How to go to the settings of the Xiaomi router: all ways to log in in 2026

Introduction: Why you need access to the control panel of the router

Xiaomi routers are among the most popular devices for home networking due to their combination of price, performance and functionality. However, many users have difficulty logging in to the web management interface first. Without access to the admin panel, you won’t be able to set up a Wi-Fi network, change your password, update your firmware, or activate additional features like guest network or parental controls.

In this article, we will discuss all the current ways to log into the settings of Xiaomi routers (including the Mi Router models). 4A, 4C, AX3000, AX6000 And others, look at common errors and give recommendations for fixing problems, and focus on security issues, such as why you use a standard password. admin/admin After the first setup, it can lead to hacking your network.

Method 1: Entering through the web interface IP-address

The most universal method is the use of IP-The default for most Xiaomi models is 192.168.31.1 or 192.168.0.1:

1. Connect to the router network – via Wi-Fi or via Ethernet cable.
2. Open any browser (Chrome, Firefox, Edge) and type in the address bar 192.168.31.1.
3. Enter your login and password (admin/admin by default if you have not changed them).

If the page does not open, check:

• 🔌 Correct connection to the router network (wi-fi indicator or LAN burn).
• 🌐 No typos in IP-Address (frequent error: 31.1 and 0.1 confused).
• 🔒 Turn it off. VPN Proxies – they can block access to the local network.

If you've changed before IP-router address and forget it, use the command in the terminal (for Windows):

ipconfig | findstr "Principal Gateway"

For macOS/Linux:

netstat -rn | grep default

💡

If the router is new and has never been set up, try connecting to its Wi-Fi network with the name Xiaomi_XXXX — Password is usually shown on the sticker at the bottom of the device.

Method 2: Sign in via Mi Wi-Fi (Mi Home)

Xiaomi is offering the official Mi Wi-Fi app (formerly part of Mi Home), which makes it easier to manage a router from a smartphone, a method that is convenient for users who prefer mobile devices.

Instructions:

1. Download the Mi Wi-Fi app from the App Store or Google Play.
2. Connect to the router network (Wi-Fi or via cable with USB-C/Ethernet adapter).
3. Run the app and follow the Connection Wizard, and the system will automatically find your router.
4. Enter the login/password (by default — admin/admin).

Advantages of this method:

• 📱 Convenient interface with adaptation to mobile screens.
• 🔔 Notifications of new firmware and security threats.
• 🌍 Remote control (if the function is activated in the settings).

⚠️ Note: Mi Wi-Fi may not support older router models (e.g. Mi Router 3.

Method 3: Sign in via Mi Account (Xiaomi account)

If you have linked a router to your Mi Account, you can log in to your settings through login, which is useful if you have forgotten your local administrator password.

Steps:

1. Go to the entrance page on the IP-address (192.168.31.1).
2. Select Sign in with Mi Account (or Sign in with Xiaomi).
3. Enter your email/phone and password from your Xiaomi account.
4. Confirm your login via SMS or email (if two-factor authentication is enabled).

This method only works if:

• 🔗 Router was tied to an account earlier.
• 📶 The device has access to the Internet (to verify account data).
• 🔐 Two-factor authentication does not block login (check account settings at account.xiaomi.com).

Solving Entry Problems: Frequent Errors and Resolving Them

Even with the right actions, users are faced with errors, and let's look at the most common cases and how to fix them.

If the router does not respond to reset (the Reset button does not work), try:

• 🔌 Turn off power for 30 seconds, then turn on again.
• 🔧 Use a pin to press the reset button (sometimes the button is recessed deep).
• 💡 Connect the router to another power source (possibly the power supply is faulty).

⚠️ Warning: Resetting your factory settings will remove all your settings, including Wi-Fi passwords, guest network and parental controls. IP login-password admin/admin.

Check the connection to the router network|Make sure that IP-address entered correctly|Try another browser or device|Reset the settings if you forget your password-->

Security: How to protect the router control panel

After successfully logging into the settings of the Xiaomi router, the first thing to do is to ensure its protection (admin/admin) Everyone knows, including potential attackers.

Minimum safety measures:

• 🔐 Change the administrator password to a complex one (at least 12 characters, with numbers and special characters).
• 🔄 Disable remote access to the control panel (System section) → Remote Management).
• 🛡️ Enable encryption. WPA3 Wi-Fi (if supported by your model).
• 🔄 Regularly update the router firmware (System section) → Firmware Update).

Additional recommendations:

• 📡 Turn it off. WPS — This protocol is vulnerable to brute force attacks.
• 📋 Keep a log of connected devices (Advanced section) → DHCP Clients List).
• 🔗 Change the standard. IP-router address (e.g. 192.168.10.1) to protect against network scanning.

💡

Using a standard admin/admin password after setting up the router is equivalent to no password.Attackers can access your network in minutes.

Features of entry for different models Xiaomi

While most Xiaomi routers use similar login principles, some models have nuances.

For models that support Mesh networks (for example, AX3000 or AX6000), the input to the settings may differ:

• 📶 When connecting to a Mesh node, you may need to specify the main router.
• 🔄 Settings are synchronized between nodes, but some settings (such as guest network) are set up separately.

If you have Xiaomi Mi Router Pro or other rare models, check the documentation – some of them use alternatives. IP-addresses (192.168.1.1) or require special software to configure.

Frequently Asked Questions (FAQ)