Why Xiaomi TVs may require a forced reboot
Xiaomi TVs based on Android TV or Google TV (Mi TV 4S, Mi TV Q1, Mi TV A Pro, etc.) sometimes “hang” so that even the remote control will not react. The reasons are diverse: from overheating of the processor after a long work to the conflict of firmware after an automatic update. In 80% of cases, a simple reboot helps, but what if there is no remote control at hand?
In this article, we’ll look at 5 proven ways to reboot a Xiaomi TV without a remote, from mechanical buttons on the case to tricks with a router and a mobile app. Importantly, the Reset button method on the back will reset everything to factory settings – use it only as a last resort!
Before you start, check the obvious:
- 🔋 Power: Make sure the cable is connected to the socket and TV tightly (sometimes the contacts are oxidized).
- 📶 Network: If the TV is connected over Wi-Fi, try to turn off the router for 30 seconds - sometimes it "wakes" the system.
- 🔄 HDMI-chain: if you use it HDMI-CEC, Turn off all devices (configures, sound bars) – they can block commands.
Method 1: Hardware power button on the body
The most reliable method is to use a physical button on your TV, and most Xiaomi models have it located on them:
- 📺 Right or left on the lower frame (for models Mi) TV 4S 55" and similar).
- 🔲 Behind the logo (Mi's) TV Q1 mi TV A Pro).
- 🔍 Under infrared receiver (rarely, but found in older versions).
Reloading instructions:
- Find a button – it can be touch-sensitive (reacts to touch) or mechanical (presses with a click).
- Press it for 10-15 seconds until the power indicator starts to blink or goes out.
- Release the button and wait 30 to 60 seconds for the TV to restart.
☑️ Check before pressing the button
⚠️ If the button does not respond, do not press it with force - on models Mi TV P1 mi TV ES It's connected to the board with thin plumes that are easily damaged.
| Xiaomi model | Type of power button | Location. | Notes |
|---|---|---|---|
| Mi TV 4S (all sizes) | Mechanical | Down below right | Frequently fades – clean the dust |
| Mi TV Q1/Q2 | Sensory | Under the logo at the back | Reacts only to prolonged touch |
| Redmi Smart TV | Mechanical | Down below left | May require clicking. |
| Mi TV A Pro | Sensory | Right under the frame | It doesn't work with wet hands. |
Method 2: Reboot via the Mi Home app (smart models only)
If your Xiaomi TV is connected to the Mi Home ecosystem (such as MiOT models), you can reboot it via a mobile app, which works even if the TV is getting stuck on the download screen.
Step-by-step:
- Open the Mi Home app on your smartphone (available for Android and iOS).
- Make sure your Xiaomi account is tied to your TV (if not, add the device via Add → TV).
- Select your TV from the list of devices.
- Slip on the three points in the upper right corner → Settings of the device.
- Scroll down and click Reboot (or Restart in English).
If the option to restart is not available:
- 🔄 Update the Mi Home app to the latest version.
- 📱 Check that your TV and phone are connected to the same Wi-Fi network.
- 🔒 Make sure you have device administrator rights in Mi Home.
💡
If the TV doesn’t show up in Mi Home, try reconnecting it: press the Power + Volume button down on the case for 5 seconds to reset the network settings.
⚠️ Warning: After rebooting via Mi Home, the TV may request re-authorization in some apps (e.g. Netflix or YouTube.
Method 3: Control via router (disconnecting power over the network)
If your Xiaomi TV is connected to your router via Wi-Fi or Ethernet, you can trick it into simulating the loss of the internet, a technique that works because many smart TVs automatically reboot when the network connection is broken.
Instructions for routers Xiaomi, TP-Link, ASUS:
- Open the router’s web interface (usually at 192.168.0.1 or 192.168.1.1).
- Find the Device Management (DHCP Clients List) section.
- Find your TV (by name MiTV-XXXX or MiTV-XXXXX) on the list. MAC-address).
- Click Block (or Disconnect) and this will break the connection.
- Wait 2-3 minutes, the TV should restart.
Alternative option for advanced users:
ping 192.168.x.x -t # (replace x.x with your TV's IP)
In another terminal window, do:
arp -a | find "IP_ TV"
Copy MAC- address and block it via router| Mark the router | The Way to Device Management | Offline option |
|---|---|---|
| Xiaomi Mi Router | Devices → Connected devices | Block it. |
| TP-Link | DHCP → DHCP Clients List | Disconnect |
| ASUS | Network Map → Clients | Block |
| Keenetic | Devices → List of devices | Prohibit access |
Why does this method not always work?
Method 4: Use USB-Keyboards or mouse (for Android) TV)
Xiaomi Android TVs support USB keyboard or mouse connectivity via USB-A port. If you have one, you can reboot the TV via the system menu.
How to do this:
- Connect the keyboard or mouse to USB-TV port (usually located on the side or back).
- If the screen is getting stuck, but the mouse cursor appears, right-click and select Settings.
- Go to Settings → Device → Reboot (the path may vary depending on the version of Android TV).
- Confirm the reset.
Key combinations for emergency reboot (if menu is not available):
- 🔑 Ctrl + Alt + Del – will call the reboot menu (works on Mi) TV 4A newer).
- 🔄 Alt + F4 — Closes the current application (sometimes defrosting the system).
- 🖱️ Holding the left mouse button for 10 seconds simulates a long press on the remote.
💡
The USB keyboard should be USB-A (wireless via Bluetooth will not work). If the USB port does not respond, check it on another device — it may be disabled in the TV BIOS.
Method 5: Hard reset via Reset button (extreme case)
If none of these methods work, you'll have to reset the hardware through the Reset button, and it'll bring the TV back to factory settings, removing all the apps, accounts and personal data you've installed, and only use this method if the TV doesn't respond to the commands completely.
Where is the Reset button:
- 🔍 On most models there is a small hole in the back with the inscription RESET (need a paperclip or toothpick).
- 📌 On Mi. TV Q1 mi TV A Pro - under the lid near the ports HDMI.
- ⚠️ On Redmi Smart. TV button AV-Enter – Press and hold it for 15 seconds.
Resetting instructions:
- Turn off the TV from the outlet.
- Press and hold the Reset button with a paper clip.
- Without releasing the button, connect the power back.
- Hold Reset for another 20 to 30 seconds until the Xiaomi logo appears.
- Release the button and it starts to reset.
⚠️ Warning: After a hard reset, the TV will require re-setting, including connecting to Wi-Fi and logging in to your account Google/Xiaomi. Prepare the data for entry in advance!
What if the TV doesn’t turn on after reset?
How to avoid hanging out in the future: 5 tips
To prevent Xiaomi TV from hanging up again, follow these recommendations:
- Update your firmware: Go to Settings → About TV → Update at least once a month. Outdated versions of software often contain bugs that lead to freezes.
- Limit background processes: In Settings → Apps, turn off autoplay for unnecessary services (e.g. Mi Video or Game Center if you don’t use it).
- Use stable power: Connect the TV through a network filter – power surges can damage the board and cause crashes.
- Clean the cache: Every 2-3 months, go to Settings → Storage → Clear the cache. Clogged cache is a common cause of brakes.
- Turn off unnecessary devices: If you are connected to the TV HDMI-devices (confixes, sound panels), turn them off when simple - they can conflict with the system.
It is also worth checking the energy saving settings:
- 🔋 Go to Settings. → Screen and sound → Energy saving regime.
- 📉 Choose High Performance (if Cost-Efficiency is the case, the system may fall asleep incorrectly).