How to Unblock Xiaomi If You Forgot Your Google Account Password: Full Guide 2026

Forgotten password from Google account on Xiaomi smartphones is one of the most common problems that users face after resetting settings or buying a used device. FRP (Factory Reset Protection blocks access to your phone, requiring you to enter a login and password from a previously linked account, without which your smartphone becomes a brick, even if you know it. PIN-lock-screen.

In this article, we will discuss all the current ways to bypass FRP on Xiaomi, Redmi and POCO devices (including the models from 2023-2026), and explain why some methods stopped working after the MIUI 14/15 updates. Importantly, not all solutions are suitable for new firmware – we will specify the limitations and risks of each option.

Why Xiaomi requires a password from Google after a reset

FRP (Factory Reset Protection) protection was introduced by Google in Android 5.1 Lollipop as a measure against smartphone theft. On Xiaomi devices, it works like this:

🔒 When you first turn on or after a Hard Reset, the phone requests data from the last Google account linked to it.
📱 If you bought a used smartphone and the previous owner did not untie the account, it is impossible to unlock it without a password in standard ways.
⚠️ Nana MIUI 14/15 added additional verification through Xiaomi servers, which complicates the bypass FRP.

According to statistics of service centers, more than 60% of the requests to unlock Xiaomi are related to the forgotten password from Google, not to the user. PIN-On new models (for example, Xiaomi 14 or Redmi Note 13 Pro)+) Getting around protection is more difficult because of hardware data encryption.

⚠️ Note: If you bought a smartphone with your hands and can not contact the previous owner, the only legal way to unlock is to provide a check of purchase to the Xiaomi service center. ₽).

Method 1: Unlocking with Mi Account (if tied)

If you have a Mi Account attached to your phone (not to be confused with Google!), you can try to restore access through it, a method that works for Xiaomi and Redmi of all generations, but requires:

📧 Access to email or phone number linked to Mi Account.
🌐 Stable Internet connection (Wi-Fi or mobile network).
🔄 Google Password Screen (not all models allow you to switch to Mi Account).

Instructions:

On the FRP lock screen, click Forgot your password? (if you have such an option).
Select Login via Mi Account (some firmware may call it Another Login Method).
Enter the email or phone associated with your Mi Account and follow the instructions to restore access.
After successful entry, the system will offer to create a new PIN-code.

On models with MIUI 13+, this may not work because of the changed login logic. If the Mi Account button is not available, try other methods.

📊 What kind of smartphone you Xiaomi?

Redmi Note 12/13

POCO X5/F5

Xiaomi 13/14

Redmi 10/11

Another model

Method 2: Bypass FRP through Fastboot (for advanced users)

This method is suitable for devices on MIUI 12-14 and requires a computer with ADB/Fastboot drivers installed.The point is to temporarily disable FRP verification through Fastboot commands, but it does not work on all models.

What you need:

💻 PC Windows/Linux and installed Platform Tools.
🔌 USB-cable (preferably original).
📱 Smartphone with a charge of at least 30%.

Step-by-step:

Turn off your phone and press the Power button + Volume down to log into Fastboot Mode.
Connect your smartphone to your PC and open the command line (cmd) in the folder with the platform-tools.
Enter the command to check the connection: fastboot devices If the device is determined, continue.
Run the command to unlock the bootloader (on some models this will reset the data!): fastboot oem unlock-go
If the team doesn’t work, try the alternative: fastboot erase frp.
Reboot your phone with the command: fastboot reboot

On newer models (Xiaomi 13T, Redmi Note 12 Pro+), these commands may not work due to locking at the firmware level, in which case only firmware via EDL (see Method 4) will help.

Install drivers ADB/Fastboot|Download Platform Tools|Charge the phone. >30%|Prepare original USB-cable|Check the model for compatibility-->

Method 3: Using a vulnerability in MIUI (for old firmware)

There was a bug on devices with MIUI 10-12 that allowed you to bypass FRP through an emergency call, which does not work on all models, but can help owners of Redmi 8/9, Xiaomi Mi A2/A3 and other devices from 2018-2020.

Instructions:

On the FRP lock screen, press Emergency Call.
Enter the combination ##4636## (the test menu will open).
Go to Settings → General → Reset settings.
Reset to factory settings (data will be deleted!).
After the reboot, the phone should not require a Google password.

⚠️ Attention: MIUI 13+ This is a blocked method, the system automatically closes the test menu, and trying to type in other engineering codes (e.g. ##7780##) is pointless: they either don't work or they result in a complete reset without getting around. FRP.

Alternative option for some models:

📞 On the emergency call screen, enter the number 112 and immediately press Back.
🔄 Quickly go to Settings → The phone. → Version. MIUI (tap on it 7 times to activate the developer mode).
🔧 Back to Settings → Additionally. → For developers and enable debugging by USB.
💻 Connect your phone to your PC and use it. ADB remove FRP (Adb shell content insert --uri content://settings/secure --bind name:s:user_setup_complete --bind value:s:1).

Method 4: Extreme Download Mode (EDL)

EDL-The mode is an emergency boot mode that allows you to flash a phone even with a locked bootloader.The method works on 90% of Xiaomi devices, but requires you to use it:

💻 PC with Mi Flash Tool or QFil.
📄 Firmware file in.tgz or.mbn format for your model.
🔌 Cable USB Type-C with data support (not all cables are suitable!).
🔋 Battery charge of at least 50%.

Step-by-step:

Download the firmware for your model from the official Xiaomi website (choose the Fastboot version).
Install the Mi Flash Tool and unpack the firmware into a folder without Cyrillic characters.
Turn off your phone and press Volume Up + Volume Down + Power for 10-15 seconds to enter EDL Mode (the screen will remain black!).
Connect your phone to your PC – a Qualcomm HS-USB QDLoader 9008 device should appear in Device Manager.
In the Mi Flash Tool, select the firmware folder, press Refresh, then Flash.
Wait for the firmware to finish (5-10 minutes) and restart the phone.

Warnings:

⚠️ Firmware through EDL Delete all data without recovery.
⚠️ On some models (Xiaomi) 12S Ultra, Redmi K50) You need an authorized Mi Account to unlock EDL.
⚠️ The wrong firmware can turn your phone into a brick».

What if the Mi Flash Tool can't see the phone?

1. Make sure that the Qualcomm QDLoader driver is installed (you can download from the QFil Tool site). 2. Try another one. USB-cable (preferably original from Xiaomi). 3. Launch the Mi Flash Tool on behalf of the administrator. 4. If the phone is not identified, try pressing the Volume buttons up. + Power for 30 seconds, then plug in the cable. 5. On some models (POCO F4, Redmi Note 11) requires short circuit test points on the board for forced entry into the EDL.

Method 5: Officially Unblocking through Service Center

If none of these methods work, you can contact the official Xiaomi service center, which is the most reliable, but also the most expensive method (1500 to 3 000). ₽ model-wise).

What will be required:

📄 Check or contract of sale (if the phone used).
🆔 Passport of the owner.
📱 The device itself with a charge of at least 20%.

The unlocking process takes 1 to 3 days, and the service center sends a request to Xiaomi servers, where the associated Google account is untied from the device's IMEI, and then the phone can be configured as new.

Xiaomi model	The cost of unlocking (₽)	Date(days)	Whether a check is required
Redmi Note 10/11/12	1 500–2 000	1–2	Yes (if I'm b/w)
Xiaomi 11/12/13	2 000–2 500	2–3	Yes.
POCO X3/X4/X5	1 800–2 200	1–2	No (if new)
Xiaomi 13T/14	2 500–3 000	3	Yes.

⚠️ Warning: Unofficial services offer cheaper unlocking (from 800) ₽), They often use illegal methods (such as substitution). IMEI), This can lead to network blocking or update issues, and the official service guarantees that the phone will not lose functionality.

💡

Before visiting the service center, take a screenshot of the screen with IMEI (type *#06#) and the serial number (on the box or under the battery) to speed up the unlocking process.

Frequent Mistakes and How to Avoid Them

When trying to unlock Xiaomi without Google password, users often make critical errors that can permanently disable the phone.

🔌 Use of non-original cable - leads to failures when firmware is being run through Fastboot/EDL. Always check the cable on another device.
📥 Download firmware from unofficial sources – such files may contain viruses or be incompatible with your model.
🔋 Low battery unlock – if the phone turns off while firmware is running, there is a high risk of “filling».
🔧 Attempting to open the phone without experience – on new models (Xiaomi 13, Redmi Note 12) for entry into the phone EDL Sometimes it is necessary to close the test points on the board, which without skills leads to damage to the contacts.

Another common problem is the wrong firmware choice, like flashing a Xiaomi 12 Lite file with a Xiaomi 12 file, and the phone will stop turning on.

📌 The exact name of the model in Settings → About the phone (or on the box).
🌍 Firmware region: Global (EEA), China (CN), India (IN).
🔢 Version MIUI (for example, V14.0.3.0.TLCEUXM).

💡

If the phone doesn’t turn on or hangs on the logo after firmware, don’t panic: try flashing it through EDL with the Clean All tick in the Mi Flash Tool.

FAQ: Answers to Frequent Questions

Can I unlock Xiaomi without losing data?

No, all ways of circumventing FRP (except for official unblocking at the service center) result in a complete data reset, and if the phone had important files, you can try to retrieve them via ADB in Recovery mode, but only if USB debugging is enabled.

Does the way with SIM-circumnavigation FRP new Xiaomi?

No, not on some models before. 5/6) could be inserted SIM-map, call the phone and through the call menu to get to the settings. MIUI 13/14 This bug is fixed.

What if the phone asks for an old PIN instead of a Google password?

This means that the phone was installed. PIN-lock screen code, not FRP. In this case: Try to enter the last used PIN. If you don’t remember, run Hard Reset via Recovery Mode. + Volume up.Once reset, the phone may require a Google password (if the account was linked).

Can you bypass FRP on Xiaomi with the Mi Account Unlock Tool?

No, most of these programs (like the Mi FRP Bypass Tool or Xiaomi Tool V2) are either not running on new firmware or are fraudulent. They can: Install malware on your PC, demand payment for unlocking, but not perform it, lock the phone permanently (for example, erase the modemst1/st2 partition, which will lead to the loss of IMEI), use only official tools (Mi Flash Tool, ADB) or contact the service.

How to check if your Google account is untied from Xiaomi before buying a used phone?

Before you buy, do the following steps: Ask the seller to do Hard Reset with you (Settings → About Phone → Reset). After the reset, turn on your phone and go to the setup stage. If the system requires you to enter a password from Google, the account is not untied. Check the FRP status through Fastboot: fastboot getvar all If the output is frp-state: locked, the phone is locked. If the seller refuses to reset, most likely, he hides the lock.