How to log into the settings of the Xiaomi Mi router: all ways and solutions to errors

Xiaomi Mi Router (series 4, 4A, 4C, 5, 6 and others) offer a wide range of network configuration options, but to activate them you first need to access the device's web interface. Many users face difficulties already at this stage: the router does not open the authorization page, the standard login / password is not suitable, then the standard login / password is not suitable, IP-The web interface address is unknown. In this article, we will discuss all the current ways to log into the Xiaomi Mi Router settings - from basic to alternative methods for non-standard situations.

Xiaomi routers are a feature that regularly updates firmware and management interfaces. For example, in new models (starting with the Mi Router 5 and AX6000), the web panel may look different than in the old Mi Router 4A. We took these nuances into account and prepared universal instructions that work regardless of the firmware version.

Preparation for entering the router settings

Before you try to log into the web interface, make sure that the basic conditions are met:

• 🔌 The router is connected to the power source and is on (the power indicator is on or flashing).
• 📡 Your device (PC, laptop, smartphone) is connected to the router network via Ethernet cable (recommended) or Wi-Fi.
• 🌐 The device is offline. VPN, Proxies and other tools that change network settings.
• 🔄 The browser is updated to the latest version (recommended Google Chrome, Mozilla Firefox or Microsoft Edge).

If you connect over Wi-Fi, make sure you are in a confident reception zone. Weak Wi-Fi can cause a connection to break during authorization. For Xiaomi Mi Router 4C and 4A Gigabit Edition models, it is especially important to use cable connection when you first sign in, which minimizes the risk of errors.

Standard way of entering through IP-address

The main method of accessing settings - input IP-The router addresses in the browser address bar. For most models of Xiaomi Mi Router, the following addresses are used:

To enter the settings:

1. Open the browser and enter 192.168.31.1 (or an alternate address from the table).
2. Press Enter. The authorization page should open.
3. Enter your login and password. It's the default: 🔑 Login: admin 🔑 Password: Admin or field is left blank (depending on model).

If the page does not open, check:

• 🔗 Correctness of the input IP-Addresses (frequent error - typos or extra characters).
• 🔌 Connection to the router (indicator) LAN/WAN flash).
• 🔄 Absence of conflict IP (If there is another router on the network with the address 192.168.31.1).

Connecting to a router via cable or Wi-Fi

Disabling VPN/proxy in the browser

Correct input IP-misspelled

Updating the browser to the latest version-->

Authorization: login and password by default

Standard login credentials depend on the router model and firmware version, and the following are the most relevant information for popular devices:

If the standard login/password is not suitable, it is possible to:

• 🔄 Someone has previously changed credentials (try to remember or reset settings).
• 📱 The router is linked to the Mi Account (relevant to new models), in which case log in via the phone number linked to the Xiaomi account.
• 🔧 A custom firmware (e.g., Padavan) is installed where the input data may differ.

Important: In routers Xiaomi Mi Router 6 and later, sign-in without reference to the Mi Account is impossible. This is a security measure introduced by the company in 2023.

Alternative ways to enter settings

If the standard method doesn’t work, try one of the alternatives:

1. via the Mi WiFi mobile application

Mi WiFi app (available for Android and iOS) allows you to control your router without input IP-Instructions:

1. Download the app from the official store (Google Play or App Store).
2. Connect your smartphone to the router network.
3. Open the app and follow the instructions on the screen (scanning may be required). QR-router-code).

2. Through the domain name miwifi.com

Instead IP-Enter the address in the browser miwifi.com or router.miwifi.com. This method works if:

• 🌍 DNS-Router servers are configured correctly.
• 🔗 The device is connected to the router network (not via the mobile Internet).

3. via Telnet or SSH (for power users)

If the web interface is not available, but the router responds to ping, you can try connecting via Telnet:

telnet 192.168.31.1

Standard credentials for Telnet:

• Login: root
• Password: Admin or an empty field.

💡

If the router is not responding to ping, check the network adapter settings on your PC. IP-address is automatically (DHCP), It's not handwritten.

Solving common errors at the entrance

Even with the right input. IP-There may be errors in the addresses and credentials, and let's look at the most common ones and how to fix them:

1. Page won't open (ERR_CONNECTION_TIMED_OUT)

Causes and solutions:

• 🔌 No physical connection: Check your Ethernet cable or reconnect to Wi-Fi.
• 🔄 Conflict IP-Disable all network devices except router and your PC.
• 🛠️ Firmware failure: Try restarting the router (Reset button for 10 seconds).

2. incorrect login or password (Authentication Failed)

Possible action:

• 🔑 Try to leave the password field blank (relevant to Mi Router) 4C).
• 📱 If the router is linked to Mi Account, log in via phone number.
• 🔧 Reset the settings (press the Reset button for 15 seconds).

3. Redirect to the Internet Service Provider's page

This problem arises if:

• 🌐 The router is configured in bridge mode and does not have its own IP.
• 🔄 The provider uses the binding MAC-address (try to clone) MAC).

💡

If the router still does not let you into the web interface after resetting, check if it has a custom firmware (for example, Padavan), in which case the standard login / password may differ.

Reset router settings to factory

If none of these methods worked, the last option is hard reset, which will return the router to the factory settings, including the username and default password.

Instructions:

1. Find the Reset button on the back of the router (usually it is recessed in the case).
2. Take a paperclip or toothpick and press the button, holding it for 15-20 seconds.
3. Release the button when the indicators on the router start flashing chaotically.
4. Wait for the reboot (1-2 minutes).

After discharge:

• 🔄 Wi-Fi settings, passwords and all user settings will be removed.
• 🔑 Login and password for entry will be reset to the factory (admin/admin erect).
• 📡 You will have to reconfigure the Internet connection (enter data from the provider).

💡

Before resetting, back up your router configuration (if you have access to the web interface). In Xiaomi Mi Router, you can do this in the System → Backup & Restore section.

⚠️ Note: On routers Xiaomi Mi Router 6 and newer reset does not untie the device from the Mi Account. For a complete reset, you will need to contact Xiaomi support.

Additional settings after entry

After successful authorization, it is recommended to perform several basic actions to ensure the security and stable operation of the network:

1. Change your administrator password: Go to System → Password. Set a complex password (at least 8 characters, with numbers and special characters).
2. Firmware Update: Open System → Firmware Upgrade. If a new version is available, install it.
3. Wi-Fi settings: Change the network name (SSID) and password in Wi-Fi → Basic Settings. Select the Wi-Fi 6 standard (802.11ax) if your devices support it.

For models with support for Mesh networks (for example, Mi Router AX6000) additional options are also available:

• 📶 Configuring the main and additional nodes.
• 🔄 Automatic switching between nodes for better coverage.

FAQ: Frequent questions about entering settings