🔧 Execute commands for reset or reset.
- 📱 Emulate remote presses.
Instructions:
- Download ADB Tools and unpack it into a folder.
- Turn on the TV to debug. USB (through USB-keyboard: Settings → On TV. → Build Number – Press 7 times, then return to Settings → For developers → Debugging by ADB).
- Connect your TV and computer to the same network.
- In the command line (Windows: cmd) type: adb connect [IP-TV address]:5555 adb shell input keyevent 26 (where 26 — power button).
6.2. Flashing through USB
If the TV is not turned on due to damaged software, you can install the firmware manually:
- Download the official firmware for your model from the Xiaomi support site.
- Unpack the archive and copy the update.zip file to the flash drive (FAT32 format).
- Put the flash drive in. USB-television-port.
- Press and hold the Power. + Volume - on the case, then connect the power.
- Release the buttons when the update starts (don’t turn off the TV!).
💡
Flashing through USB — The wrong firmware file can permanently disable the TV. Use only official versions from Xiaomi!