Rebooting the Xiaomi Redmi Note 7 is a procedure that every user will face sooner or later, including a scheduled reboot to update the system, a forced reboot when hanging up, or a diagnostic reset before selling the device, but not everyone knows that an incorrect reboot can lead to data loss, malfunctions, or even a “bricking” of the phone.
In this article, we will analyze all the current ways of rebooting for Redmi Note. 7 (model M1901F7G, M1901F7H and other modifications), including soft restart, hard reset and reboot to mode Fastboot/Recovery. We will pay special attention to the nuances associated with firmware MIUI 14 and newer versions where the reboot algorithms may differ from the older instructions.
If your Redmi Note 7 has stopped responding to pressing, slows down or needs to restart after an update, you will find proven solutions here, and for those who are afraid of losing data, we have prepared a checklist for saving information before rebooting.
1. Soft reboot: standard reboot without data loss
The soft reboot is the safest way to reboot the Redmi Note 7 if the phone is responding to taps.This method doesn't delete data or reset settings, but simply restarts the system. Suitable for eliminating minor glitches, updating apps or cleaning RAM.
To perform a soft reboot:
- Press and hold the power button (located on the right end of the device).
- In the menu that appears, select Reboot (or Restart if the interface is in English).
- Confirm the action by pressing OK.
If the screen doesn’t respond to touch, but the phone is on, try the combination:
Power button + volume button (hold 10-15 seconds)Redmi Note 7
💡
If the phone still brakes after a soft reboot, check the free space in memory. For stable operation of MIUI, at least 2-3 GB of free space is required.
2. Hard reboot: what to do if the phone freezes
Hard reset is used when the Redmi Note 7 is no longer responsive to presses, the screen is black or getting stuck on the Xiaomi logo, and unlike soft reboots, this method forcibly shuts down power, which can lead to the loss of unsaved data in open applications.
Instructions for hard reboot:
- 🔋 Hold the power button for a while. 20-30 seconds until the phone vibrates and turns off.
- 🕒 Wait. 10-15 seconds, then press the power button again to turn on the device.
- ⚡ If the phone does not respond, connect it to the charger on 5-10 minutes, then try again.
If the hard rebuke didn’t work and the Redmi Note 7 still doesn’t turn on, the problem may be a dead battery or a damaged firmware, which requires a reboot to Recovery mode (see next section).
⚠️ Attention: Frequent hard reboots can cause wear and tear on flash memory. Do not use this method unnecessarily.
3.Reboot to Recovery Mode: Reset to Factory Settings
Recovery mode on Redmi Note 7 allows you to reset to factory settings, clear cache or install firmware manually, which is useful if the phone:
- 🔄 I was stuck on the download (endless logo Mi).
- 📱 Does not respond to soft/hard rebuke.
- 🔧 Requires a complete reset before selling.
To access Recovery Mode:
- Turn off your phone (use a hard rebate if necessary).
- Press the power button + volume button at the same time.
- Hold them until the Mi logo and Recovery menu appear on the screen.
In the Recovery menu you will see the following options (navigation is done by volume buttons, the choice is by power button):
| Item | Description | When to use |
|---|---|---|
| Reboot | A normal reboot. | If the phone is frozen but no reset is required |
| Wipe Data | Reset to factory settings (deletes all data!) | Before sale or in case of critical failure |
| Wipe Cache | Cache cleanup (app data is not deleted) | If the phone is slowing down but is stable |
| Connect with MiAssistant | Connecting to a PC for firmware | If you need to re-flash the device |
⚠️ Note: Wipe Data deletes all data, including photos, contacts and apps. Before using, back up through Settings → The phone. → Backup.
Backup of important data
Charge your phone at least 50%
Make sure that SIM-card and memory card removed (if you need to save data)
Remember your Mi Account (required to unlock after resetting)-->
4.Reboot to Fastboot Mode: for firmware and recovery
The Fastboot mode on the Redmi Note 7 is used to flash through your computer, unlock the bootloader or restore the system after a serious crash. Unlike Recovery, it requires a PC connection and special utilities (Mi Flash Tool, ADB).
How to get into Fastboot Mode:
- 🔌 Turn off the phone.
- 🎵 Press the power button. + volume-cut.
- 🖥️ Hold until the image of a hare in a hat-eared hat appears on the screen (Fastboot logo).
In this mode, the phone does not load the system, but waits for commands from the PC.
- 💻 Install Xiaomi drivers USB Drivers.
- 📂 Download firmware for Redmi Note 7 (for example, Fastboot-ROM from the official Xiaomi website).
- 🛠️ Use the Mi Flash Tool or commands ADB.
Important: Unlocking the bootloader via Fastboot resets all data and requires an account to be linked to Mi. Without this, the phone will turn into a “brick” after firmware.
What happens if you interrupt the firmware in Fastboot?
5. Automatic reboot after MIUI update
Xiaomi Redmi Note 7 often restarts automatically after installing MIUI updates. This is a normal process, but sometimes it can be delayed or end in error.
- 🔄 It has been stuck on the Mi logo for more than 10 minutes.
- 📉 He started to warm up a lot.
- 🔴 Shows the error Update failed.
Try the following steps:
1. Wait at least 15-20 minutes. The first download after the update can take a long time due to the optimization of applications.
2. Forced to restart the phone (hard reboot).
3. If the error repeats, clear the cache via Recovery:
- Go to Recovery (see Section 3).
- Select Wipe Cache.
- Reboot the phone.
If the problem persists, it is possible that the update was installed with errors, in which case a re-running through Fastboot or a rollback to a previous version of MIUI will help.
💡
Updates by air" (OTA) Sometimes they conflict with user settings. If the phone gets buggy after the update, try resetting the network settings to Settings. → SIM-maps and mobile networks → Resetting network settings.
Rebuttal to specific problems
Sometimes a Redmi Note 7 reboot is required to fix specific faults.
| Problem. | Recommended type of rebut | Additional action |
|---|---|---|
| The phone can't see. SIM-map | Soft reset | Check the correct installation of SIM, clear the contacts |
| Apps fly out or don't open | Cleaning the cache through Recovery | Update problematic apps on Google Play |
| The phone's not charging. | Tough reset | Try another charger, check the USB port |
| Screen flickering or artifacts | Reboot to Safe Mode | Remove newly installed applications |
To log in to Safe Mode on Redmi Note 7:
- Turn off the phone.
- Press and hold the power button.
- When the Mi logo appears, release the power button and immediately press the volume down.
- Hold on until the phone boots with the Safe mode label at the bottom of the screen.
Only system applications are running in Safe Mode, and if the problem has gone away, it's one of the apps you installed, uninstall the recently added programs, or reset.
7. Frequent errors in rebooting and how to avoid them
Many users make mistakes when rebooting the Redmi Note 7, which leads to additional problems.
🔹 Interrupt the upgrade process if the phone is restarted for installation OTA-Update, don't force it to be turned off, it could damage system files, wait until it's done or at least 20-30 minutes if the process is delayed.
🔹 Ignoring backup. Before resetting through Recovery, many people forget to save data. As a result, photos, messages and settings are lost. Always use Settings. → The phone. → Backup or cloud services (Mi Cloud, Google Drive).
🔹 Use of informal firmware. Firmware customization ROM Using Fastboot without unlocking the bootloader or checking compatibility often leads to "bricking (XDA Developers).
🔹 Wrong button combination. For example, some users confuse volume increase and volume decrease when entering Recovery or Fastboot. Always specify the current combination for your model.
⚠️ Warning: If the Redmi Note 7 doesn't turn on after a failed reboot, don't try to disassemble the phone yourself. Contact the service center - the problem may be a damaged plume or power controller.