How to go to Recovery Mode on Xiaomi Redmi: 3 proven ways

Recovery Mode on Xiaomi Redmi smartphones is a utility tool that allows you to perform critical operations: reset to factory settings, install custom firmware or restore the system after a crash. However, improper use of this mode can lead to data loss or even “bricking” of the device. In this article, we will discuss all the current ways to log into Recovery Mode for Redmi models from Note 4X to Redmi 13C, including nuances for devices with a locked bootloader.

It is important to understand that the login procedure may differ depending on the version of MIUI and the type of recovery installed: standard (Stock Recovery) or custom (TWRP/CWM).We will consider both options, as well as alternative methods through ADB and Fastboot for cases where hardware buttons do not respond. If you plan to manipulate the firmware, be sure to back up data via Mi Cloud or locally, as some operations in the backup lead to the complete deletion of user files.

1. Standard method: login through hardware buttons

This is the most versatile method, working on 90% of Xiaomi Redmi devices regardless of the MIUI version. Suitable for smartphones with physical power and volume buttons, including Redmi 9A, Redmi Note 10 Pro and later. The main condition is that the device must be turned off (or forced to turn off by holding the power button for a long time).

Algorithm of action:

1. Turn off your smartphone completely (if it freezes, hold the power button for 10-15 seconds).
2. Press the button combination: 🔘 Power button + 🔊 Volume up button (for most models) 🔘 Power button + 🔊 Volume down button (for Redmi) 5/5A some old devices)

Mi

Recovery Mode

If after several attempts the entrance fails, check:

• 🔋 Is the battery discharged (minimum 30% of the charge is required for stable operation of the recaveri).
• 🔌 Is the phone connected to charging (in some models, this blocks the entrance to the Recovery).
• 🛠️ Are hardware buttons damaged (try to move them gently – sometimes helps).

Turn off your smartphone completely | Check battery power (minimum 30%) | Turn off the charging cable | Make sure the volume and power buttons are up and running-->

⚠️ Attention: On devices with MIUI 13/14 And later, when you first log in to Stock Recovery, you may need to enter a password from your Mi Account if you have previously activated the Anti-Rollback security mechanism.

2. Alternative method: login via Fastboot

If the hardware buttons don't work or the device doesn't respond to the standard combination, you can log into Recovery Mode via Fastboot mode. This method requires a computer with ADB/Fastboot drivers installed and USB debugging enabled on the smartphone (if it's still on), Suitable for Redmi K40, Redmi Note 11 and others with Fastboot support.

Step-by-step:

1. Connect your smartphone to your PC through USB-cable (preferably original).
2. Click the combination to log into Fastboot: 🔘 Power button + 🔊 Volume down button (hold 10-15 seconds).

Fastboot

cmd

fastboot boot recovery

or for new devices with split Recovery:

fastboot boot recovery.img

Recovery Mode

If the command doesn’t work, try an alternative:

fastboot oem reboot-recovery

💡

If your device doesn’t show up after the fastboot device command, install the Mi Flash Tool drivers or use the universal Google USB Driver.

3. ADB Entry (for power users)

The ADB method is suitable if the smartphone is turned on, but the standard button combination does not work (for example, due to a software failure). Requires pre-enabled debugging over USB in the developer settings (Settings → About Phone → MIUI version – press 7 times, then return to Additional settings → For developers).

Instructions:

1. Connect your smartphone to your PC and confirm the debugging permission on the device screen.
2. In the command line, type: Adb devices Make sure your device appears in the list.
3. Reboot Recovery Command: Adb Reboot Recovery

⚠️ Note: On Dynamic Partition devices (all Redmis on Android) 10+) Operations with super or vendor partitions through non-castom recavers cause permanent damage to the system. TWRP supportive dynamic_partitions.

7 How to Get Out of Recovery Mode

If you have completed all the necessary operations, exiting the recovery mode is simple:

1. In Stock Recovery, select Reboot system now using volume buttons and confirm the choice with the power button.
2. In TWRP, press Reboot → System.

If the smartphone does not respond to commands or freezes:

• 🔘 Hold the power button for 15-20 seconds for forced reboot.
• 🔌 If the device is connected to the PC, run the command: fastboot reboot

If after leaving the recovery, the device does not boot (hangs on the Mi logo):

• Repeat the entrance to the Recovery and perform the Wipe cache partition.
• If the problem persists, run the stock firmware through the Mi Flash Tool.

FAQ: Frequent questions about Recovery Mode on Xiaomi Redmi