How to add a Xiaomi router to the Mi Home app: instructions for all models

Connecting Xiaomi router to the proprietary Mi Home app gives you access to advanced management functions: parental control, guest network, traffic monitoring and remote administration. However, many users face difficulties in the addition phase of the device — especially if we are talking about new models like the AX9000 or BE7000, where the process is different from the classic Mi Router 3/4. In this article, we will analyze all the current methods of binding, typical errors and their solutions, as well as the nuances for different versions of the firmware.

It is important to understand that the add-on algorithm depends on three key factors: the router model (Mi, AX or BE series), the firmware region (Chinese, global or European), and the Mi Home application version (Chinese MiJia or international). For example, routers for the domestic market of China often require additional manipulations to change the region in the application, whereas global versions (AX3000 EU) are connected in two clicks. We will look at universal methods that work in 95% of cases, and also focus on “problem” models.

1.Preparation of router for addition to Mi Home

Before you start binding, make sure the router is ready to configure. Most of the add-on errors are due to improper device preparation. Here is a checklist of required actions:

• 🔌 Connect the power and wait for the router to fully load (the indicator should burn blue or orange, depending on the model). AX6000 and newer download takes up to 2 minutes.
• 📶 Turn off mobile internet on your phone and connect to the router network (default name — Xiaomi_XXXX or MiWiFi_XXXX). The password is on the sticker below.
• 📱 Update the Mi Home app to the latest version (minimum supported 6.5.400 for Android and 6.4.0 for iOS.
• 🌐 Check the region of your account in Mi Home: it should match the region of the router’s firmware. For global models, choose Russia or Europe, for Chinese models, China Mainland.

If your router is purchased in China (there are characters on the box) and Russia is selected in the application, the device simply will not appear in the list of available for add, in which case you will have to change the account region (instruction below) or flash the global version of the software.

2. Step-by-step instruction: Adding a router to Mi Home

When the preparation is complete, we move on to the main process. Consider the universal algorithm that works for most models (Mi Router 4A, AX3000, AX6000, etc.):

1. Open Mi Home and log in (if not already logged in). On the home screen, tap the + icon in the upper right corner.
2. In the search bar, type the name of the router model (e.g., AX3000). If the device is not located, select the Routers category.
3. The annex will offer two options for adding: 🔄 Quick connection (recommended) – the router is automatically determined by MAC-address. 🔍 Manual input - will need to enter SSID and the router network password manually.

restart

Wi-Fi

Guest network

If the router is not automatically in step 3, try resetting it to factory settings (press the Reset button for 10 seconds) and repeat the process. For the AX9000 and BE7000 models, you may need to update your firmware through the web interface (192.168.31.1) before adding it to the Mi Home.

💡

If the router isn't added via Mi Home, try using Xiaomi's alternative WiFi app (available for Android).It often works better with new models but has fewer features to manage.

3. Solving common errors when adding

Even with proper preparation, users are faced with errors, and below is a table of the most common problems and their solutions:

The device is not supported, and it often occurs when you try to add a Chinese router model (e.g., the AX3600 CN) to the international version of the Mi Home.

1. Change your account region to China Mainland (instructions in the next section).
2. Swipe global firmware through a web interface (risky for beginners, can lead to “bricking”).

4. How to change region in Mi Home for Chinese routers

If your router is for the Chinese market (there are characters on the box, the model ends in CN), it can not be added to Mi Home with Russia or Europe.

1. Open Mi Home and go to Profile → Settings → Region.
2. Select China Mainland and confirm the shift.Caution: After the region change, all previously added devices will disappear from the list (they can only be returned after switching back).
3. Close the app and clear its cache (in phone settings: Apps → Mi Home → Memory → Clear cache).
4. Go to Mi Home again, log in and try adding a router.

Note the Security section, where you can turn on Fireall, block malicious sites, and alerts for suspicious activity. The AX6000 and later have IoT Protection, which protects smart devices from being hacked.

If you need advanced settings (like Port Forwarding or DMZ), they are easier to configured via a web interface.

7. Frequent Questions and Answers (FAQ)

If your question is not covered in the FAQ, check the official documentation for your model on the mi.com website or contact Xiaomi via the chat in Mi Home. Specify the exact router model and firmware version (you can find out in the web interface) - this will speed up the solution.

💡

Always check the relevance of the router firmware before contacting Xiaomi for support. 60% of the time, problems are solved by simply updating the software through the web interface (192.168.31.1).