How to unlock Xiaomi Redmi Note 8T: all working methods of 2026

Did you forget the password from Xiaomi Redmi Note 8T or the phone locked after unsuccessful attempts to enter a pattern lock? This situation is familiar to many smartphone owners — according to statistics, one in five users at least once faced with a problem locking the device. Fortunately, you can unlock the Redmi Note 8T in several ways, and not all of them require a complete data reset.

In this article, we will look at 5 proven unlocking methods, including official solutions from Xiaomi and alternative approaches for complex cases. You will learn how to bypass the lock through the Mi Account, restore access using Recovery mode, and what to do if the phone requires a password after firmware.

Importantly, the methods vary in complexity and consequences, for example, a Fastboot reset will delete all data, and a Find Device unlock can only work when the Internet is active, and we will analyze each option in detail so that you can choose the best one for your situation.

1 Unblocking through Mi Account (official method)

The safest way to unlock the Redmi Note 8T is to use a Xiaomi account, which works if:

• 📱 The phone is connected to the Internet (Wi-Fi or mobile data)
• 🔑 Remember the username and password from the Mi Account
• 📲 The device was not reset to factory settings

Instructions:

1. On the lock screen, tap the button "Forgot your password?" (or a similar inscription at the bottom of the screen).
2. Select the Unlock option via Mi Account.
3. Enter your email/phone and password from your Xiaomi account linked to your device.
4. Confirm unlocking via SMS or email (if two-factor authentication is enabled).

⚠️ Note: If you have previously disabled sync with Mi Account or performed a reset via Recovery, this method will not work.

💡

If you do not remember the password from Mi Account, restore it on the official website account.xiaomi.com via a linked email or phone. Do not use third-party services to "hack" the account - this can lead to locking the device.

2. Recovery Mode reset (without password but with data loss)

If you lose access to your Mi Account and your phone is locked, you get a hard reset through Recovery mode, which will delete all the data on your device, including photos, contacts, and apps you installed.

Step-by-step:

1. Turn off the Redmi Note 8T with a long press on the power button.
2. Press the Power button + Volume up simultaneously and hold for 10-15 seconds until the Mi logo appears.
3. From the Recovery menu, select the language (usually English by default).
4. Go to Wipe Data → Wipe All Data and confirm the action.
5. After reset, select Reboot → Reboot to System.

Turn off the phone from charging.

Make sure the battery is at least 30% charged.

Prepare a backup of important data (if you have access to another device)

Remember the data from the Google account that was linked to the phone

-->

⚠️ Note: Some of the Redmi Note firmware 8T After resetting via Recovery, you may need to enter a password from your previous Google account (FRP-If you don't remember this data, you'll have to use additional methods to circumvent it. FRP (described below).

3. Unlock via Fastboot (for advanced users)

If standard methods don’t work, you can try unlocking the Redmi Note. 8T It's a Fastboot mode. It requires a computer, USB-cable and basic command line knowledge!

Tools required:

• 💻 Computer with Windows/Linux
• 🔌 Original. USB-cable (preferably from the set)
• 📦 Mi Flash Tool (download from the official website)
• 📱 Firmware for Redmi Note 8T (Fastboot version)

Instructions:

1. Install Xiaomi drivers on your computer (you can use the Mi Flash Tool).
2. Turn off the phone and put it in Fastboot mode: press the Power button + Volume down.
3. Connect the device to a PC. Android Bootloader Interface should appear in the Device Manager.
4. Launch the Mi Flash Tool, select the downloaded firmware and press Refresh (the device must be determined).
5. Press Flash and wait for the process to complete (5-10 minutes).

⚠️ Note: After Fastboot, the phone may require authorization to the Mi Account if the account was previously linked, in which case you will need to enter data from this account or use the method of bypassing. FRP (described in the following section).

Through the Mi Account.

Reset to Recovery

Fastboot/EDL

Find Device (remote)

Never blocked your phone.

-->

FRP (Factory Reset Protection) bypass after discharge

If you reset via Recovery or Fastboot Redmi Note 8T This requires data from a previous Google account. FRP-Factory Reset Protection is activated automatically if you have added a Google account and enabled sync.

Officially, you can only bypass FRP by knowing the username and password from the previous account, but there are legal ways to restore access:

Method 1: Through Xiaomi Service Center

• 📄 Provide a check or box from the phone (proof of possession).
• 📞 Contact the official service center.
• 🔧 The wizard will unlock through special software (free or for a nominal fee).

Method 2: Use of Mi FRP Tool (for power users)

This method requires:

1. Download the Mi FRP Bypass Tool (available on forums like XDA-Developers).
2. Connect your phone to your PC in Fastboot mode.
3. Run the utility and follow the instructions on the screen (usually you need to enter the command fastboot oem frp-unlock).

💡

Bypassing FRP through third-party utilities can break the warranty and cause the phone to run unstable. Use this method only if other options are exhausted.

5 Remote unlocking via Find Device (if the phone is online)

If your Redmi Note 8T is connected to the Internet and it has Find Device enabled, you can try unlocking it remotely, which works even if you don't remember the Mi Account password, but requires:

• 🌐 Active Internet connection on the phone (Wi-Fi or mobile network).
• 🔒 Access to a Mi Account linked to the device.
• 📍 Geolocation enabled (not necessary, but increases the odds).

Instructions:

1. Go to i.mi.com and log in.
2. In the Devices section, select your Redmi Note 8T.
3. Press Find the device. → Delete the data.
4. Confirm the action - the phone will reset to the factory settings remotely.

⚠️ Note: After a remote reset, you may need to re-authorize your Mi Account when you first turn on. If you don't remember your account data, this method won't help you bypass the lock completely.

6. Alternative methods (for specific cases)

If none of the above methods worked, consider these options:

A. Unlocking via ADB (if USB debugging is enabled)

If USB debugging was previously activated on the phone, you can try to delete the password file via ADB:

adb shell


su




rm /data/system/gesture.key




rm /data/system/password.key




reboot

After restarting, the screen lock should reset.

B. Update the firmware through OTA with blocking bypass

Sometimes installing an Over Air Update (OTA) through Recovery mode helps:

1. Download the official OTA-Update for Redmi Note 8T (file extension).
2. Put him on. SD-card (if the phone supports the phone).
3. In Recovery mode, select Apply update from SD card.
4. After the update, the lock may be reset.

C. Contacting the service center with proof of purchase

If the phone is guaranteed, provide the service center:

• 📄 Check or guarantee card.
• 📦 Phone packaging.
• 🆔 Passport (for proof of identity).

Service engineers will be able to unlock the device without losing data.

💡

Before visiting the service center, check to see if the warranty period has expired. For the Redmi Note 8T, the standard warranty is 12 months from the date of purchase.

FAQ: Frequent questions about unlocking Xiaomi Redmi Note 8T