How to reboot Xiaomi Mi TV Stick: everything from soft restart to emergency reset

Xiaomi Mi TV Stick is a compact device for converting a regular TV to a smart TV, but even this technique sometimes fails, with a hung interface, unanswerable apps, or sudden errors causing users to look for ways to reboot. Unlike smartphones, where it is enough to press the power button, TV-consoles are becoming more complicated: there is no physical key on, and incorrect actions can lead to loss of settings or even a device brig.

In this article, we have 5 proven ways to reboot the Mi TV Stick (including the Mi TV Stick 4K and Mi TV Stick Basic models), from a standard menu restart to a forced reset when completely inoperable. We also look at how to avoid typical errors, why the console may not respond to commands, and what to do if the sound or image is lost after the reboot. We have added interactive checklists, warnings and answers to frequent questions for convenience.

1. Soft reboot via the settings menu

The safest way is to use the built-in functions of the system, which is suitable if the console responds to remote commands, but is unstable (brakes, applications fly out, etc.).

To make a soft restart:

• 📺 Press the Home button on the Mi remote TV Stick.
• ⚙️ Go to Settings. → The device → Reboot.
• 🔄 Select Reboot and confirm the action.

It takes about 30 to 60 seconds, and after you restart, all settings and applications will be saved, and if this method doesn't work (the menu doesn't open or the console doesn't respond), move on to the next method.

💡

If the remote doesn’t work after the reboot, try removing the batteries for 10 seconds or connecting the keyboard via Bluetooth via the phone. USB-television-port.

2. Forced reboot with a button on the body

The Xiaomi Mi TV Stick has a hidden reset button on its body, which helps in cases where the device is completely frozen, it is located on the side or on the bottom panel (depending on the model) and is usually marked by a small hole that says RESET.

Emergency reset instructions:

1. 🔌 Turn off the power to the console USB-port.
2. 📍 Find the button. RESET (You may need a flashlight).
3. 🖊️ Take a paper clip or toothpick, press and hold the button for 10-15 seconds.
4. 🔌 Connect the console back to the power without releasing the button, and hold it for another 5 seconds.
5. ⏳ Wait for the system to boot (can take up to 2 minutes).

If the console is loaded into recovery mode after this procedure, it means that the reset to the factory settings was performed, in which case you will need to reset the Wi-Fi and Google account.

Disconnect the console from power |Prepare a paperclip/dental cleaning |Find the RESET button |Hold the button 10-15 seconds |Connect power without releasing the button-->

3. Reboot via remote (alternative method)

If the settings menu is not available but the remote is responsive to clicks, you can try a button combination to force reboot. This method works on most Mi TV Stick models, but is not officially dokumented.

Procedure:

1. 🎮 Press and hold the Home buttons. + Back at the same time.
2. 🕒 Hold them for 5-7 seconds until the screen goes out.
3. ⏳ Wait 30 seconds – the console should restart automatically.

If the combination doesn’t work, try replacing the Back button with Volume+, which simulates a hardware reset but without losing data.

4.Reboot via ADB (for power users)

If you're familiar with Android Debug Bridge (ADB), you can reboot the console via the command line, which is useful if the Mi TV Stick is connected to a PC or laptop but does not respond to remote commands.

Step-by-step:

1. 🖥️ Connect the device to the computer through USB-cable (use the port) OTG prefixed).
2. 📥 Install. ADB Tools and open the command line.
3. 🔍 Enter the command to check the connection: adb devices (the name of your device should be displayed).
4. 🔄 Reboot the command: adb shell reboot

If the console is not defined in adb devices, try to enable debugging over USB in the developer settings (Settings → Device → About TV → Build Number – press 7 times to activate the developer mode).

💡

ADB-Reboot is the only way to take back control of the console if it boots, but the remote and buttons don’t work.

5. Reset to factory settings (extreme case)

If no one is working, and the console is constantly hanging or producing errors, then all that remains is a complete reset, which will delete all the apps, accounts and settings installed, returning the device to its original state.

How to perform the reset:

• ⚙️ Through the menu: Settings → The device → Resetting settings → Erase everything.
• 🔧 Through the button RESET: Hold her down. 20 (a) the second the power is connected (after the 10 The console will go into recovery mode, where you need to select Wipe data/factory reset).

Once reset, the console will require reconfiguration, including a Wi-Fi connection and a Google account login. If you forget data from an account associated with the device, you may need to bypass FRP (Factory Reset Protection).

💡

Before reset, record or photograph your Wi-Fi settings, list of installed apps, and account details, saving time after rebooting.

Table: Causes of freezes and solutions

Frequent Mistakes and How to Avoid Them

Many users are making problems worse by doing the wrong thing. Here are 3 critical mistakes and ways to prevent them:

⚠️ Attention, never remove the console from the USB-This can cause irreparable damage to the system and require flashing through the Fastboot.

Other common lapses:

• 🔌 Using an unoriginal power supply can cause unstable operation. Always use a charger with parameters. 5V/2A.
• 📶 Disconnecting from Wi-Fi during reset will cause an activation error.
• 🔄 Frequent forced reboots reduce the life of flash memory, use them only in extreme cases.

If the sound or image is missing after the reboot, check:

• 🔊 Volume settings on the remote and in the console menu.
• 📺 Correct connection HDMI-Cable (try another port on your TV).
• 🎯 Screen resolution in settings (Settings) → Display and sound → Permission).

FAQ: Answers to popular questions