How to Turn on Xiaomi TV P1 32: All the ways from the button to system recovery

Xiaomi TV P1 32 – a popular model with support for Smart TV Google-based TV, But even with a device that's modern, you sometimes have problems turning on, you press the power button and the screen stays black, or the TV freezes after the upgrade and doesn't respond to the remote? This article will help you understand all the nuances - from basic start-up methods to restoring operability after failures.

We will look not only at standard ways of inclusion (button, remote, voice), but also at rare cases when Xiaomi is not the only one. P1 32 doesn't turn on after a power spike, a firmware update, or a setting reset. We'll focus on the hidden reset button on the back that many users don't know about. If you've tried all the obvious methods, here's a solution for complex situations.

At the end of the article — FAQ answering frequent questions: why the TV turns off itself, how to turn it on without a remote, and what to do if after the update there is a black screen with the Mi logo.

1. Standard on: button and remote

The most obvious way is to use a power button on the case or a remote control, but even here, there are nuances that many people don't know about.

Xiaomi. P1 32 physical power button is located on the right side panel (when you watch the TV from the front) and it is combined with a status indicator:

• 🔴 Red light: The TV is off but connected to the network.
• 🟢 Green lights - TV on.
• 🔵 Blue flashing – standby mode or software update.

If the indicator doesn't burn at all - check the power cable and outlet. P1 32 is sensitive to voltage surges, so it is recommended to use a network filter or uninterruptible power supply (UPS).

With the remote control, there may also be problems:

• 🔋 Check the batteries (even if they are new – contacts may have oxidized).
• 📶 Make sure there are no obstacles between the remote and the TV (glass, metal).
• 🔄 Reboot the remote: Remove the batteries for 30 seconds, then insert back.

💡

If the remote doesn’t work, try controlling the TV through the Mi Remote app (available for Android and iOS).

2. Incorporation after update or failure

If you have a Xiaomi TV P1 32 freezes after updating the firmware or suddenly turns off while working, the standard press of the power button may not work.

Try a hard reset first:

1. Turn off the TV (remove the plug from the socket).
2. Wait 1 minute (this is important – the capacitors should run out).
3. Press and hold the power button on the case for 10-15 seconds.
4. Without releasing the button, connect the power back.
5. Wait until the loading (can take up to 5 minutes).

If the TV doesn't turn on after that, there may have been a firmware failure, and then the recovery mode will help:

• 🔌 Turn off the TV.
• 🖱️ Press and hold the Menu button on the remote (or the side button on the body).
• 🔌 Connect the power without releasing the button.
• 🖥️ Wait for the recovery menu to appear (it can take up to 2 minutes).

In the Restore Menu, select Reboot system now or Wipe. data/factory The latter option will remove all installed applications and settings, but often helps with serious failures.

3.Hidden reset button on the back

Few people know, but on the back of Xiaomi P1 32 has a hidden reset button that helps bring the TV back to life if it has completely stopped responding to commands, and this button is usually hidden under a small rubber plug or next to the connector. AV.

How to use it:

1. Turn off the TV.
2. Take a thin object (a toothpick, a paperclip) and press the reset button for 10-15 seconds.
3. Put the power back on.
4. Press the power button on the body or remote.

This button does a hardware reset, similar to the battery extraction on a smartphone. It doesn't delete data, but it resets temporary settings that might have caused the freeze.

💡

The hidden reset button is the last chance to bring the TV back to life if it doesn't respond to the remote, power button or network connection. Use it only in extreme cases, as frequent resets can cause wear and tear on the chips.

If after pressing the hidden button, the TV turned on, but it works unstable (spontaneously turns off, brakes), it is recommended to reset to factory settings through the menu: → The device → Reset → Reset all settings.

4. Enable via Mi Home or Google Assistant

If physical methods don’t work, you can try to turn on the TV remotely via your smartphone, so you need to connect to the same Wi-Fi network as your phone and have a Xiaomi or Google account tied.

Method 1: Through Mi Home

• 📱 Open the Mi Home app on your smartphone.
• 🔍 Find your TV in the device list (it can show as Mi). TV P1).
• 🔄 Click on the power icon in the device card.

Method 2: Google Assistant (if your TV is linked to your Google account)

• 🎤 Say the voice command, “OK, Google, turn on Xiaomi.” P1 32».
• 📱 Or open the Google Home app, select the TV and click “Enable».

If the TV is not displayed in apps, check:

• 🔌 Is it connected to a Wi-Fi network (the indicator on the case should flash blue).
• 🔄 Have you lost your network settings after the failure (try to connect again).
• 🔐 Have you logged out of your Xiaomi or Google account on your TV.

💡

If the TV doesn't respond to commands from apps, but the indicator is blue, try disconnecting it for 30 seconds, then turning it on again, sometimes helping to restore the network connection.

5. Diagnostics of malfunctions: why the TV is not turned on

If none of these things worked, the problem could be hardware, and here's the table with the most frequent malfunctions and their signs.

If you have a Xiaomi TV P1 32 is turned on but no image is available, try connecting an external signal source (e.g, HDMI-If the external signal is displayed, the motherboard or firmware is the problem. If not, the matrix or backlight may be faulty.

💡

If the TV makes sounds (for example, Google screensaver) TV It's a playable device, but it's still black -- the problem is exactly the backlight or the matrix plume.

You can use a service menu to diagnose hardware problems.

1. Turn off the TV.
2. On the remote, press sequentially: Menu → 1 → 3 → 9 → Menu.
3. Turn on the TV with the power button.

In the service menu, you can check the status LED-Be careful, the settings are wrong, and you can break them!

6. Flashing the TV through USB

If you have a Xiaomi TV P1 32 is stuck on the logo or cyclically rebooting, you may need to manually flash it:

• 💾 Flash drive. FAT32 up to 16 GB.
• 🖥️ Official firmware for Mi TV P1 32 (you can download it from Xiaomi Support website).
• ⚡ Uninterruptible power supply (to avoid process breakdown).

Firmware instructions:

1. Download the firmware and unpack it on a flash drive (the file should be called). update.zip).
2. Put the flash drive in. USB-TV-port.
3. Press and hold the Menu button on the remote + power button on the body.
4. Connect the power without releasing the buttons.
5. Wait for the update menu to appear and select Update from USB.

The firmware process takes 5-15 minutes. Don't disconnect the TV from the network or remove the flash drive until it's complete! Once the update is complete, the TV will reboot automatically.

If the TV doesn’t work after the firmware, check:

• 📁 Correctness of the firmware file name (should be accurate) update.zip).
• 💽 Flash drive format (only) FAT32, others not supported).
• 🔌 Integrity USB-Port (try another port or flash drive).

7. Contacting the service center: when necessary

If all of these methods didn't work, it's probably a hardware problem, and here are some signs you should go to the service.

• 🔥 The TV smells like a burn or gets very hot.
• 💥 After switching on, clicks or cracks are heard.
• 🖥️ Vertical/horizontal stripes appear on the screen.
• 🔌 The TV turns on but immediately turns off (the cycle repeats endlessly).

Xiaomi’s official service centers in Russia and the CIS can be found on the Xiaomi support website.

• 📋 Write down the TV serial number (located on the back sticker).
• 📸 Take a picture of the check or warranty card (if it is saved).
• 🔄 Try resetting to factory settings (this can save diagnostic time).

The average cost of repair Xiaomi P1 32 in 2026:

• Replacement of the power supply: 2,500–4,000 ₽.
• Motherboard repairs: 3,000–6,000 ₽.
• Replacement of the matrix: 8000–12000 ₽ (often unprofitable).

💡

If the TV is guaranteed, do not open the case yourself - this will void the warranty.

8. Prevention of inclusion problems

To avoid problems in the future, follow these guidelines:

• 🔌 Use a network filter or UPS to protect against voltage surges.
• 🧹 Clean the air vents from dust regularly (every 3-6 months).
• 🔄 Don’t turn the TV off too often – it can damage the capacitors.
• 📥 Update the firmware only through a stable Internet connection (preferably by cable).

It is also helpful to set up an automatic update, but only at night when the TV is not in use: → The device → Updating the system → Auto-update.

If you use it often HDMI-devices (configures, sound panels), avoid hot connections – always turn off the TV before connecting / disabling cables.

💡

The most common reason for Xiaomi breakdowns P1 32: Power surges and overheating, and proper nutrition and cooling will extend the life of the TV by 30 to 50%.

If the TV is not used for a long time (for example, in the country), store it in a dry place with a temperature of 5-35°C and humidity not higher than 60%. Before a long downtime, it is recommended to reset the settings and disconnect from the network.

FAQ: Frequent questions about Xiaomi inclusion P1 32