How to go to the admin panel of the Xiaomi router: all ways and solutions to errors

Owning a Xiaomi router opens up access to advanced network settings, but many users face difficulties when first logging into the admin panel. AX6000 Wi-Fi 6 or budget Mi Router 4A — The authorization process has general principles, but it has its own nuances. IP-Addresses, login and password you can not change the network name, configure guest access or update firmware.

This article will help you understand how to securely log into the web interface of the Xiaomi router, even if you forgot the login details or encountered a 404 error. We will look at all the current methods, from standard browser login to alternative methods using the Mi Wi-Fi mobile application.

If you haven't changed your default settings before, it's only 2-3 minutes, but what if the router doesn't respond to the standard 192.168.31.1 or asks for an unknown password?

1. Standard way to enter the admin Xiaomi

Most of Xiaomi routers use universal IP-The address for accessing the control panel is 192.168.31.1 or miwifi.com. This method works for all modern models, including: AX6000, AX3000, 4A Gigabit Edition and older versions like Mi Router 3. You will need any device (PC, laptop, smartphone) connected to the router network via cable or Wi-Fi.

Step-by-step:

1. Make sure your device is connected to the Xiaomi router network (the Wi-Fi icon should show an active connection).
2. Open any browser (Chrome, Firefox, Edge) and enter one of the options in the address bar: 🌐 192.168.31.1 (principal address) 🌐 miwifi.com (alternative domain name) 🌐 192.168.0.1 (for some older models)

Enter

If the page does not load, check:

• 🔌 Connect to a router (try reconnecting or using an Ethernet cable).
• 🔄 Reboot the router (turn off power for 30 seconds and turn on again).
• 🛡️ Shutdown VPN or proxy in the browser (they can block access to the local network).

Check the router's network connection | Disable VPN/proxy in your browser |Try another browser (e.g. Chrome) |Reboot the router with a button on the case

-->

2. default login and password for Xiaomi

Factory credentials for Xiaomi routers depend on the model and year of release. For most modern devices (after 2018), the dynamic authorization system is used: instead of a fixed password, the system requests data from the Mi Account account to which the router is associated, this applies to the models AX6000, AX3000, 4A Gigabit, etc.

For older models (until 2018, for example, Mi Router 3 or Mini) there are standard combinations:

Important! If you do not remember the password from Mi Account, restore it on the official website account.xiaomi.com. For routers with an account binding, resetting the settings to the factory will not help - you will need to untie the device through Xiaomi support.

3. Log in via the Mi Wi-Fi mobile application

The official Mi Wi-Fi app (available for Android and iOS) offers an alternative way to manage your router without having to remember. IP-This method is especially convenient for users who prefer to configure the network from a smartphone. The application automatically finds the router on the local network and offers to log in via Mi Account.

How to log in via the application:

1. Download Mi Wi-Fi from Google Play or App Store.
2. Connect your smartphone to the network of the Xiaomi router.
3. Open the app and select your router from the list of detected devices.
4. Sign in via Mi Account (the same account used in the first setup).

Linking a router to a Mi Account is mandatory for models AX-Without it, you won't be able to access advanced settings, including parental controls and guest network.

If the application does not find the router:

• 📶 Check that the smartphone is connected to the Xiaomi network (not to the neighboring Wi-Fi).
• 🔄 Restart the application and router.
• 🛠️ Update the router’s firmware via the web interface (if available).

💡

If you have multiple Xiaomi routers on the same network (e.g., main + repeater), they will be displayed separately in the Mi Wi-Fi app. To avoid confusion, rename them in network settings.

4. Solving problems with entering the adminka

Even with the right one. IP-Users often encounter errors in their address and password. Let's look at the most common cases and how to fix them.

Mistake. 1: Page won't open (ERR_CONNECTION_TIMED_OUT)

• 🔌 Check the physical connection: If you use a cable, try another port. LAN router.
• 📡 Make sure you are connected to the router network, not to the mobile Internet.
• 🔄 Reset your browser cache or try another one (like Firefox instead of Chrome).

Error 2: Incorrect login/password

• 🔑 For new models (AX6000, 4A 2023) Use data from Mi Account.
• 📄 Look at the password on the sticker at the bottom of the router (relevant to the 4A/4C).
• 🔄 If you forget your password, reset your settings (see next section).

Error 3: Router blocked after multiple failed attempts

⚠️ Note: After 5-10 incorrect login attempts, the Xiaomi router may temporarily block access to the admin for 5-15 minutes. In this case: Wait for the specified time and try again. If the lock is not removed, reset the Reset button on the case.

To diagnose the problem, check:

• 💡 Are the indicators on the router burning (power, Wi-Fi, Internet).
• 📡 Does your device see the router's Wi-Fi network (if not, a power or antenna problem).
• 🔌 Does the Internet work on other devices (if so, local problem).

💡

If the router does not respond to the reset button Reset, try to hold it for 15-20 seconds, this will force reset to factory settings, but will remove all user settings (including the binding to Mi Account).

5. Resetting Xiaomi router to factory settings

If you lose access to the admin panel and can’t recover your password, the only way out is to reset your settings completely, which will bring the router back out of the box by removing all personal data, including your network name, Wi-Fi password, and your Mi Account binding (for models without mandatory authorization).

How to perform the reset:

1. Find the Reset button on the back of the router (usually it is recessed in the case).
2. Take a paperclip or toothpick and press the button, holding it for 10-15 seconds.
3. Release the button when the indicators on the router start flashing or go out.
4. Wait for the reboot (1–2 The router will create a new Wi-Fi network with a default name (e.g., a new Wi-Fi network, Xiaomi_XXXX).

What to do after the discharge:

• 🔧 Connect to a new Wi-Fi network (password is indicated on the router sticker).
• 🌐 Log in to the admin at 192.168.31.1 and perform the initial setup.
• 🔄 For models AX6000/AX3000 You will need to re-link to your Mi Account.

⚠️ Attention: Reset settings on Xiaomi routers with MiWiFi firmware ROM (The Chinese version may require the installation of alternative firmware (e.g., Padavan) if the device is locked at the regional level.

6. Advanced settings: what can be done in the admin

Once you successfully log into the control panel, you get access to a wide range of options, and here are the key features that you should explore:

The main sections of the Xiaomi admin:

For experienced users, hidden functions are available:

• 🛠️ SSH-Access: Enabling Remote Control (requires activation in Advanced Settings) → Management).
• 📡 Bridge mode (WISP): Connecting the router to another network as a client (useful for extending coverage).
• 🔗 VPN-server: setup PPTP OpenVPN for secure access to your home network.

Example of setting up a guest network:

💡

To speed up Wi-Fi on Xiaomi routers, in your wireless network settings, select a channel manually (e.g., 44 or 149 for 5GHz) instead of Auto mode, which will help avoid interference from neighboring networks.

7. Update firmware and restore performance

Regular firmware updates on Xiaomi router fix vulnerabilities, add new features and improve stability. However, improper installation can lead to the "bricking" of the device. Consider safe ways to upgrade.

Method 1: Through the Web Interface

1. Log in the admin and go to System → Firmware update.
2. Click Check Updates. If a new version is available, follow the instructions on the screen.
3. Do not turn off the router power during the process (it will take 2-5 minutes).

Method 2: Manually through a firmware file

• Download the official firmware for your model from the Xiaomi Support website.
• In the admin, select System → Manual Update and download the file.
• Wait until the router is finished (the router will restart automatically).

⚠️ Note: Installing unofficial firmware (e.g. Padavan) will void warranty and may lead to unstable operation. Use them only if you understand the risks and have experience in device recovery.

If the router stopped turning on after the update:

• 🔌 Turn off the power for 30 seconds, then turn it on again.
• 🔄 Reset button (hold 15 seconds).
• 📡 If the indicators are not on, check the power supply (maybe a replacement is required).

FAQ: Frequent questions about entering the admin Xiaomi