Xiaomi Redmi Note 8 Pro is one of the most popular smartphones of the brand, but even it is not immune to system failures. Screen freeze, black screen of death, endless loading or complete non-responsiveness to touch — these problems are faced by many users. In 80% of cases, it is not hardware breakdowns that are to blame, but software conflicts: overloaded cache, firmware errors or “glutty” applications.
Most people's biggest mistake is panic and chaotic behavior. Some people start pushing buttons in a row, some try to pull out the battery (which is impossible on the Redmi Note 8 Pro because of a non-removable battery), and some just wait for the smartphone to run out. All of these approaches are either useless or dangerous. In this article, 7 proven ways to reboot, from the softest to "heavy artillery" (including entering Recovery Mode), as well as a table of causes of hanging and tips for prevention.
1.Soft reboot: when the smartphone responds to touch
If the Redmi Note 8 Pro screen isn’t completely frozen, but just slows down or doesn’t open apps, try standard methods. They won’t cause data loss and are suitable for most “light” crashes.
- 🔄 Reboot via the Power Menu: Press the Power button for 2-3 seconds until the menu appears. Select Reboot (if the menu does not open, proceed to the next method).
- 📱 Closing of "hang" applications: swipe up from the bottom edge of the screen and hold to open the list of active applications. Close them all one by one.
- 🔋 Disconnect/connect charging: sometimes the failure is caused by a power controller conflict. Connect your smartphone to charging (or disconnect if it is already charging) - this can "wake up" the system.
If the problem recurs after a soft reboot, check the free memory (in Settings → Memory) and the device temperature (use the AIDA64 app). Overheating above 50°C or memory occupancy above 90% are direct reasons for hanging.
💡
If your smartphone responds to touch, but very slowly, try turning on Developer Mode and turning off window animation. To do this, 7 times click on the Build Number in Settings → About Phone → Settings → Additional → For developers, set the Windows Animation Scale on Off..
2. Forced reboot: Power + Volume Up button
The most versatile way for the Redmi Note 8 Pro is through a combination of buttons, which works even when the screen is completely black or bootloop, and it's important that it doesn't delete data, but it interrupts all processes.
Instructions:
- Press the Power and Volume Up buttons (+) at the same time.
- Hold them for 10-15 seconds until the screen goes out and vibration starts (a power reset sign).
- Release the buttons – the smartphone will restart automatically.
If the device is then getting stuck on the Redmi logo again, repeat the procedure 2-3 times in a row. Sometimes the system needs to be "overclocked" to start correctly.
Try another combination: Power + Volume Reduction (-)
Connect the charge and try again - sometimes there is not enough power to reset
If the buttons are physically damaged, use the battery discharge method (see Section 5).
-->
3.Recovery Mode Login: When a Regular Reboot Doesn't Help
If the Redmi Note 8 Pro is stuck on the MI logo or cyclically rebooted, you will need a Recovery Mode. Here you can cache or reset to factory settings (with loss of data!).
How to log in to Recovery:
- Turn off your smartphone (if it’s on, use the forced reboot from Section 2).
- Press the power and increase the volume (+) at the same time.
- When the Mi logo appears, release Power, but keep holding Volume Up until you see the Recovery menu.
In the Recovery menu, use volume buttons for navigation and power for selection.
- 🧹 Wipe Data – Complete reset (deletes all data, including accounts and files!).
- 🗃️ Wipe Cache – Cache cleanup (safe, data not affected).
- 🔄 Reboot - a normal reboot.
What happens if the Recovery Mode does not open?
4.Reset via Fastboot: for power users
If the smartphone doesn't boot even in Recovery, it's Fastboot mode, which is a low-level mode that allows you to reflash the device through your computer. For the Redmi Note 8 Pro, it's critical to use the firmware for the begonia model (the code name of the device) - another firmware will turn the phone into a "brick".
Step-by-step:
- Install on PC Mi Flash Tool and Xiaomi drivers (download from the official website).
- Turn off your smartphone, then press Power + Volume Down (-) to enter the Fastboot (a hare in a hat-out-of-the-box will appear).
- Connect your phone to your PC through USB-cable.
- In the Mi Flash Tool, select the downloaded firmware (.tgz format) and press Flash.
It takes 5-10 minutes, and after flashing it back to factory settings, it's important that this method deletes all data, including photos and messages!
⚠️ Attention: Don't turn it off USB-If the process stalls during the waiting for device, check the cable (better use the original) or port. USB PC-only.
5. Battery discharge: the last method
If none of these things work, and the smartphone doesn't respond to even the button combinations, it leaves the battery completely drained, and this works because at zero charge, the power controller resets all the processes.
How to discharge Redmi Note 8 Pro forcefully:
- Connect your smartphone to charging and wait until it heats up (this will speed up the discharge).
- If the screen is turned on, activate maximum brightness and run a resource-intensive application (such as a game).
- Leave the device in this state for 6-12 hours until it turns off on its own.
- After full discharge, connect the charging - the smartphone should turn on in normal mode.
The downside is that you have a long wait and a risk of a battery being discharged, which reduces its lifespan, and only use it if other methods have failed.
Table of causes of hangings and decisions
To prevent repeated crashes, it is important to understand the root cause of the freeze, and below are the most common cases for the Redmi Note 8 Pro and how to fix them.
| Reason. | Symptoms | Decision |
|---|---|---|
| Cache overflow | Slow work, lags when opening applications | Cleaning the cache through Recovery or in Settings → Memory |
| Conflict of applications | Freeze after installing new software | Removing the last installed applications in Safe Mode |
| Damaged firmware. | Cyclical restart (bootloop), errors in the update | Fastboot or Recovery Fastboot |
| Overheating | Spontaneous shutdowns, brakes when charging | Cleaning from dust, replacement of thermopaste (in the service) |
| Faulty memory card | Floating when working with files, reading errors | Formatting or Replacing a MicroSD |
7. Halt prevention: 5 rules for the Redmi Note 8 Pro
Compliance with simple recommendations will reduce the risk of failure by 90%:
- 📵 Do not update your firmware over the air with a low charge (less than 50%). MIUI, avoid beta firmware.
- 🧹 Clean the cache once a month through Settings → Memory. → Cleaning or Security App.
- 🔌 Avoid cheap charges – they cause voltage surges leading to failures of the power controller.
- 📱 Do not install applications from unknown sources (enable Prohibit installation from unknown sources in security settings).
- 🔄 Reboot the smartphone once every 3-4 days – it resets the background processes that accumulate in memory.
If the freezes are repeated regularly, check the battery health in AIDA64 (Battery Section → Status).Health below 80% is a signal to replace the battery.
💡
On the Redmi Note 8 Pro is most often hanging due to a conflict with firmware based on Android 10/11. If after upgrading to MIUI 12+ there are lags, roll back to the stable version via Fastboot.