Reboot on Xiaomi Redmi 7A: how to restart the smartphone correctly

Xiaomi Redmi 7A is one of the most popular budget devices of the brand, but even it sometimes hangs, slows down or requires a forced reboot. Reboot can solve many problems, from a hung screen to errors after the MIUI update. However, not all users know how to do it correctly without risking losing data or aggravating the situation.

In this article, we will discuss three official ways to reboot Redmi. 7A — From a simple soft reboot to a reboot through Recovery Mode, you will also learn what errors can occur when you do wrong, how to avoid a brick (completely inoperable device), and what to do if the phone does not respond to buttons. MIUI 12/13/14 — They are different from the old versions of the firmware.

If your Redmi 7A is stuck on the Xiaomi logo, doesn't turn on or is not stable, don't panic. 90% of the time, it's a proper reboot, and the key is to follow the instructions and not miss important steps.

1.Soft reboot: standard reboot

This is the safest and most recommended way, and doesn't affect user data.A soft rebut is used when the smartphone is running, but there are lags, hang-ups or minor crashes in apps.

How to do this:

1. Hold the power button (located on the right end of the Redmi 7A) for 2-3 seconds.
2. On the screen will appear menu with options to Turn off, Reboot and Emergency mode.
3. Slip on Reboot and confirm the action.

If the screen is not responsive to touch, but the phone is on, try connecting the charger — sometimes it "wakes up" the display. Also check if the mode in your pocket is activated (it blocks random taps).

Is the phone connected to the PC (turn off) USB-cable)|

Battery charge above 5% (low charge possible failures)|

No physical damage to the power button |

Is it off? VPN Power saving modes (they can block the menu)-->

The normal reboot time is 20 to 40 seconds, and if the process takes longer than a minute, it is an occasion to use other methods (see the following sections).

2. Forced reboot (Hard Reboot)

If the Redmi 7A is completely frozen, does not respond to touch or power button, a forced rebuke is required, which simulates battery extraction (although it is not removable in the Redmi 7A) and resets all temporary processes.

Instructions:

1. Hold the power button for 10-15 seconds until the screen goes out.
2. Release the button and wait 5-10 seconds.
3. Press the power button again to turn on the phone.

On the Redmi 7A with MIUI 14 firmware, the forced rebuke can only work after 20 seconds of holding the button, a feature of the new version of energy saving. If the phone does not turn on after releasing the button, plug it into charging for 10 minutes, then try again.

⚠️ Note: Do not use this method more than 1 time a day. Frequent forced reboots can lead to wear of flash memory and reduce the life of the device.

3.Reboot via Recovery Mode

If soft and forced reboots didn’t help, and the phone is turning on but is unstable, try rebooting through Recovery Mode, which is also useful if you need to reset to factory settings or flash the device.

Step-by-step:

1. Turn off the phone (hold the power button until the screen goes out).
2. Press the buttons at the same time: Volume up (+) Power

Hold them for 8-10 seconds until the Mi logo and Recovery menu appear.

Reboot

Reboot to System

If the menu is in Chinese, focus on the icons:

- Reboot;

- Data reset (do not choose this item without need!)

💡

In Recovery Mode Redmi 7A, the volume buttons work as up/down and the power button works as OK. Press them carefully, without jerking, so you don't miss the point.

⚠️ Warning: Do not choose Wipe Data or Factory Reset in recovery unless you plan to completely reset.

4. Reboot when hanging on the Xiaomi logo

If Redmi 7A is turned on but “stuck” on the Mi logo or download animation, this may indicate:

Damage to system files after updating;

- Application conflict;

- Hardware failure (less often).

What to do:

1. Wait 10-15 minutes – sometimes the system itself recovers after a long load.
2. If the screen does not change, make a forced rebut (see section 2).
3. If the phone is stuck on the logo again, go to Recovery Mode (section 3) and select Wipe Cache Partition.This won't delete your data, but it can fix the problem.

If nothing works, you'll have to reset to Factory Reset or reflash the device via Fastboot, which are discussed in the next section.

Yes, after the update. MIUI|

Yeah, for no apparent reason.|

No, never.|

I don't know what it is.-->

Extreme measures: dumping and flashing

If standard rebooting methods have not helped and the phone is not stable, consider the following options: Warning: these actions will delete all data from the device!

Method 1: Factory Reset via Recovery

1. Go to Recovery Mode (Loud buttons)+ + Nutrition).
2. Select Wipe Data → Wipe All Data (or → in Chinese firmware).
3. Confirm the action and wait for the completion (it will take 2-5 minutes).
4. Select Reboot to System.

Method 2: Fastboot Fastboot Fastboot Fastboot Fastboot Fastboot Fastboot Fastboot Fastboot Fastboot Fastboot Fastboot Fastboot Fastboot Fastboot Fastboot Fastboot Fastboot Fastboot Fastboot Fastboot Fastboot Fastboot Fastboot Fast Fastboot Fastboot Fast Fastboot Fast Fastboot Fast Fastboot Fast FastBoat Fast Fast Fast FastBoat

You will need a computer with Xiaomi drivers installed and the Mi Flash Tool, which is used if the phone doesn’t turn on at all or if it gives you a No command error in recovery.

1. Download the official firmware for Redmi 7A (codename pine) from MIUI Download.
2. Unpack the archive and connect the phone turned off to the PC, keeping Volume down + Power (Fastboot mode).
3. In the Mi Flash Tool, select the firmware folder and click Flash.

Connect the phone to the PC, and if the computer recognizes it, the problem is in the screen, and if it doesn't, it may be a damaged bootloader.