Root rights to Xiaomi Redmi Note 7: a complete guide from unlock to Magisk

Getting root rights to Xiaomi Redmi Note 7 (codename lavender) remains a topical topic even in 2026, despite the tightening of Xiaomi’s security policy and the release of new versions of MIUI. This smartphone, released in 2019, is still in demand due to balanced characteristics: Snapdragon 660 processor, 3/4 GB of RAM and battery 4000 mAh. However, factory firmware imposes a number of restrictions – from the inability to remove system applications to lock deep customization.

In this article, we will discuss three officially supported root-rights methods relevant to MIUI 12/13/14, including bypassing new bootloader checks. It is important to understand that the procedure involves risks ranging from loss of warranty to device blinking if you do not act correctly. We will focus on backup preparation, TWRP and Magisk versions, and the nuances of working with fastboot and ADB. If you are a beginner, we recommend that you carefully study each step and not miss warnings.

⚠️ Attention: Starting with MIUI 13, Xiaomi has implemented the mechanism Anti-Rollback (ARB), It blocks rollbacks to older versions of firmware. ARB This will lead to an irreversible device brik. ARB in settings (Settings) → The phone. → Version. MIUI) Check the compatibility table below.

1.Device preparation: backup, drivers and OEM unlocking

Before you start unlocking the bootloader, you need to follow three critical steps: back up your data, install ADB/Fastboot drivers, and activate developer modes. Missing any of these steps can result in the loss of personal files or inability to continue the procedure.

Start with a backup of important data. Use Mi Cloud to sync contacts and notes, and for media files and applications, Google Photos and Titanium Backup are suitable (the latter requires temporary root access, which can be obtained through Magisk in RAM). Note that after unlocking the bootloader, a full reset will occur, so the backup should be as full as possible.

Next, install drivers to work with fastboot. For Windows, download the official Mi Unlock Tool package from Xiaomi's site - it will automatically install the necessary drivers. Linux/macOS You only need the Android-tools-adb package (installed through the package manager:

adb devices


fastboot devices

If the commands return the serial number of the device, the drivers are installed correctly, otherwise reinstall them manually through Device Manager (for Windows).

• 📱 Activate Developer Mode: Go to Settings → About the phone and 7 times click on the version MIUI. You will receive a notification saying, “You are a developer".
• 🔓 Unlock. OEM: Settings menu → Additionally. → For developers, enable debugging options by USB and Unlock. OEM.
• 🔌 Connect the device to the PC: Use the original cable USB Type-C: Cheap analogues can cause data transmission errors.

⚠️ Attention: Unlock option OEM It may disappear after rebooting on some versions. MIUI 14. If this happens, go back to the developer settings and turn it back on immediately before you start unlocking the bootloader.

2 Unlock the bootloader through the Mi Unlock Tool

Xiaomi officially allows unlocking the bootloader, but the process is complicated by account verification and latency. On the Redmi Note 7 with MIUI 12+, the minimum wait time is 7 days (168 hours) after the account is linked to the device.

Download the latest version of the Mi Unlock Tool from the official website (at the time of writing, version 5.5.224.24 is current).

• 📋 Your Mi Account is linked to your device (check Settings). → Xiaomi account).
• 🕒 It’s been 168 hours since the first binding (checked by Xiaomi servers).
• 📶 The device is connected to the Internet via a mobile network or Wi-Fi (without any connection) VPN!).

Launch Mi Unlock Tool on behalf of the administrator (for Windows), log in under the same account as your phone, and follow the instructions of the program. During the device check phase, the phone will reboot to fastboot mode. If the process ends with a Couldn't unlock error, check:

After successful unlocking, the bootloader will remain unlocked even after resetting the settings, but when installing custom firmware, it may be necessary to re-unblock after 30 days.

3. Installation of custom TWRP Recovery

To install Magisk and obtain root rights will require custom recavery — TWRP. For the Redmi Note 7 (Lavender) current version 3.7.0_12-0 from the developer mauronofrio, which supports data encryption and correctly works with the MIUI 14. Download the image of the recaveri (.img) from the official website TWRP.

Installation is done via fastboot. Connect your phone to your PC in fastboot mode (turn off the device, then press Power + Vol−), open the terminal in the folder with the downloaded twrp.img and do:

fastboot flash recovery twrp-3.7.0_12-0-lavender.img


fastboot boot twrp-3.7.0_12-0-lavender.img

The second team temporarily loads TWRP without writing to the recovery section, which avoids replacing the custom Recovery with stock at the first reboot. TWRP perform the following actions:

Swipe to allow modifications | Go to Wipe → Format Data and type yes|Reboot to Recovery (not in the system!) | Connect to your PC and copy Magisk.zip

-->

Formatting the Data partition will delete all user data, but this is necessary to prevent getting stuck on the MIUI logo after installing Magisk.If you miss this step, the system may not boot!

⚠️ Attention: On some firmware MIUI 14 The stock receptacle automatically recovers after rebooting, so to avoid this, immediately after installation. TWRP copy the file disable_miui_anti_rollbacks.zip (forum-available XDA) and run it through Install in TWRP.

4.Install Magisk and obtain root rights

Magisk is a universal tool for obtaining root rights without modifying the systemless root. Redmi Note 7 is recommended version 26.4 or later, as it supports MIUI 14 and bypasses SafetyNet checks. Download the latest stable release of Magisk-v26.4.zip from GitHub.

In TWRP, follow the following steps:

1. Press Install and select the downloaded Magisk-v26.4.zip.
2. Add to the installation disable_miui_anti_rollbacks.zip (unless you've done it before).
3. Swipe to confirm installation.
4. After completion, press Reboot System.

The first download can take up to 10 minutes, which is normal. After you start, install the Magisk Manager app (available as an APK on GitHub) and check the root rights status in the Superuser section. If there is a green tick next to the Magisk sign, the procedure was successful.

How to check the validity of root rights? Install the Root Checker app from Google Play or perform in the terminal:

su

If an invitation to # appears after entering the command, the root access is active.

💡

To hide root rights from banking applications (such as Sberbank Online), activate the MagiskHide option in Magisk and add the applications to the hide list.

5. Solving common problems

Even with the correct following of the instructions, users often encounter errors, and let's look at typical scenarios and how to fix them.

5.1 The device hung on the MIUI logo

Reason: Data partition formatting in TWRP or Magisk module conflict is not executed.

1. Download to TWRP (Power + Vol+).
2. Run Wipe → Format Data (enter yes).
3. Reinstall Magisk.zip.

5.2 This package is for lavender devices in TWRP

Reason: the wrong Magisk file was downloaded (for example, for another model) Solution: download only the version for arm64 (the file name should be arm64-v8a).

5.3 SafetyNet fails to pass inspection

Reason: MagiskHide is inactive or incompatible modules are installed.

• Open Magisk Manager → Settings → turn on MagiskHide.
• Remove all modules in the Modules section.
• Reset the device.

6. Alternative methods of obtaining root

If the standard TWRP and Magisk method is not suitable, consider alternatives.

• 🔄 bootloader is locked and waiting 168 hours is impossible.
• 📱 Device warranty, and physical unlocking is undesirable.
• 🛠️ Temporary root access is required for a specific task (e.g. backup) NVRAM).

6.1 Temporary Route via Magisk in RAM

The method allows you to obtain root rights without modifying the system partitions.

1. Download. Magisk-v26.4.zip and rename in magisk_patched.img.
2. In the terminal, do: adb push magisk_patched.img /sdcard/ adb shell su dd if=/sdcard/magisk_patched.img of=/dev/block/bootdevice/by-name/boot
3. Restart the device – the root will be active until the next reboot.

Unlocking through EDL (Emergency Mode)

This method is risky and can lead to a blink, only used if the loader is damaged.

• 🔧 Qualcomm HS-USB QDLoader 9008 driver.
• 📄.mbn firmware for Redmi Note 7.
• 💻 Mi Flash Tool or QFil.

For detailed instructions, look for XDA Developers in the EDL Unbrick theme. Use this method only if other methods have not worked, as it requires soldering test points on the board.

💡

Alternative methods should only be used as a last resort, and the standard procedure with TWRP and Magisk remains the most robust and community-supported.

7. Optimize the system after obtaining root

Root rights give you access to the Redmi Note 7 deep setup, and here are some useful changes you can make:

7.1. Delete system applications (bloatware)

List of safe to remove applications (do not delete com.android.*!):

com.miui.analytics


com.xiaomi.ab




com.miui.bugreport




com.xiaomi.joyose




com.miui.hybrid

Use Titanium Backup or the command to delete:

pm uninstall -k --user 0 com.miui.analytics

Optimization of productivity

Install Magisk modules to improve the work:

• 🚀 Universal SafetyPatch – bypasses SafetyNet restrictions.
• 🔋 Battery Charge Limit – Limits battery life to 80.
• 🎮 Game Optimizer Disabler – Disables the Aggressive Restriction FPS play.

Core adjustments

For fine-tuning the processor and GPU, use Kernel Adiutor or FrancoKernel Manager. Recommended settings for the Snapdragon 660:

• 🔄Governor: schedutil (for balance of performance and energy consumption).
• 🔥Maximum frequency CPU: 1958 MHz (stock).
• ❄️Minimum frequency CPU: 300 MHz (for saving charge).

8 Security and Restoration of Guarantee

Root rights increase the risk of malware infection as applications gain access to system partitions to minimize threats:

• 🛡️ Install AFWall+ for controlling network access of applications.
• 🔍 Regularly check your system for viruses with Malwarebytes.
• 🔑 Turn it off. ADB over Wi-Fi in the developer settings, if not used.

If you need to return the device under warranty, roll back to the stock firmware:

1. Download the latest stable firmware for Redmi Note 7 from Xiaomi website.
2. Sweat it through the Mi Flash Tool in clean all mode.
3. Lock the bootloader again via the Mi Unlock Tool (Lock option).

After that, there will be no traces of root rights and unlocking, but the warranty will only be valid if the seal on the case is not damaged.

💡

Remember that unlocking the bootloader officially cancels the warranty on the software part of the device, but not on the hardware (screen, battery, etc.).

FAQ: Frequent questions about root on Redmi Note 7