How to reset the scooter Xiaomi: 3 ways to completely reset to factory settings

Resetting the Xiaomi scooter to factory settings is a procedure that may be needed in a variety of situations: from preparing for sale to fixing software failures. However, incorrect zeroing actions often lead to device locking, loss of connection with the application or even physical failure of the controller. In this article, we will discuss all the current methods of resetting for models. M365, Pro, 1S, 3, 4 Pro and others, and how to avoid common errors.

Many users confuse soft reset with full reset, which erases all settings, including binding to the Mi Home account. If you plan to sell a scooter, you can not do without a full reset - otherwise the new owner will not be able to connect to the device. On the other hand, zeroing will not solve problems with mechanical malfunctions (for example, worn-out bearings or a discharged battery), but will help with "glitch" electronics: sudden blackouts, communication errors or improper display operation.

1.Reset preparation: what to do before zero

Before you start resetting, make sure you follow all the preliminary steps, and failure to comply with these conditions may make it impossible to reconnect with the scooter after resetting.

First, check the battery: the level should be at least 30%. When the charge is low, the device can turn off during the procedure, which can damage the firmware. Second, prepare a smartphone with the Mi Home app installed (or Xiaomi Scooter for new models) and a stable Internet connection. If the scooter is tied to the account, you will need login data.

Also, you should record or photograph your current settings in advance if you plan to restore them after resetting.

• 🔋 Driving mode (Eco, Standard, Sport)
• 🔒 Lock password (if installed)
• 📱 Linked devices (if the scooter is synchronized with multiple smartphones)
• ⚡ Power saving settings (e.g., automatic shutdown after 10 minutes of inactivity)

If the scooter doesn't turn on or respond to the power button, try a forced reboot first: press the power button for 10-15 seconds. In 80% of cases, this solves the problem without the need for a complete reset.

💡

If the scooter Xiaomi M365 pro 1S misstep E014 (The problem with the controller, the reset may not help, and this requires a diagnosis at the service center.

2. Method 1: Reset via the official Mi Home app

The safest and most recommended method is zeroing through a proprietary app, which is suitable for all models that support Bluetooth connectivity (including the Xiaomi Mi Electric Scooter 3 and 4 Pro).

Instructions are Step-by-step:

1. Open the Mi Home app and go to the section with your scooter.
2. Slap the icon. ⚙️ Settings (or Device Management in New Versions).
3. Scroll down and select Reset (or Untie the device).
4. Confirm the action by entering the password from the Xiaomi account.
5. Wait until the process is complete (usually takes 1-2 minutes).

Once reset, the scooter will automatically untie the account and be re-tied. If the app does not have a reset option, upgrade the Mi Home to the latest version or try an alternative method.

Method 2: Hardware button reset (for all models)

If the scooter doesn't connect to the phone or the app doesn't see the reset option, you can reset it manually through a combination of buttons. M365, Pro, 1S, Essential and 4 Pro. The main thing is to follow the sequence exactly.

Step-by-step:

1. Turn off the scooter (press the power button for 3 seconds).
2. Press the power button and the brake button (on the handle) at the same time.
3. Hold them down. 5–7 the second until the white light is lit (on the M365) or not to be heard (in the case of a Pro/1S/4 Pro).
4. Release the buttons. The scooter will start the reset process (the indicator will flash red and green).
5. Wait for the reboot (it will take up to 30 seconds).

After successful reset, the scooter will return to factory settings, including:

• 🔄 Resetting the binding to the Mi Home account
• 🔑 Deletion of user password (if installed)
• ⚡ Return to standard driving modes (Eco by default)
• 📡 Reset Bluetooth and Wi-Fi settings (for models with modules)

Important! On some models (e.g. Xiaomi Mi Electric Scooter 3), the button combination may be different. If the scooter doesn't respond, try holding only the power button for 10-15 seconds.

💡

Hardware reset does not remove the firmware, but only returns the settings to the factory. If the scooter "blocked" after a failed update, you will need to flash the firmware (method 3).

Method 3: Flashing through STM32 CubeProgrammer (for advanced programs)

If the scooter does not turn on, does not respond to buttons or gives critical errors (for example, E015 — Firmware damage, may require complete flashing of the controller, this method is only suitable for users with experience in working with the controller. STM32-Microcontrollers and require special equipment.

What you need:

• 💻 Windows computer (or virtual machine)
• 🔌 STM32 CubeProgrammer (download from STMicroelectronics official website)
• 🔧 USB-TTL adapter (e.g, CP2102 or FT232)
• 📁 Firmware for your model (download from Xiaomi forums or 4PDA)
• 🔩 Screwdriver for disassembling the scooter (to access the controller board)

Step-by-step process:

1. Remove the bottom cover of the scooter and find the connector UART on the controller board (usually 4 contacts: GND, TX, RX, 3.3V).
2. Connect. USB-TTL Adapter to connector, observing polarity: Adapter → Payment GND → GND TX → RX RX → TX 3.3V → 3.3V (Not necessarily if the power comes from the battery)
3. Launch it. STM32 CubeProgrammer, select a port and swipe a file with the.bin or.hex extension.
4. Once completed, disable the adapter and assemble the scooter.

Flashing through STM32 erases all data, including the serial number and controller calibration. After the procedure, the scooter may require reconfiguration at the Xiaomi service center.

💡

Before the firmware, make a backup of the original firmware through STM32 CubeProgrammer (Read option) This will help restore the scooter if something goes wrong.

Table: Comparison of discharge methods for different models

6. Common mistakes and how to avoid them

Even when following the instructions, users often encounter problems, and let's look at the most common mistakes and ways to solve them.

Mistake 1: The scooter does not drop through the buttons

If nothing happens after the buttons are held:

• 🔋 Check the battery charge (should be) >30%).
• 🔌 Try to press the buttons longer (10-15 seconds).
• 🛠️ Some models (Xiaomi 4 Pro) require pre-loading the scooter before resetting.

Error 2: After resetting the scooter does not connect to the Mi Home

Possible causes:

• 📱 Outdated version of the app (update Mi Home in the App) Store/Google Play).
• 🌍 Incorrect region of your account (try changing to China).
• 🔄 Scooter requires re-binding: remove it from the list of devices and add again.

Mistake 3: There was an error E014 or E015 post-discharge

These codes indicate firmware damage.

• 🔄 Repeat the hardware reset 2-3 times.
• 💻 If it doesn’t help, you need to re-flash through the STM32 (3-way).
• 🛠️ In rare cases, the memory of the controller is damaged - you need to replace the board.

💡

If after the reset of the scooter Xiaomi M365 misstep E010, This means that the problem with BMS (Resetting the battery won't help here, you need a battery diagnosis.

⚠️ Note: If the scooter was bought from hand and the previous owner did not untie it from his account, resetting through the buttons will not help. In this case, you will need official unlocking through the Xiaomi service center (you need a check or a sales contract).

7.What to do after reset: adjustment and calibration

After successful zeroing, the scooter returns to the factory settings, but that doesn't mean it's ready to use.

1. Re-association to the Mi Home account:

1. Open the app and tap Add the device.
2. Select the category Transport → Electric scooter.
3. Follow the instructions on the screen (scanning may be required) QR-scooter).

Calibration of the accelerometer (for models with display):

If after reset the scooter incorrectly shows speed or "float" readings, perform calibration:

1. Put the scooter on a flat surface.
2. Press the power button for 5 seconds until the indicator flashes.
3. Release the button and wait until the end (the indicator will light up in green).

3. setting personal parameters:

• 🔐 Set a new lock password (if required).
• 🚀 Choose the driving mode (Eco, Standard or Sport).
• ⚡ Set up energy saving (for example, automatic shutdown via 5/10/15 minute).

Checking the working capacity:

After setting up, be sure to test:

• 🔋 Charging (plug the charger and make sure the indicator is lit red).
• 🎛️ Brakes (electronic and mechanical).
• 📶 Connection to the application (check the display of speed, charge, errors).

⚠️ Note: On Xiaomi 4 Pro and 3 models after reset, calibration may be lost KERS (If the scooter is jerking or does not recover energy during braking, recalibrate through the application or service center.

8. Frequently Asked Questions (FAQ)